What are
/r/ak47's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/ak47:
The most popular Services mentioned in /r/ak47:
Privacy.com
TeeSpring
Discord
Opera Add-ons
Amino
Codeberg
Emojipedia
Yarn.co
Google Photos
Imgur
Wikimedia Commons
ImgBB
SmugMug
23andMe
Walmart
The most popular Android Apps mentioned in /r/ak47:
The most popular reviews in /r/ak47:
These earmuffs along with these improved ear pads are a good upgrade if you ever want to replace that ear pro.
Just a desiccant. Basically reusable silica gel packet. Drop one of these bad boys in your can, and as long as you keep it shut you've got an unlimited shelf life for your ammo. Link for the ones I think I bought on Amazon below.
https://www.amazon.com/dp/B07Z8ZYJ75/ref=cm_sw_r_cp_apa_fabc_S.6bGbVE9RKVJ?_encoding=UTF8&psc=1
Gun Whiskey Decanter Gift Set by Royal Reserve | Home Bar Decor Liquor Dispenser with Scotch Glasses– Fun Novelty Gift for Men Dad Brother Hunter Boyfriend Husband Anniversary or Retirement 850 ML https://www.amazon.com/dp/B07T8173FB/ref=cm_sw_r_cp_api_glt_fabc_V7600JA8N0FVM9JTKZYC
They will definitely help some with the humidity, it can't hurt.
Honestly I'd just spend the $10-20 on "rechargeable" desiccant packs. When too much moisture builds up you pop them into the oven for an hour or so, or microwave them, and they can be re-used. I have a few guns laying around in carry cases which is not the best idea since they trap moisture and can cause rust. I toss a couple packets in there and keep up with recharging them and cleaning the gun once or twice a year, never had a problem. Same for ammo boxes.
https://www.amazon.com/wisedry-Rechargeable-Desiccant-Indicating-Absorbers/dp/B08493QKRT
23andme is a genetic testing and analysis service where you send them your dna and they tell you where your ancestors originated from. Saying you are half Russian is in reference to the AKM he is shooting since AKM's were invented in Russia. Saying you are half Austrian is in reference to the Glock he is shooting Glocks are manufactured in Austria.
$11.98. CRAFTSMAN Hammer, Fiberglass, 16 oz. (CMHT51398) https://www.amazon.com/dp/B07RRNSFY4/ref=cm_sw_r_em_apa_fabc_99SD4SWMYH84HERRRAQV
Hopefully its just the front site is canted. can you zero it as is?
I wanted to believe this was photoshopped, but if it is somebody has gone to great lengths for a prank. It's a real thing on amazon, though they say it isn't released yet.
How to Talk to Your Cat About Gun Safety: And Abstinence, Drugs, Satanism, and Other Dangers That Threaten Their Nine Lives https://www.amazon.com/dp/045149492X/ref=cm_sw_r_awdo_navT_g_42S512K8ZJK9M57H3MQ4
Amazon has everything BW-100 Freeze Spray - Diagnostic Cooling Spray - Safe for Semiconductors, Capacitors, PCBs and More - Non-Flammable Construction | 7 oz/200g https://www.amazon.com/dp/B089M4Y7NX/ref=cm_sw_r_cp_api_glt_fabc_558T7RRT6XD57M7NT850?_encoding=UTF8&psc=1
Ok then this https://warsawwoodco.com/ak-wood-mlok-install-service/ + this UTG PRO M-LOK(R) Standard QD Sling Swivel Adaptor https://www.amazon.com/dp/B018ZS5A0S/ref=cm_sw_r_cp_api_glt_fabc_5YB447F7AKV7Q1GP08DX?_encoding=UTF8&psc=1
Believe it or not Amazon. Was recommended from a few other people on here. It’s a Russian surplus and has extremely heavy duty hardware and will definitely hold up to some abuse. https://www.amazon.com/OTK-Original-Standard-unissued-Condition/dp/B083VXRBV2/ref=mp_s_a_1_4?dchild=1&keywords=otk+ak+sling&qid=1618350213&sprefix=otk+ak+&sr=8-4
Literally just wondering that myself. I ended up buying this one 5 minutes ago. Went with the 42” because the 36” might be a tad too small.
https://smile.amazon.com/dp/B07F9K72CN/ref=cm_sw_r_cp_api_i_SJcAFb8B2D4NT
For after-range cleaning, Windex is not even needed, I used to use it a decade ago. But now just some warm water (just water or sometimes with some Dawn dish soap) works perfectly well to clean off the corrosive salts after a day of running surplus ammo.
After you've rinsed it off, be sure to dry it off thoroughly and then oil.
Since you already have corroded parts, Hoppes 9 works great - let the part soak in it. Use a nylon of brass brush to help scrape some of the corrosion off. Can also use 0000 steel wool to help, especially on the piston face.
If it's deep corrosion and are planning on repainting the kit before or after reassembly, I recommend EvapoRust. You can get a gallon of it and keep reusing it for a number of projects. Just place the part in a bin with some evaporust overnight, and boom, rust is gone. https://www.amazon.com/Evapo-Rust-Original-contains-non-toxic-biodegradable/dp/B00M0TLQ66
It's cheaper at Lowe's, but I linked exactly what I used. I was going to go with the more rich Russian Blood color with the Rye dye powder mixed with poly, but heard the new formula turns purple. I was hesitant in buying a poly and stain mix because I heard it's hard to use or comes out shitty. But thag was my second coat in the pic and I think it's easy to work with. I wanted the color to be a little more dark so I only lightly sanded my original Wasr furniture enough to get the stain to grab and soak. So far, I'm really liking the results. Can't wait to button it all back together. I'm also in the process of getting my reciever refinished, so it'll be like a brand new rifle to me haha.
Minwax 219804444 Polyshades - Stain & Polyurethane in 1 Step, 275 VOC, 1/2 pint, Bombay Mahogany, Satin https://www.amazon.com/dp/B001OLVP0S/ref=cm_sw_r_cp_apa_i_6phHCbY3W85TV
Had to go out and search, apparently loyalists mark themselves using the yellow tape in order to differentiate themselves from separatists.
It's mentioned here
Probably about $30 you can find the stencils online and then some ultra matte spray paint 🤙🏻
Edit: yea instantly found this stencil for $15
Redleg Camo 14" HEX 3 Piece Camo Stencil Kit https://www.amazon.com/dp/B07BP548K7/ref=cm_sw_r_cp_api_glt_fabc_RFCSQ5Q7Y1DJV1WZKFPX
matte engine block enamel matches the saiga finish pretty well. like this
I got an orion M30c. Thing is amazing and uses green LEDs over a white light with a cover and you can get it in red. I'm honestly thinking about getting a red one as well. https://www.amazon.com/dp/B014MWVORE/ref=cm_sw_r_cp_apa_glt_fabc_NTREFACTY0Y55S0GD2YQ
HSS 14mm x 1 Metric Die Left Hand Thread M14 x 1mm Pitch https://www.amazon.com/dp/B07BSBT44T/ref=cm_sw_r_cp_api_glc_fabc_Y34Z1CFNNXJKWMZM645C?_encoding=UTF8&psc=1
It’s cheap so go slow and use plenty of lube
If you're looking for a jam nut, its M14x1 LH. Looks like all of those are out of stock on that site. Amazon has one here, though. I just left the factory birdcage on mine, despite changing damn near everything else, lol.
Stock looks good brother. I recommend these for your sling. Figure out a way to mount them to your wood. sling mounts
Look for something called rust converter, either at your local auto parts or online, like this.
>AGS Rust Solutions Rust Converter is a high-tech solution for treating and preventing surface rust. AGS Rust Converter applies directly over rust, stopping the rust and converting it to a protective polymeric coating. The converted surface makes an excellent primer base that seals out moisture and prevents future rust and corrosion. After the Rust Converter dries, simply apply any paint or primer. No sanding or mixing required. One quart will convert 50 to 75 spare feet of surface rust.
It isn't cheap but you can buy bottles of Spicy Ketchup
I'd look to get something simple like a Surefire G2X single output paired with an IWC SMC Mlok Mount
I have a similar setup with my WBP Fox.
https://www.amazon.com/gp/product/B07RX283ZK/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&th=1
This is the one I got! Surpringly tall
I have the same M92, same brace, same booster device, same top rail, same red dot. I mounted my brace slightly higher so I can shoot it without it rubbing against my thumb with the brace folded on the left side.
I also got this backpack for it - $29, fits it perfectly, three pockets for magazines. Great for bringing to the range.
https://www.amazon.com/wolfslaves-Tactical-Shoulder-Backpack-Hunting/dp/B07H1FQK4C
Gotcha, well a steel pick set is probably the cheapest of that tool list to pick up. Here is one: https://www.amazon.com/dp/B07SQW4SXL/ref=cm_sw_r_cp_apa_fabc_5od2FbJCAS7TK
Happy smithing! Stay safe!
Yeah, I live in south oregon and gets 100 and up during summer. https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/SPOSN-SSO-Russian-Military-Reversible/dp/B01MXSLL5W&ved=2ahUKEwiF5syWrbjtAhXZJTQIHUijBxEQFjAJegQIEBAB&usg=AOvVaw3IWrmnSdWkDhU_ck-yoYua Made by Sposn which made the originals during the chechen wars.
Small to none. You would have better luck at a local machine gun. Harbor Freight might have one, since they import everything from China, but a for warning they suck. They are cheap on Amazon and Ebay.
Ball bearing, or a roll-pin punch set. My WASR had a mag latch pin that wasn't flared on one side, and started to slide out. Ordered a roll-pin punch set off of Amazon for like $10, and that did the job, along with a sturdy backing and a heavy hammer.
I wouldn't. they make safety glasses out of a certain plastic for a reason. I just picked up a 12 pack of tinted safety glasses on Amazon and wear them as sunglasses, plus they're ANSI certified.
edit to add link.
It’s a Primary Arms 1-4x SFP. I’m not sure what the mounting system is, but it sucks. I traded my friend my CZ82 for this scope and mount, as well as a Mosin Nagant 91/30.
Overall I’d say it does it’s job as a starter LPVO for me. One day I’d like to upgrade to a Primary Arms 1-6x ACSS scope, but that’s a bit pricey. I will say though, if you get this scope for an AK, get a cheek riser for your stock. It’s hard to get a sight picture on a normal stock because AK stocks slant downward. Besides that it’s pretty good.
I linked the Amazon page above but there are a few retailers that sell them or you can get them straight from Grovtec. Didn't know the package came with 2 so I guess I'll have to install one on a friends AKs or wait til I buy another haha. Mine were Full rotation which I'm fine with but you can get half or less.
Saw this sticker a few days ago and HAD to order it. Now I just have to figure out where to put it....
Amazon: https://www.amazon.com/MFX-Design-Russian-Sticker-Background/dp/B07GRFV8KL
I bought mine at a ThinkGeek store but I just checked and Amazon still has them:
Thermo-Tec 13500 12" X 12" Adhesive Backed Heat Barrier https://www.amazon.com/dp/B00029KC2A/ref=cm_sw_r_cp_apa_i_qimNCb7WKMK0H
Cut to fit and place on the inside of the lower handguard. Works like a charm, keeps the lower handguard comfortable.
i got a pair of outdoor research ironsight and they're fantastic. used to use firmgrip from home depot but the slide on my glocks would tear the area around webbing between the thumb and forefinger.
I have to ask....
Why would you need this for: http://www.amazon.com/gp/product/B00EYI95AK?ref_=cm_sw_r_other_awd_ROPdwbBWHQZ4T
This replaces your front iron sight? http://www.amazon.com/gp/product/B002J3LSB6?ref_=cm_sw_r_other_awd_ZQPdwb8V0WWP9
On the dust cover, you'll notice the back of it is flat and angled upward. You'll also notice it's about as wide as a thumb. Press the front of the dust cover into the "lip" on the rear sight block, place your thumb against the flat, back portion of it, and apply a constant forward force to it while lowering the back of it down into position. Your thumb's forward force will keep the recoil spring from popping the cover out of place.
That said, to learn some parts, just Google ones you aren't sure of (not trying to sound rude: this is legitimately how I learned what the parts were, myself). For some further understanding of the rifles, I also tend to suggest translated military manuals. Since your WASR is an AKM variant, I'd recommend this one.
Don't underestimate what you can find on the internet if you dig, either. Besides my translated AKM and AK-74 manual, I have never once opened a book on the AK series of rifles. I just simply spend/spent a lot of time researching stuff on the internet and messaging people more knowledgeable than myself.
Bushnell TRS-25 has been great for me. Small, light, has a 3 MOA red dot with 11 brightness settings. The optic itself feels rock solid, the dials have a really positive click when using them. It's apparently waterproof but I don't Oper8 underwater. 87 bucks to your door on amazon, I have it sitting on top of a UTG side rail and its been rock solid. I can take it off the rifle and put it back on and It holds zero.
Blue Force Gear Padded 2pt is my favorite sling.
Spam can pillow. Technically 54r, but still great. http://www.amazon.com/54r-Spam-Can-Collectable-Pillow/dp/B00LH4VIUO/ref=cm_cr_pr_product_top/181-9099174-1157167
other vendors have them, just google it.
https://www.youtube.com/watch?v=VicBFyLsV70
This is how to do it, a Wheeler punch set makes it easier, this guy is using a hammer(not optimal):
https://www.amazon.com/gp/product/B004SY07HU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
It will come in handy for all kinds of stuff down the road.
Happy shooting!
They make rattle can duracoat. I had it on a Glock when they first started making it and it help up pretty well. It used to be like $49 back then though lol
This cleaning kit Is on amazon and comes with a double sided punch which works great. Plus easily storable in most stocks.
Probably gonna get roasted for it but I used this and it’s held up great so far w/ loctite.
Thinking about switching to a barrel mount tho. It’s better than before, but still could be further forward.
My first AK build, I followed this guide:
https://www.amazon.com/AK-AKM-Rifle-Builders-Manual-Step/dp/1986006565
Their process involves riveting the trunnion into the receiver first, and without rails and center support in the way, it is super easy to then set headspacing using their tooling system to press in the barrel.
I had gotten an 80% without the rails and center support specifically so that I could follow that guide. But when I wanted to build the Romanian and Hungarian kits I got, I could only find clone correct 80%s that already had them installed. In my experience, this makes it a huge pain to press in the barrel (I will not ever use the barrel as a bucking bar for the rivets. Ever.).
I'm curious, how do you press in the barrel when the rails and center support are already installed? I made my own tool that sorta kinda works but not really.
Here’s everything I used
Birchwood Casey Tru-Oil Stock... https://www.amazon.com/dp/B0014VROMQ?ref=ppx_pop_mob_ap_share
TransTint Dyes, Perfect Red https://www.amazon.com/dp/B084YQDGMG?ref=ppx_pop_mob_ap_share
Hit it with some of this, stuff actually works wonders.
I bought some of this a while back for when I have derp moments and ding things down to bare metal and also for use on my 74 when I had to dremel off some stuff for a handguard install, leaving bare metal exposed:
Send it to Jim Fuller. You don't want to mess around too much with these. Changing the grip and stock could easily cause headspace issues, so either send it to a reputable builder or be really, really, really careful and use these: AK47 Go/No-Go Gauge Set
Original russian slings are pretty cheap and look solid on a wood rifle. I really like the mustard color ones. Here is an amazon link, just ditch the leather pad. https://www.amazon.com/Original-Russian-Standard-Rifle-Shoulder/dp/B091P2LLND/ref=sr_1_11?crid=26WY0CXJUDR7W&keywords=russian+ak+sling&qid=1657289748&sprefix=russian+ak+sling%2Caps%2C106&sr=8-11
Indeed it was. This subreddit has a decent enough following - If you're interested, i believe theres some software that can upload automatically from twitter to reddit.
https://ifttt.com/connect/twitter/reddit
either of these might work for you.
As others have said, hear with soldering iron, but more importantly (sorry for being blunt), quit fucking around with cheap tools. That husky set of torx bits are chinese cheese grade garbage.
Buy these along with the allen set and you won't be buying them for a very long time.
Bondhus 31832 Set of 8 Star L-wrenches, Long Length, sizes T6-T25 https://www.amazon.com/dp/B000E7XJR0/ref=cm_sw_r_apan_i_H8H93MC1JYH2JDY3A2DP
Bondhus 20199 Balldriver L-Wrench DoublePK, 10999 1.5-10mm & 10937 0.050-3/8" https://www.amazon.com/dp/B00012Y38W/ref=cm_sw_r_apan_i_9HMHEHH78X70S0VZ4148
Here it is btw if you were interested
Looks clean, it gets front heavy fast though once you start adding flashlights. If u want a good budget light the olight Odin mini is really good. https://www.amazon.com/dp/B08NCGNLYB/ref=cm_sw_r_cp_api_i_4D70YB99J703JVDB7MRZ
SOMA QD Sling, 2 Point QD Paracord Sling with Fast Adjust Loop/ Swivel/ Mounts/ Snap Hook Clips/ Loop end Plate/ Elastic Sleeves https://www.amazon.com/dp/B09NSPDN8G/ref=cm_sw_r_cp_api_i_9N5J5V99P6BF5NFNH0QH
SOMA QD Sling, 2 Point QD Paracord Sling with Fast Adjust Loop/ Swivel/ Mounts/ Snap Hook Clips/ Loop end Plate/ Elastic Sleeves https://www.amazon.com/dp/B09NSPDN8G/ref=cm_sw_r_cp_api_i_9N5J5V99P6BF5NFNH0QH
That’s the sling boys. Amazon special. Comes with multiple types of sling mounting hardware you use. I’ve got it on a solid portion of my guns.
I have had great success with printing AK-12 pistol grips, cheek risers and other fun stuff. Ender 3 run you $199, spring $5 and two glass beds $17.99. Cura slicer and fusion 360 free.
https://www.amazon.com/Creality-Upgraded-3D-Platform-235x235x3mm/dp/B07DS2LZF1/
About ~$60USD. Teslong Borescope:
I bought mine on Amazon, didn’t need it to be super clear/precise just enough to keep an eye on any issues. Plugs into my computer or android phone. You could probably could find an adapter for an iPhone if you wanted.
Thanks! No problem, Uncle Bezos got it for me
Do several light coats, I did a couple of magazines first to test out and it got a little more of a brushed look when you go heavy first coat.
I don’t see this exact pattern anymore but they are hand up gloves. u/klayco47 wears them in his videos and I thought they were cool.
https://www.amazon.com/Handup-Mountain-Bicycle-Downhill-Motocross/dp/B0856WXDDG?th=1&psc=1
Let me tell you something you are a lucky sob I found it under a new link get it quickly not many left that goes for the rest of you!! Russian Tactical Chest Rig Scout D3 https://www.amazon.com/dp/B09TH6V6CR/ref=cm_sw_r_cp_api_i_CMA74WN02Q1P6WJ1J7KG?psc=1
is this what you got this is sweet even in my head the front sight being more visible would be sweet. I'm a bitch with bad eyes tho
Buy a decent allen wrench set.
This is a good one and not super expensive:
Bondhus 20199 Balldriver L-Wrench DoublePK, 10999 1.5-10mm & 10937 0.050-3/8" https://www.amazon.com/dp/B00012Y38W/ref=cm_sw_r_apan_i_H4FPB2H8GZ6VJ2MP3DYT
Heat the screw with a soldering iron to break down any thread locker on the screw.
- Tap on it a little with a punch to see if it will knock loose.
- Drill it out with bit slightly smaller than the wrench (if you are confident with doing that.
- Dremel a slot in the middle of the screw for a big flathead screwdriver. See if SLR will send you a new screw.
- Take it to a smith.
Get nice allen wrenches. These are good : Bondhus 20199 Balldriver L-Wrench DoublePK, 10999 1.5-10mm & 10937 0.050-3/8" https://www.amazon.com/dp/B00012Y38W/ref=cm_sw_r_apan_glt_i_N0MQWFY7VS50V0HH64C2
Dont use the ball end of allen wrenches to do final tightening.
For $23 on Amazon, you can get a pouch that holds three mags.
As a rule, I don't buy gun parts on Amazon, but I will make an exception for molle mag pouches.
It may, it’s an easy swap. If it doesn’t work and you need to go back to stock while your Sandman is in jail, you’ll have to get another pin for your stock piston.
Here is the pin that I used while I waited for KNS to send a replacement head:
Prime-Line 9187793 Slotted Spring Pins, 1/8 in. X 3/4 in, Plain Steel, 25-Pack https://www.amazon.com/dp/B07DS7HN4J/ref=cm_sw_r_cp_api_glt_i_2HPWSSENANCBVXCBGNWE?_encoding=UTF8&psc=1
There’s a few different options that you can put between the pistol grip and the receiver? Idk how it would work for you but here’s the link grip sling thing
https://www.amazon.com/gp/product/B002E6USZK/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
American Defense AD-RECON 30 STD Riflescope Optic Mount, Black
Got the whole setup on amazon.
EXCELLENT ELITE SPANKER Open-Top Single/Double/Triple Mag Pouch for M4 M14 M16 AK AR Elastic Kangaroo Rifle Magazines and Pistol Mag Pouch https://www.amazon.com/dp/B07VV3D5FT/ref=cm_sw_r_cp_api_glt_i_4R3M2APEHD71X3S42EAG
Would that be good for the plate carrier? And I’ll get those for my belt
Are you talking about the bigger loop with the qd slot? I have that one on my m70 but I tried this one with no success. I was trying to find something taut and tidy.
I got that same side folder on my airsoft gun…Evike Kalashnikov Fully Licensed 60th Anniversary Edition Full Metal AK47 Tactical Airsoft AEG by CYMA https://www.amazon.com/dp/B07WSG83CM/ref=cm_sw_r_cp_api_glt_i_QG3RSKKFPXR70RE9XNYD
Go big Wheel Bearing Grease Red And Tacky Automotive Lubricant Tub Jar | Car Grease | Axle | Thick MultiPurpose Red Grease | Rod | High Temp | Tractor | Lithium | Trailer Hitch | 5th Wheel | HeavyDuty 1 LB https://www.amazon.com/dp/B09NL7V11R/ref=cm_sw_r_cp_api_glt_i_7GADSXQ4QRSK5Z9MPFWQ
So I scuffed the wood with 220 grit, then 320 grit, then #0000 wool.
Stained it with a walnut stain. (Multiple sessions)
Went over with #0000 to get finish evenly.
Went over with tru oil.
What I used: https://www.amazon.com/dp/B0014VROMQ/ref=cm_sw_r_cp_api_glt_i_AC5P701W6TFFGV75AJ52?_encoding=UTF8&psc=1
Good guide: https://youtu.be/PaCBHb0wDls
Nah, just use a CC. Privacy.com is a third party that is storing your checking account details. If/when they have a breach, you'll be in an even worse position. Any worthwhile CC has fraud protection built into it at no charge. Most automatic payment on CCs is automatically migrated upon issue of new plastic.
I've got four of them and none have any rust.....if you are going to have it sitting in a closet look into getting a https://www.amazon.com/Allen-Company-Shotguns-Anti-Rust-Drawstring/dp/B01MG29K89 I've had rifles sitting under my bed in GA and KY for years without any rust issues while going to college.
Best I can do, i think the original pk-a is too old for picatinny/weaver
PK-AS Dual Red & Black Dot for Weaver / Picatinny. Russian Rifle Scope Collimator Sight https://www.amazon.com/dp/B094BNZZDT/ref=cm_sw_r_apan_glt_fabc_ENRPMDQM9ACABBJGDD7J
I use this. DULCE DOM 32/36/42 inch Double Rifle Case Soft Bag Gun Case, Perfect for Rifle Pistol Firearm Storage and Transportation, All Around Shooting Range Tactical Rifle Backpack, Indoor Outdoor https://www.amazon.com/dp/B08PTZCXBJ/ref=cm_sw_r_cp_api_glt_fabc_1BSRP3GS4HGFYYXWRH3H?_encoding=UTF8&psc=1
People- do not use privacy.com. They store your checking account information and do not provide fraud guarantees that any worthwhile CC will. If/when they have a breach, your checking account number will be compromised. Most CC companies will let you generate one time use card numbers anyways, WITHOUT risking your checking account.
Dang, I thought I was an outlier. I had one a few months back, thankfully I used privacy.com. I notified the owner as soon as it happened and he replied within the day saying they weren't aware of anything. Ordered again since on a new privacy card and no fraud there yet.
ETA: after reading some comments here, I will say that while I don't know anyone that works there personally, I would never suspect that the site owners are complicit. I have had many great interactions with them and they don't seem to be up to anything sketchy. When I emailed them about the transactions I noticed, Lonnie replied saying they never saw anything but the last four numbers of a card unless you made an order over the phone.
BOOSTEADY 2 Point Rifle Sling with HK Style Clips, Adjustable 550 Paracord Rated Nylon Gun Strap for Rifle https://www.amazon.com/dp/B08BX19F7T/ref=cm_sw_r_apan_glt_fabc_Q8P452C4ZNJP7J2H7876?_encoding=UTF8&psc=1
If you want to wrap the stock in paracord, this one matches the wood pretty well. It makes it a bit more comfortable on the cheek and looks pretty cool, imo.
TOUGH-GRID 750lb Paracord / Parachute Cord - Genuine Mil Spec Type IV 750lb Paracord Used by The US Military (MIl-C-5040-H) - 100% Nylon https://www.amazon.com/dp/B00CJICDXI/ref=cm_sw_r_cp_api_glt_fabc_AZ87H3TXPMWZSH2G8WKJ?_encoding=UTF8&psc=1
I had a hella time removing the screw on the rear trunnion on my VZ-58. Searched google, and a gunsmith recommended an impact driver. It was so easy using the right tool! This will work, period.
Klein Tools 70220 Impact Driver, Reversible Driver Set Includes 3/8-Inch Square Drive Adapter and Four Hex Bits https://www.amazon.com/dp/B000936R6E/ref=cm_sw_r_cp_api_glt_fabc_S4QKVMN0P5XKDBZVP8FT?_encoding=UTF8&psc=1
Definitely need the Allen Head socket on a ratchet, the set below will take care of this job and just about anything else you will ever encounter, with relative ease.
LEXIVON Master HEX Bit Socket Set, Premium S2 Alloy Steel | Complete 32-Piece, SAE and Metric Set | Enhanced Storage Case (LX-144)
https://www.amazon.com/dp/B07MDLCLML?psc=1&ref=ppx_yo2_dt_b_product_details
Birchwood Casey
Birchwood Casey 14130 Plum Brown Barrel Finish, 5-Ounce https://www.amazon.com/dp/B0000C5153/ref=cm_sw_r_apan_glt_fabc_1B2R8F5JWEJSZBBKKH8D
If you apply just this it will almost look like it's rusted. You need the bluing compound too.
BESTSCOPE Mini red dot reflex sight riflescope
Plus it’s only $18.99
Jnrtifow Sling Mount Adapter Attachment 2PCS for Picatinny Weaver Rail https://www.amazon.com/dp/B08CRC426X/ref=cm_sw_r_apan_glt_fabc_G1WCA9KZVSZXJ9GT6V2J?_encoding=UTF8&psc=1
Link to the mount
Jnrtifow Sling Mount Adapter Attachment 2PCS for Picatinny Weaver Rail https://www.amazon.com/dp/B08CRC426X/ref=cm_sw_r_apan_glt_fabc_58QB128R9XTEEY2EJQSB?_encoding=UTF8&psc=1
That's the adapter I used, you have to move the brace all the way up on the pic rail, then you gotta remove about 1/4 inch of material off the top of the bar that the sling attaches to so the hk style sling can attach and move freely, I used a vice and grinder, it was alot easier than it sounds but I like the look and it was the only option I could find to keep the brace and get a sling on it that wouldn't interfere with operation. If you decide to go this route I can send you more detailed pictures
Found it
Funny Army Garden Gnome Statue with AK47, Resin Desktop Ornament, Combat Gnome Enthusiasts, Gun Lovers, Military Gnomes Garden Decoration Figurines Outdoor Clearance Yard Halloween Decor https://www.amazon.com/dp/B097BD4465/ref=cm_sw_r_apan_glt_fabc_NVY8MNH4Z4P47XWJMCR3?psc=1