What are /r/shroomers' favorite Products & Services?

From 3.5 billion Reddit comments

Check out the PF-Tek method. I can't link it b/c I'm at work... but you should google and do a lot of research. Watch a bunch of Youtube tutorials. PF-Tek is the easiest and most reliable (IMO) for a first time grower. If you are interested in supplies, you basically need:

For the substrate:

• 8 oz. wide mouth mason jars
• vermiculite (you want fine ground... closer resembling sand as apposed to small rocks)
• brown rice flour
• Foil
• Spore syringes (you can PM /u/seekknowledge and he will hook you up)
• Pressure cooker or pot/steamer combo with a lid

For your fruiting chamber:

• Sterilite container (can be found at home depot)
• perlite (found in the gardening section at home depot)

Other:

• Rubbing alcohol (sterilization)
• Rubber gloves (for inoculation)
• A drill to drill holes into you fruiting chamber to provide fresh air exchange (FAE)
• Food dehydrator for when your little buddies are picked and need to be dried.

And that's about it. There are some luxury items you could also buy like a fan for further providing FAE, or even an air pump to pump fresh air into the container.

I would recommend buying your own items separately. When you buy a whole kit, you are paying for a lot of stuff you may not need and all the supplies are easily available on Amazon or at Home Depot/Lowes.

I'm sure I'm leaving some stuff out, but that will get you started. Just one piece of advice... research, research, research. This isn't a quick turn-around project. It takes months from inoculation until you have dried product. If you skip steps, you may have wasted quite a bit of time.

PM me if you have questions. I'm also somewhat a noob but I've had some successful grows.

dont. soot can be a contam.

invest in a lamp. you might cry after realizing youve been missing it.

If something that looks like that occurs right next to some promising looking mycelium there's away around the problem. For one thing the mycelium can grow into large colonies and you can do a transfer from a leading edge away from the contaminants.

Also, there is this. Cut a slab of agar out of a clean plate and cover the mycelium and contams entirely with it. The mycelium can tunnel through and can easily emerge on top, sweet and clean. The bacteria or yeast will remain trapped beneath. Source: Paul Stamets

I've seen the pic a million times had no idea rr was behind it! What you said reminds me of this one though: https://thenextweb.com/shareables/2015/11/06/psa-if-you-dont-want-to-grow-shrooms-in-your-gpu-you-should-probably-clean-your-computer/

Everytime it's posted people eat it the fuck up and think it happened like that naturally. Lmao.

The best resource I've found:

https://www.shroomery.org/forums/showflat.php?Cat=&Board=83&Number=24420178&fpart=&PHPSESSID=

This is also a pretty good book for an overview:

https://www.amazon.com/dp/0992558409/ref=cm_sw_r_cp_apa_glt_fabc_76TFH5DFNS1TAK7QSJR0?_encoding=UTF8&psc=1

It's a little more up to date than the Psilocybin Bible. Bulk substrate is the way to get good results.

Good luck!

I mean, I guess there are books out there on it, but I haven't read any. Apart from that tip where you need to know a bit about mushroom lifecycle to understand, I guess the rest is common sense really. Knowing that the mushroom is 90% water and so needs water to grow helps my brain work, and visually seeing if it is dry and misting as needed etc.

https://mycotek.org/index.php?threads/1537/

Brought me years of success.

https://www.amazon.com/Zoo-Med-Eco-Earth-Pack/dp/B0010OSIHW

Or if you buy a big brick of coir, the bricks used here have an average mass of 600g.

You can check my older posts about modified monos.

I bought 2 sets of these. The circle shaped one with the double mushroom is the biggest one. You can probably fit ar least a gram in there. I can fit 3.5g into about 10 of the Mario ones. The other molds with the 3 mushrooms are pretty tiny and I don't use them much since they aren't uniform sizes and I can't be certain how much psilocybin is in them.

mushroom molds

$70 for the controllers and $50 fogger. Probably cheaper at a store.

https://www.amazon.com/dp/B01N56KEU6/ref=cm_sw_r_cp_apa_glt_fabc_TSEG685TAMDB7KDDAJ15?_encoding=UTF8&psc=1

https://www.amazon.com/dp/B07VVNP7F3/ref=cm_sw_r_cp_apa_glt_fabc_1T3SNP578FE6Y4A6ASFG?_encoding=UTF8&psc=1

Mist as needed. Generally 3x's a day work but if you're in a dryer/humid environment, it will vary. This is where your gonna have to learn by sight what things should look like and feel like.

The cakes should glisten with light moistness but not be wet. The perlite should be pretty damp. Fanning is important and I recommend a good fan (this has worked for me from my first SGFC to my recent 6 and 1/2 ft tent: https://www.amazon.com/dp/B01FJSJ2QK/ref=cm_sw_r_cp_apa_glt_fabc_521EXQYNEBB06W20C2NE?_encoding=UTF8&psc=1)

Be consistent, be patient.

It’s a 5x10 I’m not sure how much or where to get it, I run a grow in my city and people just send stuff to me to promote it and this one was in one of the packages. It doesn’t have any tags or id tell you the company sorry.

Edit: might have found it. https://www.amazon.com/iPower-Hydroponic-Observation-Window-Growing/dp/B06ZZFFHMJ

homEdge Break-Apart Chocolate Molds, Set of 4 Packs Food Grade Non-Stick Silicone Protein and Energy Bar Molds https://www.amazon.com/dp/B07DQPNZ3K/ref=cm_sw_r_cp_api_glc_fabc_r4FaGb4NS02C3?_encoding=UTF8&psc=1

https://www.amazon.com/gp/product/B07QZ34SMV/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

I ended up with 4 of these trays filled. I want to be able to adjust the amount in small increments.

If you don't want to go the whole DIY route (which is always the best plan but I digress) you'd be MUCH better off buying a pre-made, pre-pasteurized "grow bag" type kit. Buy a spore syringe and inject them yourself. Let it colonize and the fruit it. It doesn't get more simple. You're basically risking getting your stuff confiscated at customs or getting ripped off or maybe even jail just to save yourself the trouble of squirting spores into a bag.

Multiple grow bags and jars on Amazon. https://www.amazon.com/All-One-Mushroom-Grow-Bag/dp/B00NHYUMQ8

Spores. https://www.mushrooms.com/

There is a way around bacterial contamination. Cut a slab of agar out of a clean plate and cover that entirely with it. The mycelium can tunnel through and can easily emerge on top, sweet and clean. The bacteria or yeast will remain trapped beneath. Source: Paul Stamets

Capsule Connection Separated Empty Gelatin Capsules, 00 Size (1000) Resealable Bag https://www.amazon.com/dp/B0050PHIRI/ref=cm_sw_r_cp_api_i_wM1dFbTKFT1N7

Trust me...get the already separated capsules. Saves loads of time and effort

Wow thanks. Didn’t think I’d get so much response to my decor, but it’s definitely made my day! 🌞 I bought the steampunk clock on Amazon. It came in a weird color so I painted the numbers with black acrylic paint and colored the gears and outline parts with the metallic sharpies in silver, copper, and gold. original clock $26 and metallic sharpies $4

Paul Stamets covers the subject quite well.

found them, they come in a set

45 Pcs 5 Gram Silica Gel Packs, Transparent Desiccant, Desiccant Packets for Storage, Moisture Packs for Spices Jewelry Shoes Boxes Electronics Storage, Food Safe https://www.amazon.com/dp/B08YJH2J6Q/ref=cm_sw_r_cp_api_i_VMSFVYJTWBV7SC87YZMC

Not going to work like you think. The packets to keep products dry is on Amazon. 45 Pcs 5 Gram Silica Gel Packs, Transparent Desiccant, Desiccant Packets for Storage, Moisture Packs for Spices Jewelry Shoes Boxes Electronics Storage, Food Safe https://www.amazon.com/dp/B08YJH2J6Q/ref=cm_sw_r_cp_api_i_VMSFVYJTWBV7SC87YZMC

I hope someone familiar with cints can answer that one. Here's a comparison between the two species.

In the meantime, google (and the shroomery) is your friend:

>The mature gills on foes will be brown with spores and the stems are usually lighter colored with no hairs and watery (if that makes any sense). Although a lot of Subbs have light colored stems as well but they will be a different texture. Usually Subbs have twisting fibers spiraling up and around the stem and fine hairs.

>The best thing I can say is to collect a lot of specimens and print them all. Then you will begin to see the subtle and not so subtle differences.

It kept fruiting every-time momma nature played the right tune right up until winter frosts, the full outdoor setup is covered in the video I've added in the link here making outdoor cubensis beds

Thanks mate especially for the healing energy for the back, I have good and bad days but I'm always in the fight.

So glad that i set up the Odysee channel before Youtube shut me down, it already has way better content on than my youtube ever did, simply down to youtube forcing me to delete the best stuff first and it never all being up there together at any one time, so everything that was ever on my YT is on the Odysee, plus all the stuff Youtube deleted, plus all the stuff I didn't even bother trying to squeeze past the marching hammers of doom at Youtube 🤪🤣 Chronicles of Bod Lives on, uncensored and commercial free

Vacuum sealing it's usually done plastic bags.

Most people just put dried shrooms in a sealed jar with a desiccant, good for months.

Vacuum sealing equipment is pretty simple https://www.amazon.com/Machine-STYFSCP-Automatic-Indicator-Preservation/dp/B0922VX1NV/ref=mp_s_a_1_4?dchild=1&keywords=vacuum+sealer&qid=1624919512&sr=8-4

I got these from Amazon! I just cut the foils in half to wrap 2 bars!

BESTONZON 200pcs Metallic Foil Paper Sheet Gift Package Wrapping Paper for Packaging Chocolate Candy https://www.amazon.com/dp/B07D8JYQ9H/ref=cm_sw_r_cp_api_glt_fabc_JXWKTPQ8CMPW6NWPAHD6?_encoding=UTF8&psc=1

Magic Mushrooms Sticker for Scrapbooking, Calendars, Arts, Kids DIY Crafts, Album, Bullet Journals 50 Pack https://www.amazon.com/dp/B07P37MM5H/ref=cm_sw_r_cp_api_glt_fabc_48KNEQ4DF06HDA8KHGBM

https://www.amazon.com/ALORAIR-Sterilization-Filtration-Professional-Restoration/dp/B08933VR5Z

This is the link for the air scrubber I’m currently using. Please note I use this scrubber to supply BOTH of my 8x4x6.5 sized Martha tents with fresh air/humidity. For a tent this small it would be over kill 😅 I only ended up with mine because of a close friend who owns a mold business. If you plan on staying small I’d find a fan similar to what you currently have with a high cfm. Just not 6500 like the one above 😅😅😅

I’ve used little plastic condiment containers with great success. Why do you want to sterilize the petri’s? Just use new ones each time. Open the package in a SAB, they are sterile(or close) in the bag already.

Poured probably 100 of these, never had a problem.

[100 Sets - 2 oz.] Plastic Portion Cups With Lids, Souffle Cups, Jello Shot Cups https://www.amazon.com/dp/B01N7W9BUX/ref=cm_sw_r_cp_api_glt_fabc_FT545CVWNV667RZRSQY9?_encoding=UTF8&psc=1

That's really nice, it'll work fine.

I'm using something like this with a 3 disc atomizer from house of Hydro for humidifier:

https://www.amazon.com/dp/B01D7GHEES/ref=cm_sw_r_cp_apa_glt_fabc_6DC4EV9Z1KP1JGYK4F32?_encoding=UTF8&psc=1

KATA 11PCS Hole Saw Kit 3/4"-2-1/2" (19-64mm) Hole Saw Set with Mandrels https://smile.amazon.com/dp/B07ZXDJDW9/ref=cm_sw_r_cp_api_glt_fabc_FKRW5YJBTWSV5HHNDJ06 3M Micropore Tape https://smile.amazon.com/dp/B06XNP8J4R/ref=cm_sw_r_cp_api_glt_fabc_TAYDMET8YTN77WP06EWE?_encoding=UTF8&psc=1

What sort of air filter do you have in there? Speaking of which this is a great deal right now https://www.amazon.com/gp/product/B08GS324VG/ and can easily turn the air in a room like that in a few minutes.

1. Is it too early to shake if it's stalling? If its stalling no, If it doesnt bounce back it has another issue and toss it.
2. What to do if 2-3 weeks go by and the jar isn't 30% colonized? Sometimes certain genetics take longer, but it could be an issue with your moisture content or how they were preped.
3. These jars don't have a GE hole, might this have any effect? Yes, gas exchange is necessary. To high of a co2 environment will slow growth. So a flipped lid(gasket side up), micropore taped or polyfil stuffed hole all work well. I use precut filters that have adhesive already on them, I just hole punch the lids and slap one on. Linked em below. Not necessary but they look clean and are very convenient. https://www.amazon.com/dp/B07WHFXJFV?ref=ppx_pop_mob_ap_share

It works. But watch out for filter..id invest https://www.amazon.com/dp/B07FJTZSVL/ref=cm_sw_r_cp_apa_fabc_0T8RR5JA44ZW9J6ZMPKG?_encoding=UTF8&psc=1

And https://www.amazon.com/dp/B08RS6QRK8/ref=cm_sw_r_cp_apa_fabc_J8TM5CWTYR3QJ6JX8WTH?_encoding=UTF8&psc=1

bags are here

I think once they are dehydrated you want to keep them as dry as possible, those ones are to maintain a humidity level. Find some silica dessicant and use them. This is what I bought based on someone in one of these subs recommendations. Just tape to the inside of the lid when you put the dried fruits in the jar.

https://www.amazon.com/dp/B00DYKTS9C/ref=cm_sw_r_cp_apa_fabc_1zjbGbQGGEPF1?_encoding=UTF8&psc=1

On amazon. Heres great starter one and temp controller. https://www.amazon.com/dp/B08C2PXMNC/ref=cm_sw_r_cp_apa_fabc_PgGaGbD1E1Q2T?_encoding=UTF8&psc=1 https://www.amazon.com/dp/B08NPR7BWP/ref=cm_sw_r_cp_apa_fabc_GhGaGb4W6M306?_encoding=UTF8&psc=1

I use cheap fan controlled humidifier and tiny 200w heater during winter. Works great. Tent allows great humidity control. Dont even need tops on bins.

Dude this fogger could run probably three Martha’s at once. It only has to kick on for a few seconds to get the Rh all the way up to 99 it’s gonna run you about $50 but imo it is worth it. Here is a link https://www.amazon.com/Coospider-Terrariums-Humidifier-Paludarium-Amphibians/dp/B07VVNP7F3/ref=asc_df_B07VVNP7F3/?tag=hyprod-20&linkCode=df0&hvadid=385180922523&hvpos=&hvnetw=g&hvrand=13225456730892667585&hvpone=&hvptwo...

This one has served me really well so far, I have used it lots. I believe willy myco recommended it, it's cheap and does the trick. Only thing is it will rusty if not properly dried when done with it. I also left water in mine with jar rings over night an it had rust spots in the morning. All human error. I'd buy it again.

Also if you think you are going to like this hobby get this bigger one or one I shared. You can always fill it half full, but if you buy a smaller one you might find yourself doing your jars/bags in batches. Mush love homie.

https://www.amazon.ca/dp/B000RNH7PQ/ref=cm_sw_r_cp_apa_fabc_L7gSFbPTCFHXW?_encoding=UTF8&psc=1

If you have the money, Excalibur dehydrators are incredibly nice. Otherwise, the nesco dehydrators like this one work great. Make sure you go through Amazon or someone who will handle warranty issues for you, though.

How much did you plan on paying for a dehydrator? I would HIGHLY recommend you purchase a dehydrator and avoid freezing your product. This is the dehydrator I got. I bought this one used for 36 dollars off of amazon, and it has been absolutely fantastic.

I would definitely recommend picking that bad boy up and picking up a pack of good desiccants like the ones I bought here. Some people say you can use cat litter, I tried and didn't really see it working well. You'll notice very quickly that even when they are cracker dry, if you store them in a plastic bag for a day or two they absorb moisture and start becoming soft.

Don't skimp out on this stage of the process.

This one is scalable, so it'll work for your 20 gallon tank up to 100. If you go with a different one, make sure it comes with tubing.

https://www.amazon.com/dp/B01EBXI7PG/ref=cm_sw_r_cp_apa_i_OQYqFb8NE75SF

https://www.amazon.com/gp/product/B07VSVRNFH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 my friendo. Or you can shell out for the Anova precision chamber vacuum sealer if you want to do some sous vide as well.

Has anyone tried the 10-inch long tweezers/scissors that people use for trimming aquatic plants in tanks?

https://www.amazon.com/AAProTools-Aquarium-Scissors-Stainless-Instruments/dp/B084JP1MZZ/ref=asc_df_B084JP1MZZ/?tag=hyprod-20&linkCode=df0&hvadid=416695019034&hvpos=&hvnetw=g&hvrand=10531860302016781006&hvpone=&hvptwo=&a...

Just use one of these. This is the model I've used and there was virtually no smell outside the tent.

Yes, it saves you from the hassle of preparing. You can just order pre-made agar plates online.

https://www.amazon.com/Magic-Mill-Dehydrator-Machine-MFD-500/dp/B08M4FD4WR/ref=mp_s_a_1_3?c=ts&keywords=Dehydrators&qid=1668774424&s=kitchen&sr=1-3&ts_id=1090752

Dehydrators start at around $40. Sometimes you can find them at goodwill or other thrift stores. It doesn't really matter which one you get.

Gotta pay respects to someone else on here that directed me to this sprayer. I think it actually made a big difference. It’s a way finer mist than what I was originally using, almost like creating an artificial fog of himidity.

https://www.amazon.com/Beautify-Beauties-Flairosol-Empty-Bottle/dp/B07N7RLM7V?pd_rd_w=ap623&content-id=amzn1.sym.06bb3028-2b73-4281-a97e-9a56936e1b90&pf_rd_p=06bb3028-2b73-4281-a97e-9a56936e1b90&pf_rd_r=7TZZ0QKJ96R4QM1WM770&pd_rd_w...

https://www.amazon.com/X-Acto-XZ3601-X-ACTO-Knife-Safety/dp/B005KRSWM6/ref=mp_s_a_1_3?keywords=exacto+knife&qid=1664759296&qu=eyJxc2MiOiI0Ljk1IiwicXNhIjoiNC43MyIsInFzcCI6IjQuNzAifQ%3D%3D&sr=8-3

One of these bad boys and a couple extra blades

I built my own laminar flow hood.

Using:

Lennox X6675 20x25x5 Healthy... https://www.amazon.com/dp/B09YMF4R6J?ref=ppx_pop_mob_ap_share

REKO Lighting R2000 Air Purifier... https://www.amazon.com/dp/B078MMJZ74?ref=ppx_pop_mob_ap_share

No worries. It’s pretty rare for me to actually notice follow up questions because my message flag is stuck permanently on but I don’t mind them when I see them.

I use these heat mats which come with their own probe that they use to turn themselves on and off to maintain whatever temp you set: VIVOHOME 10 Inch x 20.75 Inch... https://www.amazon.com/dp/B07J56XYN6?ref=ppx_pop_mob_ap_share

But if you don’t want to invest in something new a regular old thermometer would work fine for you to confirm you’re hitting the right temperature range. I got a set of four small digital thermometers that also tell you the humidity, something like that would be good.

This works like a champ... https://www.amazon.com/VIVOSUN-Seedling-Digital-Thermostat-Standard/dp/B016MKY7C8/ref=sr\_1\_2?crid=1BQ7UNGKR02YQ&keywords=seedling+pad+with+thermostat&qid=1662239267&sprefix=seeding+pad+with+thermostat%2Caps%2C135&sr=8-2

It worked for a while. Paul Stamets has his bootleg online books deleted when they get discovered. His latest edition of that book is available to purchase here

https://www.amazon.com/Host-Defense-Cultivator-Practical-Mushrooms/dp/B00A2RRSHE/ref=sr\_1\_2\_sspa?gclid=Cj0KCQjwjIKYBhC6ARIsAGEds-LhbFtYt1wNHtEuXCnEQXmuLPEshql58jBeKBfxiMUZ1RK3eHabnN4aAva3EALw\_wcB&hvadid=241619348391&hvdev=c&hvlocph...

https://www.amazon.com/Insulated-shopping-reusable-Collapsible-instacart/dp/B08JD4B6F1/ref=mp_s_a_1_1_sspa?crid=IKS6T1RIMW56&keywords=food+delivery+bag&qid=1660960735&sprefix=food+del%2Caps%2C830&sr=8-1-spons&psc=1

https://www.amazon.com/VIVOSUN-Upgrade-Reptile-Digital-Thermostat/dp/B0823MGXXD/ref=mp_s_a_1_16?crid=2I0LOYZ71HPAP&keywords=heat+mat+for+reptiles&qid=1660960789&sprefix=heat+mat+%2Caps%2C308&sr=8-16

These will get you through the winter friend. I just started my first PE grow, super excited😎 Also look into agar stuff on 30 sec on YouTube. I just spawned my first agar transfer, and first tissue to grain transfer. It's a lot of fun this hobby.

Go to amazon. https://www.amazon.com/Professional-Grade-Vermiculite-Plantation-Products/dp/B001693Y3Y/ref=mp_s_a_1_4?crid=100GZKPN2F8O9&keywords=vermiculite&qid=1660040897&sprefix=vermi%2Caps%2C242&sr=8-4

Happy to help! This method will surely work for you

these are the bags

Is this one fine, bro?

fruit

Add agar and liquid culture to your workflow. Use agar to clean up contamination from spores or a sample from your last grow, and then to select the quickest growing mycelium. Make a LC from an agar sample for quick inoculation, and longtime fridge storage (though there are better ways for storage, I'm still using LC I made a year ago).

Read a book, the psilocybin mushroom bible is pretty comprehensive.

sample size of one but I bought the exact same unit and it died in two months.

I recommend just cutting some screen material to fit your current trays.

Look up philly golden teacher broke boy tek, it's a video series detailing start to end of the process.

You can skip to the "spawn to bulk" stage, where he makes coco coir and puts the whole concoction into a shoe box.

It's what's called a "shoe box tek"

Been a minute but if IIRC, I used this:

https://www.amazon.com/Sterilite-Quart-Basic-Clear-Storage/dp/B00M0I1QP8/ref=mp_s_a_1_16?crid=21EJROD4Q1IHH&keywords=shoe+box+12+qt+sterilite+storage+bins+with+lids&qid=1656971703&sprefix=shoe+box+12+q+sterilite+storage+bins+with+lids%...

word dude 💛.. I just found these that someone recommended in another thread awhile back and they look PERFECT! probably going to get the 4oz and 2oz ones ..

Of course not. Get your self a fine mister. Hold it high above the substrate and let water gently land on the surface. Read threw the link i posted about surface conditions.

I just bought this and its great for misting the surface

fine mist sprat bottle

If you find cheaper and same quality as this one let me know. But this is the one I highly recommend 👍

QUALITY VERMICULITE FOR SEED... https://www.amazon.com/dp/B071GBPGNB?ref=ppx_pop_mob_ap_share

I'm not a huge fan of Amazon but here's what I've been using for awhile now. They are pricey but definitely worth it IMO.

Mr. Coffee

This is what I use, dedicated to mushies.

As for the dust, it wouldn't be anymore potent.

I mean if your coffee grinder is getting your mushies ground up to a fine powder then you’re good. If not, I would definitely recommend a spice grinder. I just checked Amazon, and the one I use $24. https://www.amazon.com/KNIGHT-Grinder-capacity-Electric-Catcher/dp/B093K75YX1/ref=mp_s_a_1_4?crid=1VV820DKOQPAH&keywords=spice+grinder&qid=1654882967&sprefix=spice+grinder%2Caps%2C165&sr=8-4

The tub walls tell me it's dry. But I'd honestly buy a humidity gage. $15 for a 6 pack TASOGEN 6 Pack Mini Digital Thermometer Hygrometer,Indoor Temperature and Humidity Gauge Meter Monitor Fahrenheit (℉) for Humidor,Greenhouse,Reptile Tank,Home,Jars https://www.amazon.com/dp/B08P3QJJZL/ref=cm_sw_r_apan_i_5FB9RG6QDW7EX2QF1E6E?_encoding=UTF8&psc=1

Dude. I'm using the same container and it's awesome. You have total control of humidity and air flow. I have mine on a fogger with a humidity sensor and I only need to dehumidify the thing. Put a fan on it! Set it for 82.5 and you're air hovers between 90-78% humidity! It gets fresh air every 7-10 minutes.

Thanks!

Ya I never modify the tubs, just flip the lid upside down for FAE, along with some fanning.

No top layer needed!

Here’s what I’ve used:

Spawn

Bulk Sub

You can. But you still need to fidget with replacing the blade. With these, I open, use, then set aside. Clean, repack, re-PC. Ready for the next round every time I make new plates .I use 4oz mason jars.

You can get really cheap ones on Amazon for $50. I use this one and it’s great

https://www.amazon.com/dp/B0828613J4/ref=cm_sw_r_cp_api_i_dl_VQ14QY56PVX5E24P1NRQ?_encoding=UTF8&psc=1

✌️👽☮️🍄❤️

Thanks for the advice! Would you say that something like this would be sufficient? https://www.amazon.com/Pasteurized-Mushroom-Substrate-Manure-Vermiculite/dp/B08HYF8X7Q

This is my first grow so I dont really have many good sources down yet for materials

I used hot water bottle and changed the water every 10 hours and it worked.

This :https://www.amazon.com/BYXAS-Cover-2-0L-Odorless-Superior-Material/dp/B08MYWC6M7/ref=sr_1_19?crid=2HG9VIC9RACNH&keywords=hot%2Bwater%2Bbag&qid=1652100200&sprefix=hot%2Bwater%2Bbag%2Caps%2C223&sr=8-19&th=1

Mix a 1/4 cup of mosquito bits in a gallon of water at room temp. Let them sit for half an hour and strain out the bits, then use that water to mist your tubs. Works great for me but will take a few days to take effect.

They're fungus gnats. Get some bright yellow sticky traps they sell for potted plants. The adults get trapped and no more eggs get laid and they are eradicated. In the future put the traps on the substrate from day one, don't wait until you see them.

I've used traps like these before, they poke a small hole in the substrate and the trap is right near the surface which is perfect.

https://www.amazon.com/Houseplant-Sticky-Stakes-Outdoor-Insects/dp/B08BDKHSRJ/ref=sr\_1\_25?crid=3DYHEYI0LL0GT&keywords=yellow+insect+traps&qid=1651442261&sprefix=yellow+insect+traps%2Caps%2C142&sr=8-25

Yeah, this variety pops toooons of little ones (if it’s KS or KSSS) I’ve found these tweezers to be the best for collecting little ones

Honestly I'm not sure it's this grow bag MushroomSupplies.com All in ONE Mushroom Grow Kit in-a-Bag (3 LBS) | Mushroom Grow Bag with Sterilized Grain and Substrate | Easy Grow Your Own Mushrooms https://www.amazon.com/dp/B09MZRJGR7/ref=cm_sw_r_apan_i_MSK8P5FRTEVJRJ1NBB92?_encoding=UTF8&psc=1

Msfullsea Vertical Laminar Flow Hood Air Flow Clean Bench Workstation Vertical Laminar Dust Free Room Worktable for Phone LCD Repair Only 1 HEPA Filter (Air Flow Hood) https://www.amazon.com/dp/B095WH7MB1/ref=cm_sw_r_cp_api_i_BGGWR4RNCXSBSKR3X80D

EatingBiting（R）20ml Reusable Stainless Steel Hypodermic Veterinary Animal Syringe Glass for Lab/Quality Stainless Steel/Simple Structure/with Locking Screws Simple Operation https://www.amazon.co.uk/dp/B073ZBNY2Q/ref=cm_sw_r_cp_api_i_YSQ5T8V0622YTTYHM7QS?_encoding=UTF8&psc=1

EatingBiting（R）20ml Reusable Stainless Steel Hypodermic Veterinary Animal Syringe Glass for Lab/Quality Stainless Steel/Simple Structure/with Locking Screws Simple Operation https://www.amazon.co.uk/dp/B073ZBNY2Q/ref=cm_sw_r_cp_api_i_YSQ5T8V0622YTTYHM7QS?_encoding=UTF8&psc=1

Presto 06300 Dehydro Electric Food Dehydrator https://www.amazon.com/dp/B082M63JF1/ref=cm_sw_r_cp_api_i_5EF7VZAV30J519C8ANY3 Bought this one about a year ago and works pretty good…6-8 hours and fruits are perfectly crispy!!

This is the I’ve got. Worth noting if overtime you feel like it’s not working as well, You might have Verm in the fan part so just dump it out and keep the bottom clear and you’ll be good

Limited-time deal: OSTBA Food Dehydrator, Dehydrator for Food and Jerky, Fruits, Herbs, Veggies, Temperature Control Electric Food Dryer Machine, 5 BPA-Free Trays Dishwasher Safe, 240W, Recipe Book Included https://www.amazon.com/dp/B0828613J4/ref=cm_sw_r_cp_api_i_dl_4ZNX0CBDNAAWV9TR4GXH?_encoding=UTF8&psc=1

XPRS Nutra Size 1 Empty Capsules - Empty Vegan Capsules - Capsules Express Vegetarian Empty Pill Capsules- DIY Vegetable Capsule Filling- Veggie Pill Capsules Empty Caps (100 Count, Clear) https://www.amazon.com/dp/B07X5N6W42/ref=cm_sw_r_awdo_545YV2R6KHA8XBC06M4M

I hate to be that guy but this isn't an effective flow hood.

What you built is basically your own filter fan and that's it. That isn't the right kind of filter and the fans you bought don't have enough power to drive laminar flow hood.

Schematics for these types of industrial tool usually specify ~50-100 cfm per square foot of filter. The pressure differential needed to drive the HEPA filter at it's rated flow will be stamped on the side in 'inches of water'. My 12"x12" H13 HEPA filter requires 3" necessitating a forced air blower fan like this

No, you want something like this and you might be able to get it at a beauty store.

https://www.amazon.com/Beautify-Beauties-Flairosol-Empty-Bottle/dp/B07GRD5WLD/ref=mp_s_a_1_1_sspa?crid=2ODA0V4H1UFR8&keywords=aerosol+mister&qid=1650224785&sprefix=aerasol+mi%2Caps%2C540&sr=8-1-spons&psc=1&smid=AV0RU55C0WCS...

I’ve been considering making this thing I saw on YouTube. Basically you frame the screens with 1x2s and staple mesh to the underside. Make however many screens needed, stack them up and stick the box fan on top. I’ve used one of those multi-tiered collapsible mesh storage things too, they work just fine. Like these: https://www.amazon.co.uk/AUHOTA-Hanging-Organizer-Foldable-Underwear/dp/B07TDQMHR6

Synthetic Filter Discs 90 mm, Wide Mouth Size, for a Buchner Funnel, Mushroom Cultivation, High Temperature and High Pressure Resistance (16 Pieces) https://www.amazon.com/dp/B08RYNCZM7/ref=cm_sw_r_cp_api_i_S0BN0YBR5HF0WH7DERVM

There's also these metal tea balls, they don't affect the flavor either, better for the environment, less waste

https://www.amazon.com/Fu-Store-Stainless-Strainers-Strainer/dp/B014KJ5WLI/ref=mp_s_a_1_3?keywords=tea+ball&qid=1649734516&sr=8-3

I saw these also and think they are probably better, in my experience the tea ball above actually does leak some leaf through the sides that you clamp together

https://www.amazon.com/Infusers-Stainless-Strainer-Steeper-Seasonings/dp/B08TCHDM5Y/ref=mp_s_a_1_1_sspa?keywords=tea+ball&qid=1649734594&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE1SkU5MTJKVFlGOVYmZW5jcnlwdGVkSWQ9QTAyNDQ5Mj...

There's another one my friend in highschool has that's like a pitcher with an infuser that you pump to soak the tea that I've seen people on here use but I can't find it but that's the best one too bad I can't help you find it

As an avid loose green tea drinker... yeah, it's a game changer.

Another game changer for me was one of these. Perfect for making fresh ground ginger tea, which can help with nausea.

This works pretty well https://play.google.com/store/apps/details?id=com.glority.picturemushroom

but as the app will say multiple times don't use it as ur only source to identify and if you not experienced in mushroom hunting or have any doubt don't consume seek experienced hunter but from the picture and that you found it in 🐄💩 if it bruises blue I'd feel pretty comfortable chowing down my self

https://www.amazon.com/Magic-Mill-Food-Dehydrator-Machine/dp/B07ML4ZJQP/ref=mp_s_a_1_9?crid=Y4DLUFCN867T&keywords=food+dehydrator&qid=1649623534&sprefix=food+dehy%2Caps%2C402&sr=8-9

I like this one for the adjustable shelves. Also you can adjust temp, but you can get that out of a $70 one.

Hope it helps! And this is the exact bottle I use. Incredibly cheap but makes an AMAZING mist.

Continuous Mister

I use one hole that size coverd with .003um filter sticker for my fae and the other hole gets a self healing plug. Perfect. (picked up dozens and the stickers for like 11$ next day thru Amazon) https://www.amazon.com/dp/B09MT9BDYQ/ref=cm_sw_r_oth_api_i_215VQ68M9S5R83WX2QZV?_encoding=UTF8&psc=1

I think size plays a big factor in me saying this isn’t worth the money. The work space is tiny compared to what you’d need. Save the money and invest in a quality work space. I’ve had good luck with this flow hood in my workshop and I’ve been happy with it.

You can buy the parts mostly assembled

Treedix 5-12V ZVS Low Voltage Induction Heating Power Supply Module with Coil Power Supply Heating Power Supply Module https://www.amazon.com/dp/B086V6CYM6/ref=cm_sw_r_cp_api_i_61575HWXGAM9PF5K560K?_encoding=UTF8&psc=1

What temp/time do you leave them in for and what type of bag? Me personally I set it at 140f for 22.5hrs then into a mylar bag with a medium desiccant pack and small oxygen absorber, 100 Pieces Smell Proof Mylar Bags Resealable Odor Proof Bags Holographic Packaging Pouch Bag with Clear Window for Food Storage Gloss Eyelash Jewelry Electronics Storage 4 x 6 Inch (Black) https://www.amazon.com/dp/B08LVDNQSY/ref=cm_sw_r_apan_i_SJRNYDHXF0SBWD7XT9Y7

Ok, calm down we are here to help. Do you know the actual humidity level inside the tub right now? Would you happen to have a temp/humidity meter?

In addition to a temp/humidity meter, you should consider spending $20 at Amazon and buy yourself a probe that will tell you the moisture level of your substrate. It’ll give you a peace of mind when you’re in doubt:

https://www.amazon.com/dp/B09N36NBG2/ref=cm_sw_r_cp_api_glt_fabc_PNK0HCXWADB0PT24PKRK?_encoding=UTF8&psc=1

Just use a programmable electric socket that measures heat and humidity. I'm a programmer. I right thought about using a raspberry pi but then I thought.. why make my life even more difficult.

Pymeter Humidistat Temperature Humidity Controller Reptile Mushroom Greenhouse Thermostat Dual Controlled Outlets Heater Fridge Humidifier Dehumidifier https://www.amazon.com/dp/B08SXWSPZJ/ref=cm_sw_r_apan_i_0DJP48D0818BJPVEFVQJ?_encoding=UTF8&psc=1

Also make sure you get a heater and humidifier that have a mechanical on/off switch. Not a digital one.

Like this: Amazon Basics 500-Watt Ceramic... https://www.amazon.com/dp/B074MX8VN5?ref=ppx_pop_mob_ap_share

I believe that high proof alcohol doesn't mix well with chocolate, makes it "seize".

Quora, for whatever it's worth.

YMMV, of course, and it'll depend on how fast you add the alcohol and how much water it contains and at what temperature, so with some trial and error you'll probably find a good point.

You could always go really DIY and get a melanger to make your own from nibs, toasted cocoa nibs+powdered sugar+mushrooms and some time in the melanger should give an excellent result.

Red Heavy Duty Self Healing Injection Ports (20) https://www.amazon.com/dp/B08TCL3YKH/ref=cm_sw_r_apan_glc_i_M5HE2WMJ33PNPNJDNTTH?_encoding=UTF8&psc=1

I prefer the red high temperature gasket sealant. RTV or Liquid gasket. It works pretty good and lasts.