What are /r/EntExchange's favorite Products & Services?

From 3.5 billion Reddit comments

Here’s an Amazon deal with the better fan right now

iPower 4 Inch 195 CFM Inline Fan Circulation Vent Blower and Air Carbon Filter 8 Feet Ducting Combo for Grow Tent Ventilation, Kits, Black https://www.amazon.com/dp/B08BF5GWKZ/ref=cm_sw_r_cp_api_fabc_lEtUFbSF0JEQM

Shipping though is likely expensive for all this stuff if you’re not Amazon though so I get where you’re coming from.

Might be best to bundle all this together and see if you can sell it locally

It’s only $20 from amazon and free shipping, Here’s the link

Skywin Smell Proof Hard Plastic Case for PAX 3 and PAX 2 - No Smell Odor Resistant Pocket Carry Case https://www.amazon.com/dp/B0766M9SVY/ref=cm_sw_r_cp_api_7NhIAbRXCW0FW

Amazon -

Pax 2 / Pax 3, NO SMELL protective case with removable stash container; pocket carry with screw top (black) by Skunkcase https://www.amazon.com/dp/B01KQOAJKK/ref=cm_sw_r_cp_api_Nmw3zbN6QP6Q1

the DBV is great! i have it and got 3 of my friends to get it. you should look up their store on ebay. this one is a 110v for US and right now they have one up which is rare. the only reason why they sell on ebay too is to get rid of their "defective" products. but dont be scared of that because when they say defective its more like its not pretty enough to sell. there is nothing wrong with the product working but there could be a small dent or in my case a 2mm x 2mm chip in the paint.

edit: capitalized US

https://www.paypal.com/webapps/mpp/security/verification-faq

This should help get you on the right track, a verified PayPal is an added security measure since it requires you to link your bank account.

Pictured are two recyclers, both brand new. Only filled with water so I can test the function to make sure they made the grade!

I am selling these (I make bunches) @ $125 through December, then they go back to $180. They sport a four hole puck perc, function videos available on request!

Hit my up for customs, and check out my Instagram to see my progress!

Now that you mentioned it, in his profile he says it is not his design. I found the design on thingiverse, and here is the Creative Commons license, where it states:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

So, long story short, he is violating the license.

Puffco Peak Replacement Glass Attachment Accessory OEM Part (Royal Blue) https://www.amazon.com/dp/B086ZZX9NQ/ref=cm_sw_r_cp_api_glc_fabc_UJv4FbPZDW9H2?_encoding=UTF8&psc=1 Here’s this if you can’t find one at least

Amazon has the them for cheaper

Yea no problem, and thanks for the compliment!

Absolutely, here ya go.

This rabbit hole is a whole lot of fun, that's why I still make them lol. Like my profile says if you have any questions feel free to pm and ask me, and if you aren't already a member of r/inductionheaters, I'd definitely suggest going over to check out some of the guides and other general induction heater things myself and others have posted already, you can find a ton of cool things and really anything you'd need to know lol. Good luck, have fun!

you can get one on amazon for under 20 https://www.amazon.com/Charger-Bracket-Suitable-Connector-Shovel/dp/B09FF7YLPF/ref=sr_1_3_sspa?keywords=pax+charger&qid=1644284093&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzVUVKRU5VVVlKTkZSJmVuY3J5cHRlZElkPUEwODAyMjM2MU5H... it's the one you are looking for

Would you be willing to trade the stemless for something like this?

Make an offer, I promise not to be offended if I think its low lol. Plus its a simple piece, not tryna break the bank on anyone there's just another piece I want that's available right now. http://tinypic.com/r/2rxitjr/8 water test, came out sized weird from the site I used to upload it. I have the piece slightly overfilled and still didn't get water in my mouth.

Appreciate it! We do all custom pieces, and we also do engraved glasses, both drinkwareware and smoke pieces. As well we have a customer appreciation sweepstakes going on if you or anyone you know is interested!

Check out this little deal were working on here and let me know if you might have some people interested! THanks

https://drive.google.com/file/d/0B_U5yUDso5BIZUFDQV9Kak93TWM/edit?usp=sharing

Found it!

Aibiubiu 14 mm Male to 14mm Female Essential Adapter Glassware Connector Reusable https://www.amazon.com/dp/B09L463457/ref=cm_sw_r_cp_api_glt_i_8SM4CB5W9AP35ZZG3SJ0?_encoding=UTF8&psc=1

Really need to move these two rigs, they've been in my possession long enough not being used and I want them to have a home! I am asking a mere 95$ shipped for the bottom rig, it's a 3 hole perc and has awesome function! Here is a Function Video from my instagram, it slays the game! The video is me ripping with all I've got

The top rig I am asking $155 shipped but I am open to bargaining. I can post a function video if someone is serious about purchasing.

Thanks Entexchange! Also I love doing custom work so if you need a new hammer bub, standup bub, dry pipe, rig, 10mm, 14mm, bong, 14mm flower piece, anything at all please hit me up I'll give you a killer deal and make you some high grade shit. I am stocked on colors right now lemon drop haterade rozay purp rain slyme red elvis, all the crayons, amber purp you name it I've got it I have many happy customers from /r/entexchange also check out my post history for my glass on /r/lampworking to see some of my current jammies.

That one that you found for $185 is not from a reliable source. If oyu actually take the time to check the supposed source's reliability, you will see it's a highly disrespected website. I would not trust a webpage, especially in the sales of used goods, that only has 1.5 stars. With the reviews exclaiming about scams and how they can never actually buy the product they want or it doesn't seem to exist when they do get it, why would you trust this website? Does it really look like that piece is for sale on that webpage? They couldn't even take the 5 minutes to clear off their table to post a picture, and if you look at said picture closely, you will realize the pieces are only similar and not identical. https://www.sitejabber.com/reviews/www.letgo.com

If you search around more than just the first google result, you'll see that it's sold for $550-630 at smoke shops across the country, and I have yet to see another sales of it.

So yes, you can go order from a site that has reviews, lots even from the last month exclaiming how shitty and such a scam this website that you seem to post, or you can buy it here from a trusted and reliable source.

Just sayin.

http://imgbox.com/gallery/edit/ZN5capRswL/LRsRyzDcd1cGY9qW That's just a standard glasses case. the bulbous one is yellowish green and blue lined, the straighter, thicker one is a rose glass with red and maroon lines

I'm trying to think of something that will be a suitable trade. How about this keychain? It looks like a cat, made of strong abs plastic, but can be used defensively by putting the index and middle finger through the eye sockets and defending with the sharp ears.

http://tinypic.com/view.php?pic=2djrtqs&s=7

let me know if it's a trade, and I will send it to you first (private message me). Then you can send the awesome indian.

https://mail.google.com/mail/u/0/?ui=2&ik=039f24097b&view=fimg&th=14acb1f8d000ea80&attid=0.1&disp=inline&safe=1&attbid=ANGjdJ8QmQ_yTq6LCXVDfV46_U_l3m-HJ3Z81NqlQ7VvtjgY2co_Gqi9iUSBKRCJs7P7s9rydo7FQ_nN8TuLwc6CxRkyAdHQIofQ...

Unforunately, I don't, but it's super easy!

Just drop your 3mm rubies down the hole of the male end of the heater until they fill just beyond the screw joint (I think it's around 50ish balls). Then just push a small mesh screen in to hold them in place. I used ones like these https://www.amazon.com/gp/product/B07G8BCLXN/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

but I've heard that dynavap CCDs work as well.

As far as the term balls check this. Get mine here.

20 Pack - Quartz Pearl Beads Balls, 6mm OD Clear Quartz Pearls https://www.amazon.com/dp/B08L89DMSG/ref=cm_sw_r_apan_glt_fabc_MC9EDW9726KA6D6QKWKQ?_encoding=UTF8&psc=1

ZOZO 10W 5V2A (2000mA) Multi Tips Switching AC Power Adapter Replacement Wall Charger for Android Tablets Webcam Routers Toys Recorder Bluetooth Speaker TV Box USB Hub and More DC 5v Devices (5V ONLY) https://www.amazon.com/dp/B01ALGGK2O/ref=cm_sw_r_cp_api_glt_fabc_RMRHZHRTAT74B6QQSEK6

Would this one work? Thanks for all your help!

https://www.amazon.co.uk/AmazonBasics-Hard-Camera-Case-Medium/dp/B01L0LVDJO/ref=sr_1_2?ie=UTF8&qid=1551885287&sr=8-2&keywords=amazon%2Bbasics%2Bhard%2Bcamera%2Bcase&th=1

maybe this since you're in the UK

https://www.amazon.com/SWAG-Machined-Thumb-Hydraulic-Bottle/dp/B07FT1NS8R

So on the jack there is a release knob you have to tighten to make the jack go up and then when you are done you turn it and the rod comes down. Normally you have to take the handle and use it like a wrench to turn the knob back and forth. it's very handy to just have a permanent knob on there you can turn by hand. people sell them on Etsy, eBay, Amazon, just 3d printed (or milled).

I have had good luck with this one. Just do not read the specs. There is a catch. It will not supply enough amps plugged into wall. You have to have it unplugged and use batteries. Get a bunch of clicks out of a charge. https://www.amazon.com/dp/B00ME3ZH7C/ref=cm_sw_r_cp_apa_i_uS0jFbZSGK7S0

Technically nothing, you could assemble the parts and it would work with everything that's included. All that you would really want is any enclosure, maybe something like this. https://www.amazon.com/dp/B07TS6RY85/ref=cmswrcpapaiAyhxDbV7EHBCN

Indeed it is! I picked it up on Amazon here, if you're looking for some they work great but you have to solder the resistors on yourself

I got this Large Smell Proof Bag on Amazon and am in LOVE with it! Highly recommended. They have various sizes and it is well worth $40. Comes with smaller smell proof bags and a heavy duty grinder

I just got my first Mighty yesterday and am blown away!

https://www.amazon.com/YETAIDA-Adjustable-Power-Adapter-3-12V/dp/B07RB1HDGG/ref=mp_s_a_1_13?keywords=variable%2Bpower%2Bsupply&qid=1575754034&sprefix=variable%2B&sr=8-13&th=1&psc=1

Looks like prices might be going up...

Like new condition. A friend of mine ordered it and tried to use it, but didn’t know how so he gave it to me.

To use the water pipe adapter you will need some stainless steel screens. Any should work, I recommend these: https://www.amazon.com/dp/B07G8BCLXN/ref=cm_sw_r_cp_api_i_ZhU7DbH4Z9N7R

Edit: It works perfectly, my friend just didn’t know how to use it. Tested it out myself to make sure before listing it.

$50 with free shipping on Amazon or $40 from this hardware store. So it's just $50 max for a brand new torch... Not $85 for that shitty, used combo. I need what you're smoking if you think you have a good deal haha!

Good try though.

I have a 3 but it doesnt work afaik, I left it on the charger and forgot about it for a while...... I think it just needs new eneloops (obviously over charged the other ones). I'd part with it for $40 plus shipping, then you would just need to buy the eneloops for like ~$13. If not I'll prob just buy them to see if it works and list it at ~$60-$80 in a couple months or so.

https://imgur.com/a/xksFb - Asking $190 shipped - Forgot to photo it but this case is included: https://www.amazon.com/MTM-Single-Handgun-6-Inch-Revolver/dp/B000H8ZWYE/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1506201840&sr=1-1&keywords=mtm+case - F*** yeah even the CASE is USA MADE!!!

Hey guys, don't use my 10mm rig very much and looking to get it to a new home. If you want USA made but don't want to spend heady amounts here is a good bundle. I have used it only about 20 times, definitely under 30! The whole setup cost just over $400 new (rig was $140, nail was $160 but some places sell it for $195, cap was $90, travel case was $15). The nail is in great shape, always cleaned with a qtip immediately after using, obviously used though. No chips or other cosmetic imperfections anywhere. The cap very slightly different than the one in the screenshot but I paid the same amount for it back when they were called Capstars. The rig is killer and hits like a champion. I have 4 other rigs i usually use and this was only for special occasions when I had people over and never left the house! Usually I use an enail and rarely broke out the torch.

*I'm hoping to sell it as a bundle, but i'd sell the rig itself for $100 shipped, or i'd sell the nail and cap as a combo for $150 shipped. * $10 off if you dont need the travel case, and i will wrap it in tons of bubble wrap.

I know my camera phone pics suck but if you want better photos of anything let me know.

Here is the page on Alesis's site for them.

and Here is the amazon overview page for them, including the reviews. (3.4/5.0)

They do not need to be connected to an amp or mixer/interface. They use the regular rca cables for input.

I like them.

I gotta admit dude your name is probably gonna scare off a ton of potential buyers, and has me wary. But if you're legit, and use Canadian currency, that's awesome dude and hope you find what you're looking for. Here's the link for the FG Magic Flight Finishing Grinder (Natural) https://www.amazon.com/dp/B00GNKFOUC/ref=cm_sw_r_awd_.wq3vbH1NWPQ4