What are /r/Louqe's favorite Products & Services?

From 3.5 billion Reddit comments

I used these feet from Amazon https://www.amazon.com/dp/B073WMSQ21?ref=ppx_pop_mob_ap_share

This is how they look. I like the fact that they're rubberized so they don't slide on my glass desk https://imgur.com/gallery/dAJbd6u

I’m using Fan Control, which after experimentation I’ve found to be the best by far. Only downside is that it doesn’t run as a service.

It can do exactly what you’re after and much, much more.

this was the pre-order link that was posted in the sub before : https://amazon.com/dp/B089Q83N7C

going through the original post, it seems it's already sold out and they are restocking (again) asap.

https://www.amazon.com/Noctua-NH-L9x65-Premium-Low-Profile-Cooler/dp/B00VB3Y89E

​

it used to be recommended as a safe choice for the S1

A small number of units might just pop up via the official webstore, but a large Limestone TopHat should still be available via <strong>Amazon US</strong>.

Put a fan cover over the 120x25mm.

I used (this)[https://www.amazon.com/Bgears-Cooling-Fan-Grill-120mm/dp/B00315C02W?pd_rd_w=YB8JY&amp;content-id=amzn1.sym.fea327c4-5fbe-469f-b9dd-c809442d925d&amp;pf_rd_p=fea327c4-5fbe-469f-b9dd-c809442d925d&amp;pf_rd_r=C2H8AKDCYJBD89MXSZA0&amp;pd_rd_wg=MMe1h&am...]

I used the regular PSU cables with no issue.

May want to double check that as this link is coming from the US Amazon store.
https://www.amazon.com.au/LOUQE-Ghost-Limestone-Mini-ITX-Computer/dp/B088QTJMKW/ref=sr\_1\_2?crid=3FS066NEKKANE&amp;keywords=louqe&amp;qid=1669101118&amp;qu=eyJxc2MiOiIzLjE0IiwicXNhIjoiMi4yNSIsInFzcCI6IjAuMDAifQ%3D%3D&amp;sprefix=louqe%2Caps%2C230...

Not sure if you saw but the Ash large tophats are back in stock.

Have you thought of GPu power U TURN 180 connectors to see if you can pull that off and have a top fan on the bracket?

Example…

Good luck! I'm not sure what your GPU requires/can fit regarding deshroud and fan replacement, but I've used this adapter on all my replacements (1060, 2070 & 3070) , to fit 2x Noctua A9x14 PWMs.

For the feet I use this one. It’s working well. feet Amazon

The cooler you are using is great.

Do you have exhaust fans (you should at least have a slim one under the PSU). If you have a top hat you can have 2 more.

Just search for "speaker feet" honestly - they're all fairly simple adhesive-backed rubber. Something like this:

https://www.amazon.com/Sound-Addicted-Subble-Isolation-Suitable/dp/B08FD7QMP7/

But any height/shape you want also works. Peel off the old ones, Stick the new ones on.

They are Noctua NF-A4x10 PWM fans. I purchased mine on amazon; where you'll find more details:

https://www.amazon.com/Noctua-NF-A4x10-PWM-4-Pin-Premium/dp/B07DXRNYNX/ref=sr\_1\_3?crid=10B5TRVQ749PX&amp;keywords=Noctua+NF-A4x10+PWM&amp;qid=1641633877&amp;sprefix=noctua+nf-a4x10+pwm%2Caps%2C61&amp;sr=8-3

I have a Zotac 1080 Amp Edition in an NCase M1, which had the same problem. I bought a pair of these to solve the problem. https://www.amazon.com/gp/product/B07P5R258Q/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&amp;psc=1

Not OP, but I'm using an older version of these:

https://www.amazon.com/SilverStone-Technology-Mystic-BIOSTAR-LS02/dp/B01MV46VAF/

Have them running along the interior sides of a Large tophat on top, on either side of the 120mm rad and fan there. I'll grab some pictures if I remember when I get home, but it looks nice going up through the grill.

I recently got these for my Ghost S1: https://www.amazon.de/-/en/Oehlbach-Effective-Resonance-Dampener-Absorber-black/dp/B0047T6WXY/

They have a larger diameter and are roughly double the height of the stock but don’t give it a floaty look in my opinion and still improve airflow. Plus they basically look stock :D.

FWIW I’m trying these for my build when they come this weekend.

Conical Rubber Bumpers Black - 16 PC Combo - Tall Rubber Feet Spacers for Electronics, Computer Equipment, Speakers, Car Truck Bug Deflector, Cheese Boards, Furniture, Cabinet Door https://www.amazon.com/dp/B075KZBR2Y/ref=cm_sw_r_cp_api_glt_fabc_9EK3M2B0VF13D07T0F91?_encoding=UTF8&amp;psc=1

that wont fit.

this one does fit on ghost with small tophat

https://www.amazon.com/Vanguard-DIVIDER-BAG-37-Camera/dp/B003G2YZLE

I bought myself this sowing machine case for my louqe ghost S1 . It was 30€ of Amazon.

My gf is making me some foam pads to protect my screen . Besides that is it spacious enough for a dual large tophat louqe, a portable screen , keyboard and more !

Here is the link for those who might be interested .

https://www.amazon.fr/dp/B088R8BQTN/ref=dp_prsubs_1

Happy 2021 peeps !

If you are based in the US Amazon has some available still: LOUQE Ghost S1 Tophat Mk III (Ash, Large) https://www.amazon.com/dp/B088QS1X7B/ref=cm_sw_r_cp_api_glc_fabc_G434FbKXN7KGP?_encoding=UTF8&amp;psc=1 there should be a color option for limestone

It’s very affordable I got it from amazon! VViViD XPO Black Carbon Fiber 5ft x 1ft Car Wrap Vinyl Roll with Air Release Technology https://www.amazon.com/dp/B00L9J4JRG/ref=cm_sw_r_cp_apip_831yG1RN5EONf

The card has two mini fan head connectors. So you will need two of these https://www.amazon.com/CRJ-4-Pin-Adapter-Sleeved-Graphics/dp/B07Q5BTTDX/ref=mp_s_a_1_2?dchild=1&amp;keywords=pwm+fan+gpu&amp;qid=1607944385&amp;s=hi&amp;sr=1-2-catcorr

All you really need is the install tool and the helicoils themselves, but the following link has everything you'll need:

https://www.amazon.com/Thread-Repair-Installation-Stainless-Helicoil/dp/B07HF6Y5LD

Do your own research to confirm fitment, but a quick google says the tophat threads are M3x.5.

On the AIO I have one of the hoses is forced down the GPU side of the frame and I'm unsure how to proceed. Please advise.

This card

&#x200B;

I use corectrl in linux to control the fans but I bought a gpu fan connector adapter in order to use the GPU temperature as a reference for the fan speed.

So the photos on this amazon page are darker than what it actually is? Comparing it to Jay's video which looks much more silver and clean looking.

Hmm I’ve shared the link before. They’re from amazon. Just some rubber sub woofer feet. I use double sided tape to get them to stick. Hudson Hi-Fi Silicone Isolation... https://www.amazon.com/dp/B075KPHZPF?ref=ppx_pop_mob_ap_share

I bought these and these 90 degree connectors for them on recommendation from another thread. Haven’t completed the build yet as waiting for the Mk3 stock to land so can’t speak to the performance yet though.

Went for these, haven’t been able to test them yet though, only going to use them for Bluetooth on an MSI MEG Z490I Unify though. User reviews on Amazon seemed ok. They are really small. Same boat as a few others here it seems, waiting on the MK3 cases to be available.

The bag is the Vanguard Divider 37 and it's pretty much an exact fit for a Ghost without a tophat. The only downside is that you can't fit much else aside from a few cables, so your keyboard, mouse, etc. will have to be carried separately. There's also no shoulder strap support. That being said, it seems very well made and the carrying handle is sturdy holding the weight of the Ghost. There's lots of padding on all sides, and the divider inserts it comes with can be repurposed for additional padding.

https://www.amazon.com/NOYITO-Chassis-Extension-Suitable-Computer/dp/B07PPDTB5R/ref=sr_1_1?crid=KUZP6XCLZ4QR&amp;dchild=1&amp;keywords=noyito&amp;qid=1601790938&amp;sprefix=Noyi%2Caps%2C195&amp;sr=8-1

This is the PSU I got since the price of sf750 is jacked up. Should have done a bit more research my mistake :/

EDIT: Spelling

I am pretty sure the original feet are something like this speaker bumper feet

guys you think this would fit standard louqe? im more concern about the length, louqe is 12.7inches in length the bag is 14inches but those side pouches though

https://www.amazon.com/CADeN-Messenger-Compatible-Mirrorless-Waterproof/dp/B07TWRBMFN

Yep, this is the alphacool cape corp coolplex metall HF 10

https://www.amazon.com/Alphacool-Cape-Coolplex-Metal-Black/dp/B01HQ8LU7K

They come in many sizes and there's some that have chrome ends instead of black, but I chose this specific one because I could have it as a permanent fixture inside the case on the GPU side if I wanted to.

Hmmm so if I'm starting a new build, then it seems like the best bet is just buy a RAM kit with no heatsink?

I guess just get something like Crucial kit would work: https://www.amazon.com/CT2K8G4DFS8266-Crucial/dp/B0736W5BH2/ref=mp_s_a_1_11?dchild=1&amp;keywords=ddr4%2Blow%2Bprofile&amp;qid=1594538718&amp;sr=8-11&amp;th=1&amp;psc=1

Since it’s unavailable, you have to google search it to find the actual listing. It no longer says it’s available but it does match up with Louqe’s timeline of mid-July. It’s just that now we have an actual date. Amazon

My bad lol, forgot which subreddit I was in.

&#x200B;

>22x14 Monoprice weatherproof/shockproof Hard case off of Amazon.

https://www.amazon.com/dp/B00SSFAPVI/

It's pretty much discontinued. If you want something blower sized you have 2 options (am using .CA, switch to .COM if needed):

• Asrock challenger: https://www.newegg.ca/asrock-radeon-rx-5700-xt-rx-5700-xt-challenger-d-8g-oc/p/N82E16814930020
• PowerColor (There is a 5700 XT variant of https://www.amazon.ca/PowerColor-Radeon-5700-GDDR6-Graphics/dp/B07WT15P2P but it isn't on Amazon atm, you have to specifically look for NOT a Red Dragon variant)

I remember reading that you can get a PowerColor Red Dragon to fit, but you'd need a low-profile power connector.

I just bought these from Amazon the other day. I did have to get some small nuts to fit inside of them, but other than that they are working great.

4PCS Aluminum Speaker Spike Shockproof 20x8mm Amplifier Feet Shock Absorber Amplifier Pads for Amplifier CD DAC Recorder Black https://www.amazon.com/dp/B07Q3PH2R6/ref=cm_sw_r_sms_apa_i_KP6OEbAY8VN73

Do you have a link? I was looking at these earlier on amazon UK ---> here.

Also, any pictures you could share? Would be interested in seeing how it fits, etc.

You can’t find it on amazon because it’s currently unavailable, which it won’t be in a couple weeks. But if you do insist here’s a link https://www.amazon.com/LOUQE-Ghost-S1-Limestone/dp/B07GNNXW4Z/ref=as_li_ss_tl?tag=optim0f-20&amp;keywords=louqe+ghost+s1&amp;qid=1560908758&amp;s=gateway&amp;sr=8-1&amp;linkId=f3d4ed8e0472b3f54c4e6361fb26393b

so this one should be fine?

https://www.amazon.com/gp/product/B07F84FJ1G?pf_rd_p=183f5289-9dc0-416f-942e-e8f213ef368b&amp;pf_rd_r=MQD2HE0K7M5B400ZNTAK&amp;th=1

Edit: they have two styles listed, sf and sf platinum. in the picture the sf platinum appears bigger, not sure if that to show the size or if it doesn't have an meaning. Guessing SF Platinum 600 would be okay for my Ghost S1 build?

Found this guy on amazon. Stupid question, any idea if other hardware is needed to connect the grill to the fan?

OKGEAR 120mm Fan Grill/Guard - Black https://www.amazon.com/dp/B005VRK5YS/ref=cm_sw_r_cp_api_i_1kLUDb646V4CH

I can still see pangea in stock.

https://www.amazon.com/gp/product/B07GNMFTHZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;th=1

&#x200B;

Edit

Sorry. I just saw your reply.

Pangea just came back in stock, shipping Sept 18th. It appears randomly for maybe half an hour before disappearing again. I ended up choosing this last week when it went in stock for a brief moment, and they actually ended up shipping it yesterday (?!).

Was sick of waiting for Limestone - come join the green side guys ;) https://www.amazon.com/dp/B07GNMFTHZ/ref=cm_sw_r_cp_apa_i_tv-EDbXA9THD3

The bubbles form naturally during the bonding process; it states this on the back of the container. Here is a link to the Amazon page where I purchased the acrylic cement.

> The product you bought might call it weld, but it really, its not.

This is the same product and technique people use to build acrylic aquariums. If it's good enough for them, it's good enough for me.

> Why do you think all mods/pro today use rubber gasket.

Here's an acrylic reservoir made by Swiftech that is joined with cement and not gaskets.

Edit: just responding to your ninja-edit, I use Weld-On 3 because I feel the faster bonding time makes the pieces easier to work with, plus it's one of the most commonly recommended acrylic adhesives along with Weld-On 4.