Apparently the leaked emails from Sony tell us everything we need to know. The original Rowan was an anarchist or something and he wanted to embarrass the government while only dealing with the Ghostbusters. Feig came up with the idea before even having a fully formed idea for the movie and became attached to it, whether or not it fit the final movie.
"I want in the third act to have the entire police force and army accompany the Ghostbusters to the final battle but since our villain only wants to deal with the Ghostbusters and wants to make the government look ridiculous, he possesses the entire police and army forces and makes them do a big ridiculous dance number in the middle of Fifth Avenue, thus neutralizing them (and delighting himself)"
I've uploaded the 3D printable models for the parts I had a hard time tracking down when building my Proton Pack. I've also uploaded a set of parts for the Particle Thrower here:
http://www.thingiverse.com/thing:95727
While I wouldn't say the parts are 100% accurate I think they're pretty close. If you have access to a 3D printer you might be able to save a few bucks on your next pack build.
She didn't like the New Ghostbusters? But she's a girl. Aren't little girls supposed to use the new ghostbusters as role models????
That being said, There is a Lego Ecto 1 set that isn't too expensive. The firehouse set is a great one, but goes for $350.
Funko Pops aren't toys, so I wouldn't suggest those. They are great collectibles, but not something to play with. Same with the Metal Die Cast figures.
Unfortunately, most of the classic figures are geared more towards the adult collector. There were some classic figures released with the new movie figures that can be found at walmart: https://www.walmart.com/ip/Ghostbusters-6-Classic-Egon-Spengler-Figure/50291836
I'd def make a free comixology account though. No cost and they lay out series sequences pretty nice. Also, I think you can actually read a lot of the GB series on there for free with Comixology unlimited. There's usually a free month trial.
​
https://www.comixology.com/search/items?search=ghostbusters&subType=COLLECTIONS
Here is another one that I thought got way too many good reviews.
It was actually this movie that made me really critical about where I spend my money on movies.
https://www.rottentomatoes.com/m/star_wars_episode_iii_revenge_of_the_sith/
In order to make these models you typically need to make a mold. Those molds are then used to cast the figure. The mold type and material used can effect the quality of the model itself and there are only so many times you can use a mold to cast the model. Eventually cracks or leaks will appear on the mold and thus you can't make any more models without making more imperfections which would diminish the quality or require hours of skilled man hours to clean and fix. Thus, there are a limit of models they can make per mold, so they need to make money based on each printing. Also the quality of the paint job will raise the price.
Compare the paint quality on these two figures.
Wonderwoman 19" $17.50
WonderWoman 19" Repainted $1600.00 latest ebay bid.
Yep.
RT and the general consensus always align.
Thing is, it feels like people rely too much on the critical reception of Rotten Tomatoes instead of seeking out individual critics with tastes that they like, and analyzing the pre-release content (trailers, teasers, clips, interviews, etc). Critics don't always have the audiences' same interests when viewing films. No, I'm not just talking about being 'paid off'. For example, some critics will snub action movies just on the basis that they are not 'sophisticated'. Others will bash animated films because 'they are just kiddie fare, who cares'. Some will be biased toward or against a specific company or group. There are honest critics that will give movies of all genres and types a fair shot, definitely. Some critics will also go against the grain. Still, it's important to seek out ones you trust and enjoy, and to also put your own critical thinking skills to work. There's times when people won't agree with even the critics they like, so it's down to individuals to ultimately enjoy a movie.
Check out Corcoran 995’s. I have Corcoran 985’s, which have more of a tread, but is the same in all other aspects. No matter what, try getting something with side zippers; they are a godsend. The zips on these are black rather than brass as in the movie, but I presume some sanding may help.
I have one I got off of amazon its the old jumpsuit that says venkman on the name tag https://www.amazon.com/Ghostbusters-Venkman-Costume-Khaki-T-Shirt/dp/B0017R79MC/ref=sr_1_1?ie=UTF8&qid=1469825920&sr=8-1&keywords=venkman+shirt
Thanks! Here's the amazon link:
https://www.amazon.com/gp/product/B07GW9P75T/
The logo patch is OK, I'll probably swap that out. But I'm really happy with the quality of the name tag!
Spot on what DanVonCarr said. But there was a limited edition 4K steelbook (which also came with exclusive bonus content), and blu-ray (I think). Then the Ghost Trap edition https://www.amazon.com/Ghostbusters-II-Afterlife-Gift-Blu-ray/dp/B09LGK58M5 that came out this year/late last year - which had even more content, including a never seen before work print of the original Ghostbusters. But the link that DanVonCarr provided is probably the best blu-ray set of the original films there is
I'm kind of an expert on Alice frames. The Rothco brand alice frame you find on amazon is exactly what they used in Ghostbusters Afterlife. It's a replica of the originals. But since it's what was used in the new movie, I assume it will work.
https://www.amazon.com/gp/product/B000KD3GTE/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
DON'T expect amazing quality but it's good for what it is.
https://cults3d.com/en/3d-model/art/ecto-1-with-lights-and-sound-with-detailed-instruction
yes an arduino nano
thanks
some pp plastic from a bowl
thanks!
Out of curiosity I did some poking around earlier, and came up with this: https://www.epicgames.com/store/en-US/product/ghostbusters-the-video-game-remastered/home
So there's that. Considering the tendency of Epic's platform so far I think it's safe to assume it'll be exclusive to their storefront. Honestly, I'll probably buy it again just to see the updated textures, but I'd love to see Multiplayer put into the PC port.
It could be the theaters that are causing the holdup. Either way, I submitted my email on Fandango to be notified when showtimes are listed.
Here. This should help.
https://www.facebook.com/groups/415038856140115/permalink/435819370728730/
And here is the replacement
: yueton 10 Pcs AC 125V 6A Amps... https://www.amazon.com/dp/B013DZB6CO?ref=ppx_pop_mob_ap_share
If you get some smooth on mold maker for resin, and cover up the broken part with sculpey. You can make a replacement pretty easily.
Smooth-On OOMOO 25 - FAST Curing Mold Making Silicone Kit - 2 Pints - EASY! https://www.amazon.com/dp/B01C4YQ4TU/ref=cm_sw_r_cp_api_i_r-zMFb2J6M7VE
Smooth Cast 65D Liquid Plastic Casting Resin - Trial Unit https://www.amazon.com/dp/B00E3ZJ9XW/ref=cm_sw_r_cp_api_i_8-zMFbQY1X8FB
You're not going to find it cheap anytime soon.
Volume 1-5 of the new release versions was on Amazon for $30. I think there's 12 episodes per volume.
It says "over 50 episodes" so I guess the number per volume varies.
As an FYI: The new Rubie's pack appears to be the Spirit pack, repackaged. It's on Amazon, ships free with Prime, and only costs $51 there vs. Spirit's $69.99. People have commented that the Rubie's PKE is identical to the Spirit PKE, but has crappier quality wiring. The same may be the case here, but that won't matter because you're using Spongeface's kit anyway, and gutting the existing wiring, I imagine.
Also helpful to know: Spirit is ALSO Spencer's Gifts, and they sell the proton pack online as well -- so if you decide to just get another pack and keep the second one for a next project or to sell to someone who wants to do a pack with a non-spirit wand, you can coupon hunt online for both Spencers and Spirit coupons.
This one looks identical and works with a Mac Keychron V1 with a knob
I like the keyboard. I upgraded from a nk65, which was too small for my hands. The build quality is nice, and you could defend yourself with it if someone attacked you. However I got lucky on Black Friday, and paid $90 for it. If you want the same look but not the cost, checkout the Keychron V1. Amazon link Keychron V1
>https://www.amazon.com/dp/B08HJGWKX3?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
>
>https://www.amazon.com/dp/B07L6RPYV9?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
>
>some rgb led strip and aluminum wire for armature
>
>I bought the wrong hose, meant to get heat shrink stuff instead but whatever!
It’s not as fancy as the Sprit pack (no lights), but have you considered the Afterlife role play toys?
https://www.amazon.com/Ghostbusters-Roleplay-Classic-Standard-E9538/dp/B081VZXP1N
The pack, wand, and PKE meter are all sold separately, but a full set was like $50 all-in. Might be a good alternative or perhaps a good plan b?
I have autistic sons myself, so I know how it goes. Good luck!
The box is pretty spot on, which is 25x 6 x 6.5. For the height with the stand it would be a tad more. I think something in these dimensions would work great:
Do not get this book. Buy this one instead. It's written by Erik Burnham (writer for IDW Ghostbusters comics) and officially licensed. The pictured one is an awful "fan"-made copy only about 15 pages long with grammatical errors, typos, and poor layout. It was clearly made by someone looking to make a quick buck with little to no effort.
Rothco is currently out of stock, but I ordered this one recently for a friends hiking trip; and it worked wonderfully, holding about 35 lbs of camping gear comfortably. He said it's been holding up great construction-wise. Don't let those elitists above gatekeep Ghostbusting.
My son lost one of my parts for this stand. I spent months trying to find a replacement, and the closest I could manage was this, which is unfortunately currently out of stock: https://www.amazon.com/gp/product/B0998VCBFG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
​
I was hoping the pieces would work with the Diamond stand, but they weren't quite the right size/orientation. They did support Slimer, though as it comes it's about half the necessary heighth. I was about to order a second set to extend it, but ended up finding my missing piece, so it wasn't necessary after all. YMMV, if you do find this I have no idea if they are consistent in their manufacturing or not.
I found this game to be very frustrating as I felt like the mechanics were pretty much broken with what you need to roll in order to capture a ghost. I personally enjoyed IDW’s board game much more. Easy to set up, easy to play, and incorporated the IDW comics run really well. Satisfied the GB itch much more than Cryptozoic’s game did.
IDW Games Ghostbusters: Blackout Board Game, Multicolor https://www.amazon.com/dp/B07N3CS7W4/ref=cm_sw_r_cp_api_i_317GB0ZHS2T0QHC02659
They’re Zener cards. The brand was Bicycle from looks of the design on the back. Something like these.
Positive reviews are, in fact, paid.
Here's your proof, from the sony hacks:
From George Clooney;
From: GC <> Date: January 29, 2014 at 11:05:39 PM PST To: "Pascal, Amy" <> Subject: Re: It's getting worse
I need some protection from all the reviews. Let's just make it a hit. I haven't slept in 30 hours. And it's 7 am.
Sent from my iPhone
On Jan 30, 2014, at 7:03 AM, "Pascal, Amy" <> wrote:
why is it getting worse
And we did cut tv spots with travers
But I'm sure sure they work as well as others
but I hear ya
Amy
On Jan 29, 2014, at 11:01 PM, "GC" <> wrote:
Can you get a rolling stone
https://wikileaks.org/sony/emails/emailid/162297
2 days later January 31, 2014 Rolling Stone writes a Glowing Review;
3/4 Stars
The Monuments Men is a movie about aspiration, about culture at risk, about things worth fighting for. I'd call that timely and well worth a salute.
http://www.rollingstone.com/movies/reviews/the-monuments-men-20140131
To be honest Im just using this cheap set from Amazon. I just started so I didn't want to go crazy on pricier paint. I'm planning to upgrade once I'm a bit better and this runs out.
I got one of those years ago and it was terrible. I've since upgraded a bunch but I bought this for my sister who was interested in vinyl... shocked how well it sounds for the price.
Then just have fun browsing and buying random weird shit from the dollar bin!
The brand is Hem:
Hem Incense Cones Variety Pack #4 And Cone Incense Burner Bundle With 6 Most Popular Fragrances https://smile.amazon.com/dp/B08VKY39YC/ref=cm_sw_r_cp_api_glt_fabc_YDNPG0385EPT5YTH8N4Z?_encoding=UTF8&psc=1
Amazon France is listing this for just 59.99 euros BUT its listed as a 6 disc set, that's two less than everywhere else.
The listing on Amazon FR says it contains a 4K and a BD for each film. Does that mean it's losing out on all the new extras then? It's still a good price for three films in 4K though.
It is still available for Amazon Canada for the Canadians out there.
okay, and? none of that matters. it’s all arbitrary, there are lots of ghostbusters fans that like every ghostbusters movie, why not have every movie part of the collection. I’m no fan of ATC but I would be interested in the behind the scenes and what went wrong, what went right which is why I’m even considering buying this box set in the first place (mostly for the featurettes of main 3 ghostbusters movies). I think that would be very nice to see side by side.
it also seems like you’re changing goalposts, you say the box set has to only have movies of a single continuity, I give examples where many film collections don’t have a singular continuity then you shift gears and say it only applies to animated films, so what? we’re paying a lot of money here, why remove content for such a stupid thing such as continuity.
hey wouldya look at that! two examples that prove my point with a single google search.
Ultimate Michael Keaton & Christian Bale Batman DVD Collection
checking on amazon UK and this one actually shows the "Frequently bought together" items as a ghostbusters badge and custom name tag.
The one linked here is still but it looks like the shop has other sizes too. I'm in the UK planning to eventually make one too but want to loose some weight first (Spengler wand is on the way though)
Amazon Canada has it listed for $99 as well.
I did come across this link a few weeks ago. At £150, I'm personally going to skip this one.
Garage Hooks, 12 Pack Heavy Duty Garage Storage Hooks Steel Tool Hangers for Garage Wall Mount Utility Hooks and Hangers with Anti-Slip Coating for Garden Tools, Ladders, Bikes, Bulky Items https://www.amazon.com/dp/B07XMDG83W/ref=cm_sw_r_apan_glt_fabc_1REFQ7M5P86X9VGZPQKJ
This should either be all the episodes or most. I can't remember if Sony's release was missing any. But $32 for a majority of The Real Ghostbusters isn't a bad deal to me. As for Extreme Ghostbusters, I think Crackle used to have the whole series streaming, but I've never used that service and do not know if it's even still around.
Your lucky! I tweeted about it when I found it so it was easy to get the link. Here you go!
I remember reading that Dan Akroyd could say what all of it was supposed to do.
Also I believe this book explains most of it.
This is a solid flight suite, straight from gbfans
https://www.gbfans.com/shop/uniform/khaki-flight-suit-coveralls/
But if you want something more authentic, then amazon, but at a much higher price…
Propper Mens CWU 27/p Nomex Flight Suit https://www.amazon.com/dp/B007HOMMDU/ref=cm_sw_r_cp_api_glt_fabc_G1QQDK1RDP9ZGWAN0W5Y?_encoding=UTF8&psc=1
Amazon has a gift set listed for £150!!
Ghostbusters Gift Set UHD (8 Discs - UHD & BD) https://www.amazon.co.uk/dp/B09K172F42/ref=cm_sw_r_apan_glt_fabc_XZ288JBNRRN7VZ2EF48E
It's eight discs so that's all four films in 4k and Blu-ray? Special packaging? Model of ECTO-1?
I remember grabbing the collector's boxset with the firehouse, way back when:
They should make new copies of it for the fans that got back into GB now.
Well if you have an ender 3 ($167 from the creality site) you can 3d print these files. It has pretty much all the pieces with a few exceptions like the mother board, alice frame and the lenses. As for electronics I would go with the ones Gbfans has.
If you buy an ender 3 from the creality site it's $167. It has a small bed, but there is a set of files that can be printed to make a full sized pack here
This might work I don't know how big the biggest part is but it is all divided into pretty small pieces. The creator says that the only hardware you will need is a lot 20 mm screws
It was 1-800-654-1984
Someone bought the number. I've never been able to find a recording that played when you called.
Here's an actually fake, skewed review I often point to that proves RT was fucking with the score from the beginning. It's the review from "The Straits Times" on the third page of reviews right now and you can see it has a 2/5 but also a positive, whole tomato. Other reviews with 2/5 have a splat even on the same page: https://www.rottentomatoes.com/m/ghostbusters_2016/reviews/?page=3&sort=
Edit: Even the 2.5 out of 5 directly above it has a splat!
I bought these to replace my crappy old Rothco's....
https://www.amazon.com/gp/product/B000G5Z41O/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
​
They're not Corcoran's, but they're pretty comfortable after breaking them in. I wore them all around Manhattan last month for the premiere, and my feet didn't feel too bad afterwards.
The stand looks like a 3d printed guitar stand. Anything like this would work. It's barely a stretch goal.
They're both on amazon in the US. Here's the Haynes Manual, and here's Tobin's Spirit Guide
I printed the decals myself and the push button I found on amazon. Here’s the link push button
Not a whole lot of detail as of yet but Amazon has a placeholder for a gift set containing the first two movies and Afterlife. Looks as though it will be available in 4K and BluRay.
Thank you! It has Gozers “Are you a God” quote but the neutrona wand is blocking it. But here is the link from Amazon
Ripple Junction Ghostbusters Are You A God? Adult Crew Neck Sweatshirt https://www.amazon.com/dp/B09BR9C65S/ref=cm_sw_r_cp_api_glt_fabc_VGCZ7EDX7JSTGMFXWMPH?_encoding=UTF8&psc=1
There are no stupid questions.
Which ones are you referring to? The Intensify momentary switch or Activate toggle switch?
The thumb switches both had to be trimmed down to fit inside the enclosure. So neither of those actually function anymore. The intensify momentary switch however still can be depressed as if it worked (same with the red one near the froward grip), the activate toggle switch however, is super glued into the on position.
Out of the two toggle switches on the body, only the bottom one actually works. The top had to be trimmed due to spacing, so it will flip like normal, but can never carry power.
I included amazon links to both types for anyone interested.
I ran the promotional images through an online upsampling program (https://letsenhance.io/) and they turned out great. Thought some of the rest of you might want the higher-res versions for your own personal (and non-commercial) use.
I meant by that is lazy low hanging fruit of comedy involving male schlubs. GB2016 is essentially pixels only with a icing of gender warfare marketing and it's what Sony thinks the public wants. They have a low opinion of the general public when they should be looking at themselves as the idiots.
Sandler has far more misses than hits.
https://www.rottentomatoes.com/celebrity/adam_sandler
He even has a movie they pulled the same week it was released. Making a whopping $24K out of a budget of 10 Million.
That because Rotten Tomatoes didn't have middle rating. just "Positive"(Fresh) or "Negative"(Rotten).
https://www.rottentomatoes.com/m/ghostbusters_2016/reviews/?sort=fresh
https://www.rottentomatoes.com/m/ghostbusters_2016/reviews/?sort=rotten
That because Rotten Tomatoes didn't have middle rating. just "Positive"(Fresh) or "Negative" (Rotten).
Most Critics give score around 5-6,C
https://www.rottentomatoes.com/m/ghostbusters_2016/reviews/?sort=fresh https://www.rottentomatoes.com/m/ghostbusters_2016/reviews/?sort=rotten
no, I screenshotted this myself, it is real, check for yourself
https://www.rottentomatoes.com/m/ghostbusters_2016/reviews/?page=2&type=user&sort=
in case I linked wrongly go reviews/TopCritics/Audience
FWIW, I use Chrome with an adblocker installed for most of what I do on my laptop, but for crap like Forbes I use Brave https://brave.com/ . Brave lets you into shit sites like Forbes without displaying anything. The downside being that there's next to no add-ons/extensions like LastPass or Fireshot. I'm also not sure what's going on with it in terms of updates, but since the last blog entry on their site was back in April I'm wondering if the Dev team is walking away from it.
No I actually didn't know..seriously..they keep advertising that big gray blob..
And..not a child.
This is the one I was talking about:
https://www.amazon.com/Star-Black-Jabbas-Rancor-Exclusive/dp/B011HRF7MK
It wasn't expensive at all and you got all those other figures with it.
https://galacticfigures.com/figureDetails.aspx?id=3422
MSRP is $129.99. I definitely saw it for less.
Cannon Sports Pro Series Volleyball Knee Pads with Extra Support for Volleyball, Soccer & Working https://www.amazon.com/dp/B07JHCVVV6/ref=cm_sw_r_awdo_navT_a_Y64AST5BMMFPPCCKCKFP Lightly with a Razor blade , shave the logos off paint on the black square and you’re golden
Hasbro Ghostbusters Stay Puft Products Mini-Puft Surprise, Series 3, Randomly Assorted 1.5-Inch-Scale Figures, 6 to Collect, Kids Ages 4 and Up https://www.amazon.com/dp/B081W1NHRF/ref=cm_sw_r_cp_api_glt_fabc_PA90WM5D97921GA82V2P
If you plan to drive with This stuff, My number 1 piece of advice is to first set up a frame that is securely attached to your car roof and build/strap/bolt your parts on from there. You can get stock crossbar and luggage rack frames off the shelf that will work. Walmart and Autozone have options for this
If you plan on driving with this, your parts NEED to be solid. This costs money - but so does a ticket or cost of damage if something falls off and dings another vehicle.
The exact model name is lost to me, but in researching Ghost Smashers vests years ago I remember the manufacturer/brand being FLYYE. They were costly so I opted to get this Condor Modular Vest, intending to spray-paint it grey and modifying it to look more accurate. https://imgur.com/a/FYVb9yO
The exact model name is lost to me, but in researching Ghost Smashers vests years ago I remember the manufacturer/brand being FLYYE. They were costly so I opted to get this Condor Modular Vest, intending to spray-paint it grey and modifying it to look more accurate. https://imgur.com/a/FYVb9yO
Printable Vinyl Sticker Paper for Inkjet Printer - 8.5"x11" 20 Sheets - Glossy White Printable Vinyl Sheets by JANDJPACKAGING https://www.amazon.com/dp/B07RDKKCM7/ref=cm_sw_r_cp_api_glt_fabc_VCZ6EBN2AEGKJDJSDPA9
For a GB1 style name patch, I would recommend Katarra8 on eBay and Etsy. For a GB2 style name patch, I would recommend GBFans, which is a great resource for plans and builds as well as a nice store for parts.
For a budget approach to a GB outfit minus the proton pack, check out this: https://www.primermagazine.com/2015/spend/make-this-screen-accurate-ghostbusters-costume-with-80-available-from-amazon-prime
For elbow pads, it might take a little doing to remove the logos, but check this out: https://www.amazon.com/dp/B07JHCVVV6/ref=cm_sw_r_cp_api_glt_fabc_VJYQVB07Z8HCHEFK5JRE
It’s also on Apple Music if you’re a subscriber and so is presumably on the other streaming services as well — and if you prefer physical media it’s apparently also out on CD.
I came across this and thought it might be something that would work for this set for you. It's not lego, but Playmobil isn't far off in the way they look and the figures are a little closer in scale to the car.
Well, there was a board game crossover (of all things) announced, but outside of the minis being sculpted there hasn't been any news on that in almost a year.
There's also a puzzle of the boxart you can buy, which is the closest to a crossover there's been.
A cheap seam ripper is amazing for taking off the old Velcro. Just remember it is very sharp.
And for photos, I always try to remember if the thrower is out, the gloves are on. At least in the movies. Makes for better photos.
Could you drill some small holes and the clean then up/square them off with needle files?
https://www.amazon.com/dp/B07PPYWSCY/ref=cm_sw_r_cp_apa_fabt1_V48WFbBZVMD4P
If found this method to work really nice. It takes a lot more time, but you can always take more material away. It's pretty hard to put it back.
I’m basing my this off my collection since I bought the 4K as you posted and the steel book that came out later. Hopefully you can get your hands on the one you’re looking for.
This is the one I know for sure that has the newer footage.
Ghostbusters / Ghostbusters II - Set [Blu-ray] https://www.amazon.com/dp/6317782717/ref=cm_sw_r_cp_api_fabt1_aHoUFbRKDDF3Z
Amazon but I did not price shop or anything. It's made of some kind of cloth, came from china after a month.
If you are going to play the game now. I recommend the PC version. It has the better framerate of all of them. Most modern PC shouldn't have problems running it. You do have to track down some patches for it though. You can get download copy of the game on Amazon for 10 bucks if you are in the US. https://www.amazon.com/dp/B0044DEQ3Q/ref=cm_sw_r_tw_dp_U_x_oxzyCb34MATJB
The one for the Ecto-1 was an eBay purchase from China, so I'm am unsure. The Firehouse kit I used was from BrickLoot ordered via Amazon. BrickLoot Kit
Ribbon Cable [you get enough for more than 2, i think you could get 3 if you measure and cut carefully: https://www.amazon.com/dp/B07BKYKC78?ref=ppx_pop_mob_ap_share
The strap for the cable, and the ion arm are both "found parts" so to speak, i had a brass rod i got from an estate sale for the rod, and the strap i pulled out of a scrap bin at work.
I have the recent re-release Kenner Slimer, even the 80's original (somewhere around here?) but man, it always bugged me how out of scale it was as a kid. Thought this lil guy did the trick quite well! I think he nails the scale and cartoon vibe quite well, hes the slimer from "The Loyal Subjects" GB wave.
Here he is anyone here is interested - only $11 or so from Amazon!
All of these found in different targets across northern Virginia, with Gozer and Ray in the fredericksburg Va central park target, were last 2 of GB on pegs and my first finds. Dana, Winston, Peter at the Culpeper Va target.
Egon was hardest to find, but just snagged him this past Wednesday at Target 4310 Fortuna Center Plaza, Dumfries, VA 22025. There was the largest stash of GBs there I have seen yet, with at least 2 Egons.
However if your very likely not in Virginia, get Egon from Amazon! ($19.99) with prime shipping: https://www.amazon.com/dp/B081VZPCMP/ref=cm_sw_r_cp_apa_i_hm5.EbHMVVBV4
I found them on amazon no thanks to OP lol.
Unfortunately this is currently the best option in my opinion:
It’s not streaming anywhere anymore (I sincerely hope the new movie leads to its return to Netflix or something). The complete series isn’t really commercially available anymore either, but the above link will get you almost all of the original, non-“Slimer and” episodes, which are widely regarded as the best (I would also agree). I would advise against buying each season on amazon. There are 10 “seasons”, approximately 10 episodes each, not representative of the shows actual seasons at all, for 10 dollars each. The dvd set I posted is basically the same amount of episodes and is the superior value by far.
If you didn’t grow up with it like I did, and you’ve never seen the show, I honestly think you’re in for a real treat. It’s basically just more adventures of the Ghostbusters, which to be honest is all I’ve ever wanted from the franchise.
Awesome! If you can't find a circular LED strip that works you might be able to modify one of these road hazard lights. They have a mode where the lights light up in a circular, rotating pattern.
https://www.amazon.com/Flashing-Rechargeable-Roadside-Emergency-Magnetic/dp/B0757KS5W4
https://www.amazon.com/dp/B072JQRFNN/ref=cm_sw_r_cp_api_i_QuMPDbJ8GXS9F. I used that as the base with a repaint. Then I added cable cover over the hose (painting it made it sticky). The biggest mod I did was to the “gun” so I ended up cutting most of it down and housing it in a PVC tube. Not screen accurate by any means, but it’s close enough for a dog!
Edit: the whole base sticks to the back of her vest with just Velcro. It would still function as a water gun, but I don’t feel like making her haul however much water that is on her back. She’s 11 years old and arthritis is an issue for her some days.
The CTV app. Then you have to search. I don't know if you need cable subscription though, I have internet with Bell so I had no issue.
I was bummed too. Signed up for a Prime trial and a few days later it was gone. Did a search and found it on CTV of all places. Looks like they have some of Slimer and the Real Ghostbusters in there too.
Here's links to the two large Hot Wheels models:
Elite: https://www.amazon.com/dp/B00L6A0GTS/
Regular: https://www.amazon.com//dp/B00H529QPQ/
The Elite version is a lot more accurate than the Regular version, which suffers some of the same inaccuracies as the Jada 1/24.
I haven't managed to snag one yet but I have one on "back order" on amazon (it says they should be able to send it to me in about a month, but I'm not entirely convinced they'll get it back in stock, guess I'll have to wait and see.) I'm desperate for it though and considering ordering it from GBfans (despite the expensive international shipping, it's still a better deal than spending 300 or so on one I guess.) I would definitely stalk amazon though, because I managed to get Interdimensional Cross-Rip on sale and my "back order" of Mass Hysteria for cheap (if it ever arrives.) Here's the amazon link - https://www.amazon.co.uk/Ghostbusters-Mass-Hysteria-Erik-Burnham/dp/1631403362/ref=sr_1_1?s=kitchen&ie=UTF8&qid=1515545709&sr=8-1&keywords=mass+hysteria+ghostbusters
I had to get this one. I'm 6'3", wear a 54" chest, and the 54" X-Large Tall fits me fine.
The collars are pointed, not club, which kinda sucks, but hey, I figure I'm not going for a movie-replica, I'm going for as if I were actually hired at Ghostbusters and had to go make my own uniform.
I used the Zitrades kind. Though it looks like their battery design box has changed. I have one of these too although it's all green lights. One note: some of these make a high pitched noise. It's not audible in a room with any other noise, but in total silence you can hear it. Not an issue for us, but thought I should mention it.