What are /r/GunPorn's favorite Products & Services?

From 3.5 billion Reddit comments

Looks like a Pelican case. Foam comes with the case, but you have to cut it yourself with an electric hot knife or pay someone to do if for you. Well worth it, but you want to make sure you don’t plan on adding or changing mods to your weapons once it’s cut.

Pelican 1720 Rifle Case

That’s a $22, plastic, Airsoft gun. Notice how the picture cuts off the end of the barrel in an attempt to hide the orange tip. Also that magazine is clearly for BBs. I remember seeing this thing at Walmart. Here’s the Amazon link if any of you are curious.

Edit: A sentence

UTG Recon Flex, attaches on the 3+9 positions of a MLok rail.. Makes it perfect for this gun because it removes the bulk of a standard bipod. Here's a link ...

https://www.amazon.com/UTG-Recon-M-LOK-Bipod-Matte/dp/B071RS3QJS

In related news the UK just convicted a guy of having a "bomb making document" they would probably completely loose their shit over TM 31-210

https://archive.org/details/milmanual-tm-31-210-improvised-munitions-handbook

http://www.bbc.com/news/uk-30078041

It's a hook/arm brace/arm rest. You can fold it to the side and shoot it one armed (like if you're opening a door or...hanging out of a car or something.) They're removable, and that made them really hard to find since most people thought they were stupid and threw them out.

Or dual wield!

Those are Amazon specials. I do highly recommend labeling one's mags and uppers so you don't make a mistake. Also in case someone picks up your guns and doesn't have the good sense to figure out what kind of barrel it is. I shouldn't be so harsh it would be really easy to make that mistake hence the labels. Sighthound Ballistics 300 AAC Blackout Magazine Marking Band 4 Pack (Zombie Green) https://smile.amazon.com/dp/B074TYSPG8/ref=cm_sw_r_cp_apa_i_o6dfCbN7HFVC0

For those interested it's a prinz-waffen. They make a bunch of combination guns or "veirling" as well as being Incredible engravers.

Source: http://www.thisiswhyimbroke.com/four-barrel-combination-gun

http://www.prinz-waffen.de/vierling.html

I have the same gun (same color, too). Was also disappointed the factory case wasn't wide enough to support an optic. I just went with this cheap soft case on Amazon for $23. Fits perfect.

What you need is this:

Gun Storage Solutions Rifle Rods Starter Kit with Shelf Liner Gun Organizer System Store More Guns Easy Access for Safety with Nylon Woven Loop Fabric https://www.amazon.com/dp/B071CVZXSZ/ref=cm_sw_r_apan_glt_i_JB98BTEEEMQDCM8AFECW?_encoding=UTF8&psc=1

You can probably hold 6-8 more long guns in there if you use it.

Amazon Streamlight 69400 TLR-7 Sub 500 Lumens Compact Rail Mounted Tactical Light For Glock 43X Mos, Glock 48 Mos, Glock 43X Rail And Glock 48 Rail Subcompacts, Black, Box Packaged https://www.amazon.com/dp/B08XMDY4F2/ref=cm_sw_r_cp_api_glt_fabc_TF7ZN7J033NR3XHKVMH8

OK.. I don't think that I have been much of a revolver fan.. Until THIS! This is absolutely amazing, gorgeous and the low bore WITH a picatinny?! I can see this being added.. JUST sayin!

https://youtu.be/PBfK4d0NIu8

Mako Universal Picatinny Rail Mount Fits Most Pistols Th... https://www.amazon.com/dp/B004O6CDV0/ref=cm_sw_r_sms_awdb_imm_TT0ZNDAC10KGY88NMMHP

The straps are from Amazon:

https://www.amazon.com/dp/B07XYP17QT/ref=cm_sw_r_cp_apa_fabc_BEB65V59J1Q019TX0D1N?psc=1

I attached them using Kayak Pad Eyes found here:

https://www.amazon.com/dp/B07C3W9JR3/ref=cm_sw_r_cp_apa_fabc_EPE9KJ1RF79GT58WSG09?_encoding=UTF8&psc=1

I wanted a clean look that didnt cost $30 per rifle (like the big name solutions for weapons storage). Very happy how it turned out and the cost was under $500 for the entire project.

The safe is built into the wall, and has an internal door, as well as the outer door. I'll ppst the entire setup next.

Case Club IWI Tavor Pre-Cut Waterproof Rifle Case with Accessory Box & Silica Gel to Help Prevent Gun Rust (Gen 2) https://www.amazon.com/dp/B06XY1Z59D/ref=cm_sw_r_cp_api_fabc_CDKPFbSBBGZB0?_encoding=UTF8&psc=1

Upper receiver fit to the barrel is the most critical interface on the rifle outside your optic mount. variation of perpendicularly of the UR face that touches the barrel flange will cause drift.

Bexar Arms will sell an AEro upper receiver face lapped, or you can buy a $30 tool from amazon.

Wheeler Receiver Lapping Tool https://www.amazon.com/dp/B00AUEHRBQ/ref=cm_sw_r_cp_api_i_Oni6CbT83B0PW

Plenty of YouTube videos to see how to lap the upper.

Belt

Western Express Brown Genuine Leather .38 Caliber Cartridge Gun Belt (44) https://www.amazon.com/dp/B00JEHPUJQ/ref=cm_sw_r_cp_api_ATYLBbYPE7ASZ

Holster

Brown Right Handed Smooth Leather Gun Holster https://www.amazon.com/dp/B00JLK68FG/ref=cm_sw_r_cp_api_4UYLBb26GXF51

I rubbed both down with olive oil to darken and soften leather. Really helps

200 mags… good start! What do you use to organize / store / hold them?

I love the MTM mag cans and these:

https://www.emdomusa.com/Emdom-MM-M4-Modular-Magazine-Carrier-p/eu091.htm

https://www.amazon.com/Equipment-Tactical-Magazine-Carrier-Carbine/dp/B07JCNLJ75

yeah i seen a couple for sale that where made with kevlar in the inside if the coil but the end of just had these plastic parts melted around the end loops to hold in them in place they claimed 250lb breaking point. but i didnt want to spend the 30$ to find out https://www.amazon.com/dp/B071JCLFKL/?coliid=I2P0GSZDQKM5VQ&colid=3IZ049FUPZ4OV&psc=0&ref_=lv_ov_lig_dp_it this is it right here

never too early, but make sure you do it right!

https://www.amazon.com/Copper-Silver-Pearl-Kimber-Grips/dp/B07VWKWYBN/ref=mp_s_a_1_9?crid=P8N716HA4CY6&keywords=kimber+micro+9+grips&qid=1660953944&sprefix=kimber+mic%2Caps%2C161&sr=8-9

If you haven't picked up a battery powered light bar for inside your SecureIT check this out.

https://www.amazon.com/gp/product/B07TXZQFFN

Been using that for a couple of years now. It really makes it better and it magnetically attaches to the inside top with motion sensor on/off.

Aimpoint ACRO P-1 Red Dot Reflex Sight 3.5 MOA - 200504 https://www.amazon.com/dp/B07Q61DVZN/ref=cm_sw_r_apan_i_GGXWEV1PVF06B0RR63SQ

Shipped and sold by Aimpoint on amazon 19 in stock as of me posting this comment

If you want to black out the white engravings

Birchwood Casey, Westlake Market Aluminum Black Touch up Bottle (15125) with 25 Cotton Swabs for Restoring Guns (Aluma Black PAB17) https://smile.amazon.com/dp/B07HVB338Q/ref=cm_sw_r_cp_api_glt_i_YZYXJ21TPTDDM3HAT34F?_encoding=UTF8&psc=1

You can get some of this rubber liner for the Wall Control hooks. It's more grippy and less scratchy.
https://www.amazon.com/Rubber-Control-Slotted-Pegboard-Brackets/dp/B081S7P9CD/ref=sr\_1\_39?crid=3BELKNIWFVG3Y&keywords=wall+control&qid=1647323484&sprefix=wall+control+%2Caps%2C214&sr=8-39

I built this to have a range of maybe 25 yards. I have a Sig Virtus and 17s scar if i want distance shit. It is replacing my CZ scorpion EVO 3. I run a motorcycle dealership and i use it to clear my shop when alarm goes off at night. Most of the gangbangers around here love Draco’s. So i did not want a match up of 9mm vs 7.62. The scope i will prolly change out in future but its all i had in my pile of shit. The laser dot / shitty light i got on front was from a build i bought and dismantled from a buddy. I just threw that on there for shit and giggles. I have inly had the system for couple weeks and have not been to range yet. I am sure i will make changes once i do hit the range. As for the sling , i bought it at amazon

SOMA 2 Point Sling 550 Paracord Adjustable Sling with Hook and QD Swivels for Hunting https://www.amazon.com/dp/B08HVHHYZ9/ref=cm_sw_r_cp_api_glt_i_4MJ5XYFE47NK455T6CF7?_encoding=UTF8&psc=1

Here’s the link: Evergreen 100 Round Bullet Locking Storage Case - Travel Safe/Mil Spec/Waterproof/USA Made - for .22 LR.380 ACP, 9mm.40 S&W.45 ACP, 10mm, 5.7 FN.38 SPL.357 MAG.233 Ammo https://www.amazon.com/dp/B094WBMGRM/ref=cm_sw_r_cp_api_glt_i_HX763FRMF4B5Y1NQ49HH

Concealed Carry Iwb Kydex Holster by Houston | Lined Inside for Strong Retention and Maximum Protection | Reinforced Plastic Clip | Lightweight Durable | for Springfield Hellcat https://www.amazon.com/dp/B0858H9GM6/ref=cm_sw_r_apan_glt_i_2HEBH50364EV1DG48XJZ?_encoding=UTF8&psc=1

> Sepp Allerberger

The English version is called "Sniper on the Eastern Front: The Memoirs of Sepp Allerberger, Knight’s Cross"

https://www.amazon.com/Sniper-Eastern-Front-Memoirs-Allerberger/dp/1781590044

Obviously much more expensive to manufacture and difficult to obtain than a conventional round, but then again you'd only expect to use very few of them. The US had their own projects along the same lines.

If you go by Half Life 2: MMod, their MP7 could feasibly launch grenades out the second barrel.

This is the model of holosun i bought. It came with the mount.

HOLOSUN HE407C-GR Reflex Sight, 2 MOA Green Dot, Black https://www.amazon.com/dp/B07FPB3SMK/ref=cm_sw_r_cp_api_glt_fabc_AMBDDKE99NB1CV11N3JH?_encoding=UTF8&psc=1

That's all? I'm sure it's quite effective but you need to up your game mate :)

Have a look at K-baffles as used by the AAC Element, one of the quietest .22LR suppressors on the market. Should be a doddle to churn out on your printer.

It's a fixed blade.

Schrade SCHF15 7.9in High Carbon S.S. Full Tang Fixed Blade Knife with 3.4in Drop Point Blade and G-10 Handle for Outdoor Survival, Tactical and EDC https://www.amazon.com/dp/B00BMAC3TS/ref=cm_sw_r_apan_glt_fabc_BPJJQ08WB9CJ3RXAXVAV

COSCOL Rifle Cheek Riser, Buttstock Ammo Holder Adjustable Tactical Rifle Cheek Rest for 300 308 Winmag (Army Green) https://www.amazon.com/dp/B08HYRF9J2/ref=cm_sw_r_cp_api_glt_fabc_RTRR9PYTVVGXA9Y3H483?_encoding=UTF8&psc=1

Cool. Also https://www.amazon.com/Connectors-Concealer-Management-Organizer-Adhesive/dp/B07M9VLH4J/ref=mp_s_a_1_2_sspa?crid=3MDOIFA8ZV5BK&dchild=1&keywords=cord+hider&qid=1631423785&sprefix=cord+hi&sr=8-2-spons&psc=1&spLa=ZW5jcnlw...

this link you sent contains tracking information. when another amazon user clicks it, amazon will associate that user with you. take a look at this link, without the tracking info: https://www.amazon.com/Connectors-Concealer-Management-Organizer-Adhesive/dp/B07M9VLH4J

I have something that's pretty much like vikers but's some other brand and it's cheaper.
It does the job and it's sturdy, so I have no worries.
Antila Rifle sling

What optic is that?

Nooooo I meant that Streamlight Protac.

Here’s the link. $99.

Streamlight 88066 Pro Tac Rail Mount HL-X, 1, Lumen Professional Tactical Flashlight with High/Low/Strobe Dual Fuel use 2X CR 123A or 1 x 1865 Batteries - 1 Lumens, Black

https://www.amazon.com/dp/B06VTLLDH4/ref=cm_sw_r_cp_api_glt_fabc_C25DMGCYWGB7E3Y00H5S

TuFok Key Mod Picatinny Rail Section - Super Thin Key mod Rail Attachment Rail Adapter Mount,Height ONLY 0.27 inch/6.88 mm(Aluminum,3-Slot Black) https://www.amazon.com/dp/B07NQFZRT3/ref=cm_sw_r_cp_apip_Svz8UZRPTCiHo

Got it on Amazon

Concealment Express IWB KYDEX Holster (Carbon Fiber Black) - Inside Waistband - Adj. Cant & Posi-Click Retention - Claw Compatible - 100% US Made https://www.amazon.com/dp/B016D2OTXW/ref=cm_sw_r_apan_glt_fabc_22M68DCYNV1SCRTPE06H?_encoding=UTF8&psc=1

I believe it’s called an impact driver, or hand impact driver since most companies have a cordless version now.

Hand Impact Driver on Amazon

https://www.amazon.com/dp/B005BTT8JY/ref=cm_sw_r_cp_apa_fabc_yi-RFbH125JKS

https://www.amazon.com/dp/B00T8J9FGO/ref=cm_sw_r_cp_apa_fabc_Ij-RFbB4JMK9B

I use this combo just take off the clip on the flashlight

just a cheap one off amazon. https://www.amazon.com/gp/product/B01G0ACY9I/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

https://smile.amazon.com/gp/product/B001B2I9L8/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Beautiful build. Not sure if you're looking for suggestions, but if you are, I'd suggest taking a look at one of these. I was dong the same with an m-lok -> Picatinny rail -> bipod adapter ->bipod, and one of these things really clears it up and makes the bipod fit more flush onto the rail itself and it just looked "cleaner".

How's she shoot?

It's a bipod specifically created for the Tavor SAR.

Wow that's for all the feedback! When I was first looking into putting a red dot on my 22/45 Lite my local guns store had the Leupold reflex on the counter, I was seriously impressed with the quality and the reticle design was excellent! Unfortunately it's way above my price range, so I opted for the TRS-25. I've since switched it to my shotgun and I'm looking for a better suited optic.

I appreciate you weighing in, it's nice to talk to someone who has firsthand unbiased experience. I'll take a look at the Bushnell, since it's within my budget. Is this the model you have? https://www.amazon.com/Bushnell-Tactical-First-Strike-Riflescope/dp/B006UJ0280

This throw lever is seriously amazing! I broke one but it was when I took a spill down into a creek and my rifle just kept going. But for $20 you get 2 of them and all I did was put blue Loctite on the threads of the wheel thing and it's absolutely rock solid! And it's nice and big, and will fit any other scope every made basically.

i found one for $39 shipped prime. so i bought 5 of them :)

its really good quality. you will need to use blue loctite for the knob because it gets loose easily. once you loctite that thread, its perfect!

https://www.amazon.com/TACKSPORT-Rifle-Bipod-Tactical-Picatinny/dp/B01LWATDQG/ref=sr_1_6?ie=UTF8&qid=1495644038&sr=8-6&keywords=atlas+bipod

https://www.amazon.com/gp/product/B006PH69JI/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/iProTec-RM190-High-Powered-Firearm-Light/dp/B004BNROME/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1476069954&sr=1-1&keywords=iprotect+elite+hp+190

There are kydex/plastic versions of exactly what you just described already on the market, and they're inexpensive. Here's an Amazon link to the first one that popped up on a Google search. Bonus is that they look nice and you can keep it on the rifle even after you rectify ring height.

Good little excerpt. But doesn't explain why he wouldn't use a mount that replaced the rear sight considering he no longer has a front. Weigand makes a great one that i've installed many times before. It looks incredibly silly with the forward scope mount that we all see on black rifles. I get the scope and red-dot but the scope mount is unnecessary.

http://www.amazon.co.uk/Stealth-Camo-Tape-Woodland-Rifle/dp/B005RBY6S4 I used this kind of camo tape, it only sticks to itself so leaves no glue residue! But i also cut of some pieces of a camo tarp and put it ontop of 1 layer of tape and then just used some more tape to hold it in place, looks great!

No its not, http://www.amazon.com/InForce-Multifunction-Weapon-Mounted-INF-WMLX-B-W/dp/B00JL58DX6/ref=sr_1_2?ie=UTF8&qid=1432955440&sr=8-2&keywords=Inforce+WML is where I bought mine from.

Thanks.

I used a Nikon D7000 with a 35mm f1.8 on a tripod. A roll of white drawing paper from Utrecht, and a couple of inexpensive soft boxes from Amazon.

However I shot these similar photos outside on a cloudy day on a white tablecloth. If I hadn't accidentally left the ISO at 800 they'd be as crisp up close as the ones above.

How do you like that Viridian Green Laser?
I'm looking at possibly getting one for my S&W MP9mm.