To add on to this, the big source of smell with the Pax is the device itself and of course the herb; specifically getting it on your fingers as you load it. Don't forget to do a really great job of washing your hands after loading it and perhaps think of getting a smell proof case for it like this one. Personally I prefer these hard cases over the soft ones as they can be more thoroughly cleaned and hence remain smell free in the long term and also won't allow the bottom of the pax to pop open and spill your herb everywhere.
Got a brand new Pax 2 weeks ago. My only problem with it was that it was a little difficult to load the oven with clumsy fingers. So, I built a funnel and tamper 3d model and printed them on a 3d printer. They make loading and mixing MUCH easier. I can post pictures of the printed products later if you guys want.
My link above is for the funnel. Here is the tamper that goes with it: http://www.thingiverse.com/thing:586779
I beg to differ with the rest of the comments because I just got this newsletter in my e-mail... 2 things to quote from it
"we're making some changes" "we have BIG things in the works"
NO SMELL PROTECTIVE CASE for Pax 2 or Pax 3, ODOR STOPPING & pocket carry with interchangeable STASH CONTAINERS & lids, Pax 2 / Pax 3 Accessories by Skunkcase https://www.amazon.com/dp/B01KQOAJKK/ref=cm_sw_r_cp_api_i_Ja2NCbQH2NE74
This rocks
Looks classy thanks for posting. But I wish it was airtight/smell-proof.
I just ordered one of these from etsy:
Also, I'm tempted to get one from RYOT (Smell-proof) for all my accessories (charger, etc):
I got this email response-
Thanks for reaching out!
We’re sorry to confirm that the device you purchased is not from an authorized PAX retailer.
Although we can’t provide warranty services in this instance, we’ve included some helpful suggestions below that we usually provide to other customers in this instance. Please let us know if you have any follow-up questions or need further help.
Your PAX Pro, Mike
We strongly recommend pursuing a full refund from the reseller.
If you purchased the counterfeit PAX online, it may be a good idea to leave a public comment online for this seller to help prevent other consumers from purchasing counterfeits. We definitely want everyone to enjoy PAX as intended, and the phonies out there are no substitute!
We found these articles helpful for customers to show the reseller when attempting to get a refund or to provide to the bank or credit card company when disputing the charge: http://www.webwire.com/ViewPressRel.asp?aId=191951#.VEBDJildV_d http://www.marketwatch.com/story/potential-safety-issue-identified-in-counterfeit-pax-from-china-2013-12-27 www.paxvapor.com/counterfeiting
Worst case scenario, if you are unable to obtain a refund from the seller, the PAX Pro’s can offer $80 off of a PAX 2 purchase, if you’d be willing to send the counterfeit device to us to be responsibly electronically recycled.
The thing thats unclear is the email doesn't explicitly say I received a counterfeit, just that I did not purchase through an authorized retailer. Any experience that anyone might have that can shed some light on my situation would be greatly appreciated.
Thanks
So if the object is storage, don't look for a box that both locks and is smellproof and get two different boxes that work together and spend ALOT less money. Here is what I mean (no affiliation with any products or sites).
I would get this: https://www.walmart.com/ip/SentrySafe-Fire-Chest/34008333
and I would use this for a smellproof container: https://www.walmart.com/ip/Rubbermaid-Brilliance-Food-Storage-Container-Mini-0.5-Cup-4-Piece-Clear/54297077
Total cost is somewhat south of $30 and you get a bonus fireproof box to protect important docs!
BTW: I can personally vouch for the containers. I use the large one and it works brilliantly- "Burpable", smellproof, and latches shut.
Best of luck!
Skunkcase No Smell Protective Case For Pax 2 Or Pax 3, Odor Stopping & Pocket Carry With Interchangeable Stash Containers & Lids, Pax 2 / Pax 3 Accessories https://www.amazon.co.uk/dp/B01KQOAJKK/ref=cm_sw_r_cp_api_glt_fabc_JV0YQFSN66AARNW4MD7K
I have this one. It’s pretty smellproof and can hold my budkups in different compartments.
If you get this case, it comes with two storage caps on the top, so you can load one BudKup in the PAX, three in one cap and two in another cap, along with the BudKup removal tool. Six BudKups in total + tool.
Very very nifty, glad to see someone else figured out the set up as well.
Yup! It's a paxpack. I got mine from amazon.
https://www.amazon.com/dp/B00NK6CK4U/ref=cm_sw_r_awd_EMBnvb0C1E69A
I like it cause it helps you grip the pax without it slipping out of your hands.
Bought a new hard drive case off amazon and ended up using it for my pax 2, I like it because it fits all of my stuff so I can just throw it in my back pack. Here's the link if anybody is interested
https://www.amazon.com/dp/B00F5CKWBA/ref=cm_sw_r_other_awd_GgZhwbGZMJ1HV
Best of luck. It looks a lot like a SkunkCase which I just picked up off Amazon. $24, Prime. Works great at combatting the stanky stank.
Pax 2 Smell-proof Hard Plastic Case; Pocket-carry with Flip-top for Easy Access (Black) By Skunkcase https://www.amazon.com/dp/B01BFDN80Y/ref=cm_sw_r_cp_awd_zC1ixbDKGCF8B
Sorry, somehow I did not see that there were some comments on here. Yeah, I got the Titan case that a lot of people raved about, and did not care for it very much. But this skunk case on Amazon is totally perfect. Completely airtight an odor proof. Weird right now it shows as being out of stock on Amazon.
Pax 2 Smell-proof Hard Plastic Case; Pocket-carry with Flip-top for Easy Access (Black) By Skunkcase https://www.amazon.com/dp/B01BFDN80Y/ref=cm_sw_r_cp_api_OqKMxbT6KKKK9
Bought the skunkcase on Amazon. Have had it for 2 weeks now. Works amazingly well.
Pax 2 Smell-proof Hard Plastic Case; Pocket-carry with Flip-top for Easy Access (Black) By Skunkcase https://www.amazon.com/dp/B01BFDN80Y/ref=cm_sw_r_cp_apa_bFHryb4F86Q96
Amazon bro. Skunk case makes it. Pax 2 / Pax 3, NO SMELL protective case with removable stash container; pocket carry with screw top (black) by Skunkcase https://www.amazon.com/dp/B01KQOAJKK/ref=cm_sw_r_cp_api_a.9-zbG1Z848J
I put the avb in a French press then pour boiling water in and let it sit for 5 minutes then strain the water out. Repeat 3-5x until the liquid is light brown/yellow and mostly clear. Completely removes any nasty taste and still just as potent.
https://smile.amazon.com/Sanrio-Portable-Cotton-Makeup-Travel/dp/B086H3KR1Y
I also have a My Melody Case for my pax cleaning supplies.
I just grind up weed and then fill the container with ground bud. The shape of the container makes it really easy for me to pour some into the pax to reload.
Seconding this and adding a link because it's not clear what you are talking about to a newbie.
https://www.amazon.com/Adjustable-Pusher-Bottom-Accessory-Cleaning/dp/B07QTZL83B
You use this instead of the screen that comes with the pax. It gets you more airflow. The top has an adjustable screw so you can change how much material is in the pax while still keeping it packed tightly.
A case.
I have a silicone case from Amazon.
https://smile.amazon.com/Fironst-Anti-Drop-Protective-Accessories-Compatible/dp/B07Z8XY1YJ
https://smile.amazon.com/Fironst-Anti-Drop-Protective-Accessories-Compatible/dp/B07Z8Y8GLD
I've also seen some really nice cases/sleeves on Etsy.
I've dropped it a few times and am always thankful for the protection the case offers. I've seen some really busted and scrated up pax's but mine still looks new even with heavy use.
my 10,000 mah Anker Battery Backup works perfect
Its on sale right now with free 1 day delivery in my area
https://www.amazon.com/Anker-PowerCore-Ultra-Compact-High-Speed-Technology/dp/B0194WDVHI
It could be that you aren't packing the weed tight enough and also not grinding fine enough. I'll be honest a PAX really does take quite some fiddling with. Right out of the box I'm gonna figger 20 sessions before you actually get it dialed in. Here's something no one says out loud: you can not pack too tight and you can not grind too fine. Also BudKups...look on Amazon https://www.amazon.com/BudKups-Generation-Loading-Capsules-Portable/dp/B07HR1KPF9/ref=sr_1_2?crid=1A826MWZX19RF&keywords=budkups&qid=1653273685&sprefix=budkups%2Caps%2C139&sr=8-2 It is worth every penny!!! I grind with an old Mr. Coffee, coffee grinder and grind as fine as it will get it AND I pack as tight as I can get it packed in there with a plastic tamper (this is with BudKups so with the bare oven just don't pound it with a hammer!!). My assessment of what you are seeing is you just plane don't have enough weed in the PAX to create any vapor. If your ABV is black then that's probably the case. Also - a good session is 2 petals till no vapor then 4 petals till no vapor. As a beginner I used 1, 2, 4 petals - that helps a lot with the hot problem.
I've had this smellproof Skunkcase since 2019 and it's been a life saver.
especially after a heavy session. even use the top lid storage for fresh and abv.
https://www.amazon.co.uk/Skunkcase-Protective-Interchangeable-Containers-Accessories/dp/B01KQOAJKK
I admit though it's doubled in price since i bought it.
It takes some practice to get it just right, but once you it's amazing.
Very fine grind. Half-pack lid, I still can't get a decent session with a full bowl, it just doesn't produce for me like half pack does.
The pack is the hardest part to get exactly right. It needs to be tight enough that the heat can distribute well but not so tight that you can't draw through it.
I also recommend replacing the lid and the screen with the 3d vented versions. Here is a cheap one but better ones do exist.
https://www.amazon.com/Adjustable-Pusher-Bottom-Accessory-Cleaning/dp/B07QTZL83B
Damn, I bought a cleaning rod on Amazon a few years ago, but now it's not available. I did find a combo that comes with a rod, pusher, and 3D screen.
I'm using the black power cord it came with but it doesn't come with a wall adaption for charging so I've been using this
I ordered one of these from a guy on etsy: https://www.etsy.com/listing/168557221/hard-case-for-pax-by-ploom-shatterproof
He customizes the colors etc... Also comes with two dube tubes. I use one for fresh ground stuff and the other for ABV. Totally smell proof.
He says its not water-proof but it seems pretty darn close. Definitely protects it from the elements and fairly shock proof too. Not tiny but not that big either.
What smells the worst is breaking out the herb and packing it and dumping/flushing it out when you're done with it, etc. Just make sure you stay next to the window during all that until your herb is sealed and stored. And start burning a candle like 20 minutes BEFORE your session begins... and keep it near the door... and then keep it burning for like 30 minutes after you're done and the window is still open.
The PAX will get smellier and smellier as time goes on, so you will need to keep it in a sealed environment when it's not in use:
https://www.amazon.com/Pelican-1020-Micro-Carabiner-Black/dp/B001CNNERA
I downloaded it from here:
https://apkpure.com/pax-vapor/com.pax.app
Seems to be legit and working properly, but I have no idea if the apps on APKpure.com include malware or other nasty bits so download / install at your own risk.
Edit: They only had the older versions (1.1.3 and older) available at first, but they updated to latest version in 15 minutes after a request on their FB page.
very interesting...
Status from Paypal Claim on False Item: "After careful consideration, we're unable to decide this claim in your favour at this time. The item violates the PayPal Acceptable Use Policy. It's ineligible for PayPal Buyer Protection."
https://www.paypal.com/au/webapps/mpp/ua/acceptableuse-full -- "You may not use the PayPal service for activities that: relate to sales of (a) narcotics, steroids, certain controlled substances or other products that present a risk to consumer safety, (b) drug paraphernalia, (c) items that encourage, promote, facilitate or instruct others to engage in illegal activity, (d) items that promote hate, violence, racial intolerance, or the financial exploitation of a crime, (e) items that are considered obscene, (f) items that infringe or violate any copyright, trademark, right of publicity or privacy or any other proprietary right under the laws of any jurisdiction, (g) certain sexually oriented materials or services, (h) ammunition, firearms, or certain firearm parts or accessories, or (i) ,certain weapons or knives regulated under applicable law"
I really recommend the aftermarket screen and lid. It helps make the draw easier, and the "sandwich" screen helps make your flower compress tighter and burn smoother. Huge and noticeable difference for only $15.
I use a small Rubbermaid container like this: https://www.amazon.com/Rubbermaid-kkk-781147333731-Storage-Container/dp/B00N6KZMUO/ref=sr_1_2?crid=2X0Q6TV484I40&dchild=1&keywords=tiny+rubbermaid+containers+with+lids&qid=1631901454&sr=8-2
It is smellproof but since it's clear plastic it's not the most discreet option if someone were to see it. I live in a state where recreational use is legal, though, so I am not super worried about that.
I think this is the one I have it's got a nice little screw off top can fit maybe four bowls in there? Plus if she was going to be putting it in her purse she'll want a smell proof case for the Pax. Airtight Protective Case, Smell Proof Container, Fits Px 2 or Px 3, Removable Stash Containers https://www.amazon.com/dp/B01KQOAJKK/ref=cm_sw_r_apan_glt_fabc_A51E2Y0FVZWD7FKEJM87
https://www.amazon.co.uk/dp/B019SL4Q42/ref=cm_sw_r_cp_apa_fabc_J4XFGFYB74TE346GZZYR
This is the one I use. Nice and cheap too 👍 you can find them elsewhere if you're against using amazon. This was just so you could see the product
Seriously. BudKups! The only downside is that they are a trifle expensive for such small liddle bastards. Get a tamper too so that you can pack the weed as tight as you can. I grind my bud in a cheap coffee grinder. I grind it till it's like powder and then pack it with a tamper as tight as I can. I start my PAX3 on 2 and go to 4 when it's no longer producing on 2. Have a look at this: https://www.amazon.com/dp/B07HR1KPF9/ref=cm_sw_r_cp_apa_fabc_yU65FbZEXBBBR and this: https://www.amazon.com/dp/B07H8LYRRZ/ref=cm_sw_r_cp_apa_fabc_9V65FbTRMSQZ1
Nah won’t damage it but won’t clean as strong. Target usually has 91% and Amazon had 99%. I started ordering this from Amazon: Medical Grade Alcohol - No Methanol - No Foul Odor - Meets USP Specifications - Approved for Hand and Skin Application (32oz) (1 Quart (32oz)) https://www.amazon.com/dp/B0868R7JF6/ref=cm_sw_r_cp_api_fabc_hZSTFb2GPRCE8
this packing tool makes it way to easy to pack it tight :p
Consider using this whenever you aren’t using your pax Pax 2 Pax 3 End Bumper Caps Accessory Eliminate Odors and Provide Drop Protection PAX2 PAX3 https://www.amazon.com/dp/B01MEGAAIQ/ref=cm_sw_r_cp_api_i_ITkDFbJPFATS1
Nope, get the pax caps... Prescott Plastics 10 Pack: 3/4 Inch Round Black Vinyl End Cap, Cover Rubber Flexible Tube Pipe Marine Safety Tip 0.75" https://www.amazon.com/dp/B07QVZ11PG/ref=cm_sw_r_sms_apa_i_PEKVDbQWN1QR4
You're probably doing it right. But I'd recommend getting rid of the qtips and instead getting the pipe-cleaners. One order of these has lasted me years.
Download the Pax app that syncs with your Pax3. There are videos in the app on how to clean it.
That said, there will always be some smell and little bit of char/crust left over.
Weed is stinky and sticky. The stinkier and stickier, the better. So once you use the device, there will always be a liiiiiiiittle bit of residue left over.
No, it definitely will fix the problem. I was skeptical about it at first too, but it works very well. Been using it to get my Pax 1 mouthpiece unstuck for over 2 years now. Just apply some to the bottom stem of the mouthpiece, then insert the mouthpiece back into the pax. You then wanna click the mouthpiece in and out quickly a lot of times (like 20-30x). It will make a world of difference.
Here’s a link to the mouthpiece lube I own. Bought just one bottle over 2 years ago and I still use it regularly.
The pax has one of the larger ovens out there as well, so that one oven pack might last you all day if you take only a couple of tokes when you get out. I get 15-20 pulls out of a oven before I change it. I love my pax 3. Using it as I type this.
With the right type of case you can put it in your pocket and it shouldn't smell. While using it, that will depend more on the weed type. I was in a room with windows closed when I tried my friends herb, so outdoors will smell much less.
I don't think there is really a portable vape that is odorless while using it but that might just be my lack of knowledge of the other vapes. Someone else will have to comment on that.
I haven't tried any cases for the pax yet, I have read good things about the caps that go on the ends, people say it keeps the smell to a minimum. [https://delta3dstudios.com/pax2-caps-pair/](Pax caps from Delta3dstudios.com). And I have been looking at the one from Herb Guard, is a nice leather one but haven't pulled the trigger yet. [https://www.amazon.ca/Premium-Leather-Reducing-Technology-Discreet/dp/B0762W2LRK/ref=lp_15897416011_1_6?srs=15897416011&ie=UTF8&qid=1522391493&sr=8-6](Herb guard leather case)
I use the Delta caps and then also stash my pax in here (https://www.amazon.com/dp/B003G8GM0U/ref=asc_df_B003G8GM0U4823437/?tag=hyprod-20&creative=394997&creativeASIN=B003G8GM0U&linkCode=df0&hvadid=167133969347&hvpos=1o1&hvnetw=g&hvrand=9696794653028700209&hvpone=&hvp...).
This has become my travel case and I also fit 3 doob tubes in there with it perfectly.
Super important that you clean the stem of the mouth piece and the area between the mouthpiece and the draw stem (essentially, the area where the stem is inserted). If this area is not cleaned thoroughly, the mechanism for the mouthpiece will become gunked up, the mouthpiece will get stuck, and the device will have difficulty recognizing when the mouthpiece is in the on or off position.
Stronly recommend this tool for cleaning, it has a few different sized wire brushes that will help you keep the mouthpiece, draw path, oven AND the area described above all nice and clean: https://www.amazon.com/gp/product/B003YCGWBC/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER.
GL!
or the screw-top model. I got that one and like it.
Beware of some of the skins. I put one on mine and immediately had charging issues. I modified the skin to wrap just around each side a bit. It charges perfectly now. This is the skin I bought. https://www.amazon.com/Starry-Night-decal-PAX2-vaporizers/dp/B00X96LHSG/ref=sr_1_1?ie=UTF8&qid=1472838218&sr=8-1&keywords=starry+night+pax+2+skin
Have a stoned grinding session every few days. You can store a couple ovens worth in lip balm containers. Edit: item description has the words "high" and "pot." We know what they're for.
I dont know if im the only one that feels no issue. I use a combination of two things. 1) a window or smoke buddy 2) this: Pax 2 Smell-proof Hard Plastic Case; Pocket-carry with Flip-top for Easy Access (Black) By Skunkcase https://www.amazon.com/dp/B01BFDN80Y/ref=cm_sw_r_cp_api_5.EuxbGS814W8
When the session is over I just put it back in its home. Sacrifice a little portability for peace of mind IMO
Grind an oven or two's worth and put them in these.
Pax 1 user here. Someone on this subreddit suggested this case which I've been using for a little over a year now. Just throw it in right after you're done and forget about it. It's not perfect but it makes a huge difference.
Going forward, get some 6" wooden qtip type swaps. They are great if you want a quick clean without using a pipe cleaner. Push it down backwards to remove the screen, then use the cotton end to wipe it clean.
http://www.amazon.com/IBrn-Distributors-Cotton-Tipped-Applicators/dp/B000L196TE/
I have been using this shit for over a year. I havn't even put a dent in it. Literally exactly what you need.
if you look on amazon they have multiple color options they're around 10 bucks just search for pelican 1010, here's a link to the one i bought but i think i paid 10 bucks
I too have a Pax 2 (FUCK YEA) and am using it indoors with parents who may walk in. YES, the smell is apparent in a closed room with a candle. Much less than smoking, but still there. Here's some tips.
Open a window as much as possible, even if it's just when you're hitting the Pax (ideally some time after to keep airflow moving).
Invest in a Sploof. I recommend the Smoke Buddy Mega (very smooth)
Keep those candles going after you have had your session. Can only help.
Consider caps like these to keep on the Pax at all times when not in use. Unless you already keep it in an airtight container.
Hope this helped, keep up the good work.
I bought this cleaning set. It comes with a metal tool that you can use to push the screen out and scrape the screen/oven clean when it gets really gummed up. For the airway, I use a pipe cleaner soaked in a bit of Isopropyl alcohol like other have suggested.
I've found that putting a quarter or something similar in your grinder and then moving it from side to side helps to grind down the herbs and push more kief through the screen. You can also get a "finishing grinder" like this one.
Also, make sure that you'll filling the oven up to the top or using a pipe screen to push the herbs down against the bottom of the oven to get the most out of it.
Let me know how it goes! If you're shopping for essential oil deals, here's my favorite one!
You can also buy an oil diffuser which can freshen your air almost instantly and it works a lot stronger than a candle, plus it's aromatherapy so it's perfect to breathe that stuff and mask the vape cloud smell.
I use 100% therapy grade essential oils. My favorite mix to do is lemongrass & peppermint. I get light amounts of oil from the cap or the edge of where it pours out onto one side of the Q-Tip and I spread evenly both underneath the mouthpiece and the top of the PAX where the button is exposed. Then I use the dry side of the Q-Tip to wipe off any excess oil that didn't dry up quickly. This is 100% safe to do and it is beneficial to your health to inhale these oils. It also enhances your session because of the aromatherapy benefits it gives you. Benefits of Peppermint essential oil gives a cooling sensation and has a calming effect on the body. It also has antimicrobial properties so it can help freshen bad breath and soothe digestive issues. Lemongrass oils scent makes it a valuable aroma therapeutic oil. Its clean and calming aroma helps relieve stress, anxiety, irritability, and insomnia, and prevent drowsiness. Try it out! It's a great thing to do and it's beneficial!
If you're shopping for essential oil deals, here's my favorite one! http://www.amazon.com/gp/product/B005IHJ556?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
You can also buy an oil diffuser which can freshen your air almost instantly and it works a lot stronger than a candle, plus it's aromatherapy so it's perfect to breathe that stuff and mask the vape cloud smell. My aunts (both doctors) promised Orange, Lemongrass, Lavender, Eucalyptus, & Peppermint are completely safe as long as they are 100% essential oil extracts that are therapy grade. The other ones (such as vanilla) you would have to make sure they are 100% essential extracts and if they are suitable for aromatherapy.
Yea I've been using it wrapped and the color does change back to purple when I pull from it when it has turned green. I wanted something that would protect my pax from unnecessary scratches while maintaining concealability.
http://www.amazon.com/Skin-2-Win-Black-Mamba-Protective-Sticker/dp/B0101QBBKK
This. http://www.amazon.com/gp/product/B001CCZF6E
I read this before moving into my new place because smell was a concern. I don't remember who posted this originally so I can't credit them but thanks dude if you're reading. I hate the smell that clings to everything even if it's not as bad with a PAX so I had my doubts. A smoke buddy will absolutely help for the smell during use but I don't bother with it.
Immediately after use I throw it in that case and usually end up forgetting about it. Opening the case a few hours after is a huge reminder of what it's holding back. I know this isn't 100% sealed but it still works very well. This also doubles as a good case to keep your PAX in great shape. Fits in a pocket. Awkward but fits.
Edit: I have a gen 1 so measure before you buy.
I got it at a local head shop but here it is on the Amazon...
I can't leave mine out to charge so I charge it in a pelican case with a battery pack> I've been trying to get someone to 3d print a cradle for me so it aligns perfectly every time. For now I use a velcro strap and it works pretty good. its one of these http://www.amazon.com/VELCRO-Brand-ONE-WRAP-Self-Gripping-Reusable/dp/B001E1Y5O6
I'm sorry, I should have been more clear. I meant that I use the MFLB finishing grinder to grind the flowers for my PAX 1. The MFLB finishing grinder is similar to a cheese grater, and grinds the buds to a VERY fine grade that isn't achievable with a normal 2 or 4 piece grinder. Highly recommended for any PAX user.
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
yeah, I ended up using it twice. It still functions fine and temp is good, it's just it feels like the fuzziness is killing the drag and not allowing smoke to come out well
just for opinion, do you think this product is good for Pax?
http://www.amazon.com/Bundles-Zen-Pipe-Cleaners-Bristle/dp/B000W5R6UA
Its not exactly the coolest accessory, but an important one nonetheless. For cleaning purposes this works great. It has small brushes for the mouthpiece that you can use instead of those disposable dental brushes like most people suggest, and larger bruses for the vapor path.
On Amazon, the Pelican 1120 is currently $24.48. The interior dimensions are 7.46" x 4.96" x 3.33". The foam comes included and is perforated for easy customization. Other accessories not included.
Doob Tube and Sandwich Pack - Keep your grounds in the tube, then spin the tube lightly to pour it out. Use the Pusher to pack down until you have enough. Put the lid on and Pax!
Yeah its awesome ! I just dump my AVB in one end and I got my bud in the other I like the natural look of it and its real wood holds 8 ounces in each side
Link: http://www.amazon.com/Paula-Deen-Signature-Pantryware-2-Compartment/dp/B002O4SIJK
FYI, they already make a silicone type sleeve. Here. I prefer the feel of a naked PAX myself, but I rarely use mine out of the house.
yeah, using Autodesk Steckbook and Gif Maker .