What are /r/snowboarding's favorite Products & Services?

From 3.5 billion Reddit comments

I'm not going to pretend to know if you assessed the situation correctly but this:

> This is a run just outside of the main pistes

and this:

> My friend in the orange has been riding this area his entire life, and assured me

Are two huge reasons that people die in the backcountry. If you're off piste like this everyone in your group should have a beacon, probe, and shovel at minimum. If this is a thing you do often or want to do more in the future, then I would recommend at least reading a book like this.

To me, diffusion of responsibility and thinking "well he knows what he's doing and is ok with this" is not something I want to bet my safety on. Gaining knowledge for yourself so that you can make your own intelligent decisions is the best way to go.

Hopefully this didn't come across as a lecture, just trying to provide the right information. Like I said, your friends decision could have been fine, but if you read up on it a bit you'll be able to at least know what to look for and make a judgement of your own next time you end up in this situation.

If nothing else, at least remember this for judging if something is steep enough to slide.

Kinco 901, or 901T if you prefer mittens. $20 a pair and last me an entire season (and I will hit at least 210 days this season)

https://www.amazon.com/KINCO-Pigskin-Leather-HeatKeep-Thermal/dp/B01AT2XQ18/

You shouldn't use blue loc-tite. There is a reason why the plastic base plates that come with bindings have stickers warning against the use of Loctite.

Blue loctite will cause a chemical reaction with the plastic, literally melting the baseplate as if it was on fire. You can google the pictures for yourself.

I am sure there are people on this sub that have had success using it, but I wouldn't risk getting any of it on plastic.

The blue thread coating that comes with new binding hardware is not the same as blue loctite.

I highly recommend using Vibratite VC3. I have been using it for years and since I have started using it, I have never had issues with my hardware loosening. It helps to absorb the vibrations and chatter that loosen the threads. It is safe for plastic.

If that doesn't work, then you will proably need to get new binding hardware. You can pick up a set for less than $10, or try the manufacturer of your binding and see if they will send you some for free.

I have a video of myself putting on the same tbar clinic at which I believe is the exact same lift... the Tbar between peak 7 and peak 8 at Breck.

https://vimeo.com/90144366#t=4m8s

The thing is I've ridden quite a few tbars before this at Copper and was fine. This one was brutal.

I'm no avalanche expert, but anyone riding in Tyrol in the foreseeable future, please, be extra, extra careful. Check avalanche reports frequently. We got a danger level of 4 in large parts of the state (including St. Anton), possibly a 5 coming up soon:

>4 – High

>Very critical avalanche situation

>Natural and often very large avalanches are likely. Avalanches can easily be triggered on many steep slopes. Remote triggering is typical. Whumpf sounds and shooting cracks occur frequently.

>Recommendations for backcountry recreationists:
>Stay on moderately steep terrain. Watch out below run out zones of large avalanches. Inexperienced persons should remain on open ski runs and trails. Forecast only on a few days throughout the winter.

>Around 10 % of avalanche fatalities.

Local news are filled with stories of mountain rescue digging tourists out of avalanches, in many cases too late to save their lifes. A 16 year old Australian died in St. Anton on Thursday.

I honestly urge anyone who reads this to just stay inbounds while snowboarding atm.
If you have to go backcountry riding, know what you're doing and be decked out in full avalanche gear. If you see a warning sign or a barrier, it's there for a reason. Respect it.
Get the official emergency app (I think it should come in English?), which allows you to send your GPS location to mountain rescue at the press of a button.

Stay safe and shred another day ✌

I'm in the Pacific Northwest and I have a hard time seeing this prediction because of the way the bees are behaving. Several people I've talked to have mentioned, and I have noticed, that the bees in this area are starting to nest in the ground as we come toward fall/winter instead of nesting in the trees. In the past this has always been much more common in years when the winter is colder than usual. The people in this area tend to notice things like this because the area is primarily farmland. Could be different for other areas of the PNW but that's just what we've been observing here.

Blackstrap all the way! The mouth guard is super easy to move up and down, and I've never had any issues with fog. Here's an Amazon link (although you may be able to find them cheaper): https://www.amazon.com/BlackStrap-BS-H-BLK-p-Blackstrap-Balaclava-Hood/dp/B00AASPZ84?th=1&psc=1

MDP - AMP

The rate of progression is just staggering, when you look back at where we came from and what is considered to be pushing the limits of what is capable with faces that are still relevant today.

you do NOT need a new set up.

I've worked in the industry for a long time, including at a shop that does repairs.

If the hole reaches the base, you'll need to take it into a shop.

If it doesn't, then you can potentially fix it yourself but a shop wouldn't be a bad idea anyway.

To fix yourself, check out an online tutorial about how to P-Tex a board such as this one: http://www.ehow.com/how_118076_repair-gouged-ski.html

EDIT: I agree with spacegrab, repair isn't that necessary. My advice is just if you want to.

Got to test M2, didn't have an issue with them. I would say M2 since its easy to change lenses, larger view, and nice fit. Here is anon. pro rider Bode doing some strange product testing, proving the strength of the magnets

The video is 56 seconds of torstein and a couple friends cruising the park in vail, probably during the US Open. They're not filming some special movie, they're just having some fun with with a camera guy tagging along.

Unless you're going to jay (and even then maybe not) I would say no. Jay's got a base of 30-50" and even then you've got 4 more 60-75degree days before then. Killington might be a bit better, but I was out friday and it made me decide to pack the season up. All of the resorts are warning about unmarked bare spots.

Also this was ground conditions @ MT. Snow on Friday, which was before 2 more 60+ days. https://vimeo.com/38671920 (skip around, its pretty boring, like the lift itself is).

Can get some decent crash pants cheap on Amazon. I wear these ones. I've taken some hard falls and they have saved my ass 😜 https://www.google.ca/url?sa=t&source=web&rct=j&url=https://www.amazon.com/Wolfbike-Padded-Protective-Compression-Shorts/dp/B07CQ3MHSY&ved=2ahUKEwiUyf7F9ZLuAhW0HzQIHfCOAAQQFjACegQIDBAC&usg=AOvVaw1Je1Xmne7OVRuTjUgYdwrb

I don't think I've bought anything off of Youtube either, or at least I don't remember. It's also available for sale on Amazon too - https://www.amazon.com/Art-Flight/dp/B00OKSQQ56

It's probably available somewhere for free, but a quick search doesn't turn up much.

Also crash pants / pads.

I also just started, Friday was my first time on a snowboard. Loved it!

I got this of amazon for like $20....https://www.amazon.com/JBM-Adjustable-Protective-Multi-sports-Purpose/dp/B014UO0EGG/ref=sr_1_4?ie=UTF8&qid=1483286455&sr=8-4&keywords=crash+pants

Helps protect your tailbone/butt when you fall square on it.....which you will probably do quite a few times. I highly recommend, your non-hurt tail bone will thank you!

My son’s first board was retired when he grew out of it because the bottom was pretty trashed. I surprised him by making a shelf out of it in his bedroom. These brackets from amazon worked really well, and you can barely see them...

https://www.amazon.com/gp/product/B00V5WKJG2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I don't know about CA - but they are available on amazon. If I were you, I'd go to a "boot doctor", I've had some amazing results after talking with experts while having my gear and feet present. Its important to think about all the issues beforehand and be as forthcoming as possible. Go to a mt that may have a place on site, which will provide you with the ability to test out modifications and report back. Sometimes the guys don't even ask for money, just be nice and throw them a tip. I've had J's and heel lifts put in that have changed my days and riding experiences completely. They can even help you understand how your bindings and stance can help with similar issues.

Best of luck.

Real talk, if you have to ask this question to randos on the internet, you should almost certainly not be in the backcountry this year. Avy risk and trail crowding will be at an all-time high because of the number of first-timers thinking exactly the same as you. If you don't already have potential partners to show you the ropes, now is not the time to be dabbling.

I would get setup for future seasons.

• Rent a splitboard and take an Intro to Splitboarding course under professional supervision.
• Find and learn how to read your local avalanche forecast. Read Staying Alive in Avalanche Terrain.
• Sign up for your regional equivalent of Avy 1 (AIARE Level 1 in the US).
• Ride with a small compass and test if you can feel out which aspect of the mountain you're on.

But I wouldn't plan on consistently getting out into the field unless you can either afford multiple guided trips or find experienced partners willing to mentor you.

Not sure where are you located but CBC website has full runs. In the bottom you can select heat 1 or 2 and fast forward or replay.

If you're outside of Canada (like myself) then use a proxy (I use TunnelBear).

What about getting something like this to stand on while your working?

https://www.amazon.com/Revolution-Balance-Board-Trainer-Green/dp/B013YPIVB2/ref=sr_1_1_sspa?ie=UTF8&qid=1537808445&sr=8-1-spons&keywords=snowboard+balance+bar&psc=1

I don't have any experience with Anker, but I did manage to get wireless music for $50 bucks. this + this. I found the in-helmet music to be much better quality and just less painful on my ears (earbuds pressing into your ears from the helmet hurts)

I use Ski Tracks. It does pretty well with your stats, but it doesnt have the ability to show where other people are.

https://play.google.com/store/apps/details?id=com.corecoders.skitracks&hl=en

actually it was fine. I don't know how they do it but their groomers killed it this year; every trail was open on closing day, and the big park (Timberline) was even in really good shape.

here's a run from the top of Quarter Mile, around Mansion Run and through Timberline.

SEATTLE!!! (I think lol)

Hey everyone a dear friend and snowboarder Lemi took a bad spill at the Gremlinz Games on Sunday and needs some help. You might know him from his series Life of Lemi or as owner of the now defunct Strapdup.com. Lemi was Heli-vaced out of ASI to Reno with a head injury. Lemi is the kindest, most humble guy around and all he cares about is spreading love. Guys please send Lemi your love and support in his time of need! Follow the link here to donate to his hospital fund. Every little bit helps!

Hello, I'm a bot! The movie you linked is called The Crash Reel, here are some Trailers

Yeah it would not be enjoyable by any means. Bring a sturdy pair of shell pants and an ice ax or trekking poles. If you find a patch of decent snow, you can always glissade (Just ignore the bit about snowshoes).

I took an alumni ski pole, cut it to the length that I wanted. Then took a dremel and cut the sides if the pole about an inch towards the handle, took a hammer and made it flat. Then take a metal drill bit and drilled a 1/4" hole then attached the following tripod mount to the pole. Have been using this for a couple years now and haven't had any problems.

Tripod mount: Fotodiox GT-Tripod-Black GoTough Camera Tripod Adapter with Black Aluminum Metal Tripod Mount for GoPro HD Hero Cameras https://www.amazon.com/dp/B00F8JHPLK/ref=cm_sw_r_awd_u3keub04KPEVC

People say that they can't get it tight enough, I always carry a snowboard tool with me, and use that to get the screw to hold the camera right enough. People just don't use enough common sense.

I'll post some pictures if you would like, let me know

Ya man let me know if you run across any new Nomis streetwear or even outerwear for that matter.
Iv recently discovered Nomis and i love everything about that brand but i can hardly find it anywhere online, not even to mention any local shops. It looks like they didn't even drop a 14/15 line this year.
Im watching there website like a hawk, and nothing yet.
I did find this tho, just not anywhere to buy it.

I have, best prices on the net it seems, and here's some coupons, all the green ones worked for me (can only use one though) http://www.retailmenot.com/view/allsportprotection.com

>Where can I find this year's board, before the season has even started at like, 99% of Northern Hemisphere ski resorts, for less than MSRP?

FTFY.

You won't, unless you've got a proform or someone at your local shop owes you a favor. So, you won't, because if either of those conditions were true, you wouldn't be asking here! From the looks of it, if you can find one for $500 CAD you're getting a deal already. It retails at I think $459 USD, and based on today's exchange rates, that's about $600 CAD.

I've done that as well. If you find a price on hotels.com or Hotel Tonight that works for you, call them directly and they will usually beat it (since they'd have to pay those services a fee).

I skied Crystal on Saturday and don't think I touched a groomer all day, except as needed to get back to the chair.

Anything in the sun (North and East aspects) was skiing super soft. Trees were firm, but will soften nicely too, once we stop freezing-hard at night.

I swear by these goggles for cost effectiveness. I've had em for 2 or 3 years and think they're great, and being able to pop out the lenses if you get snow in them shits is a lifesaver. Added benefit of a few different color selections and the ability to wear glasses under them is nice too.

I have pretty strong OCD and it affects a lot of things like this in my life. So I look closely at it as I rest it and see the slight change and then think about it too much.

I decided to pick up this anyway because it takes up less space and will probably ease my mind a bit more:
https://www.amazon.com/gp/product/B00IZH9MLI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Heyooooo I'm heading out to Niseko in late Feb.

This one is recent: https://www.youtube.com/watch?v=tXpXHoDKL64

My favorite older films from Japan were made by Heart Films. Unfortunately they're regionlocked DVDs from what I remember so I had to use my computer to play them.

Holy shit it's only $1.95 on Amazon. http://www.amazon.com/2009-Tadashi-Fuse-Volume-Heart-Films/dp/B001G7JUSO

Don't do that. Just buy this, it's $12.50 on amazon prime:

https://www.amazon.com/ski-snowboard-wax-kit-Hertel/dp/B008UTO068/

Grab an old crappy clothes iron (that you don't plan on using on clothes again) on super low heat. See youtube for visual instructions.

Hey! Thanks so much for your quick and extremely informative reply.

I'll definitely spend more time on my legs and on the exercise balls in the coming weeks.

You're right, they do have a board, boots, bindings, helmets and goggles, so the only things I need myself are... the rest of the things you mentioned.

Doing my shopping on Amazon rn (I'm kind of excited), mind if I ask for a bit more help?

Like, would a jacket like this be alright?

https://www.amazon.de/Ultrasport-Herren-Softshelljacke-Everest-Schwarz/dp/B00FXNI33A/ref=sr_1_2?s=sports&rps=1&ie=UTF8&qid=1484340550&sr=1-2&keywords=snowboardjacke&th=1&psc=1

And some of the snowboarding trousers have straps, are they really necessary?

Again, thanks!!

I've started decorating my board with a sticker for every place I've ridden. As part of that, I put down this clear sheet over the top surface, and then put the stickers on that. The theory is that I can either "reset" the board or pull the stickers off and make art out of them. It works pretty well, although the top coat on the Rossignol board that I started with is super cheap and gets pulled up.

https://www.amazon.com/gp/product/B07FDL8R1R/

A cheap custom option would be to do a 3 layer sandwich:

1. A layer of the vinyl
2. Print out your artwork on Rite in the Rain waterproof paper. Cut to shape. Spray the back with adhesive spray, and attach to the board.
3. Seal it in with another layer of vinyl.

Of course, you should leave the bottom of your board as is.

I use these: Alta Wireless Bluetooth Helmet Drop in Headphones https://www.amazon.com/dp/B07H7X814B/ref=cm_sw_r_cp_api_i_p0LFFbG4TVGV2 The sound isn’t necessarily the best, but I can hear music and if I’m not blasting them I can hear people around me as well

Age is nowhere as much of a problem for just a board as long as it’s not ancient (90s and earlier have different binding screw patterns that you’ll need an adapter for) and it’s in decent shape. One of the best boards I’ve ever ridden was a 2005 ride decade that I bought for $25 because the seller didn’t know how much the attached Union bindings were worth.

If the board ends up being okay then you might be able to get away with a set of bindings like this No guarantees they’re any good but at a glance they have better strap technology than other generic bindings

I have a subscription to Blockless which I recommend to everyone. It is 5 bucks a month but it's much more reliable and higher quality as a result. You can pick from a few different locations to appear from including Canada or the US. So I don't bother paying for cable tv any more.

There's a 7 day free trial available now.

I started using TraceSnow a few weeks back and love it. It's free, does a decent job of GPS tracking, and even notes jumps including height and distance.

Hopefully you meet up and ride with someone, I am doing the same thing but at Snowbird in a few weeks. A user here also made an app called <strong>Peaksly</strong> Check it out, not sure how many people would be on it yet but maybe worth a download.

My dad uses Shipsticks/Shipskis because he doesn't like dealing with the bag in the airport. But for driving you can get a rack for around that price Rhino Rack. Also, check Craigslist/FB marketplace people get rid of cargo boxes all the time.

merry christmas $80 (usually $270) new smith mag xl goggles that come with a yellow low light lens that would work for night riding.

Are there any sites out there that have a head-to-head comparison tool for snowboarding gear?

I think it'd be really useful to have something similar to what sites like this one has for phones but for boards and boots. The closest thing I've found is The Good Ride which does spec charts and performance ratings (is that site good, btw? I wasn't familiar with it), but doesn't do head to head comparisons.

I just filmed something for the first time (plus it's only my second snowboarding trip). I think I did an alright job - reckon you can give me some feedback? The one big thing I know needs work is the monotonous camera angle. I tried to mix it up a bit, but yeah.

I've got 4 boards now; 1. 2008/9 Ride Control 158, I got it with Ride bindings, which I've gotten rid of now, so no binders on it. 2. Morrow Indy 166, had the Ride bindings on it, then I went to SnowPro binders and hardboots, and it likes the stiffer interface. 3. Nidecker GS 170, just picked this up last seaon, only ridden a few times 4. Jones Mtn Twin 158, got this for a trip to Whistler in April, pretty good board, not as much edge hold as I would have liked, I would have gotten a hovercraft, but I don't see much powder at Tremblant, stilla fun board though Boots; 1. First ones were Burton somethings, soft, not bad, now replaced. 2. Ride Insano's, more support, but I could use a bit smaller size I think by 5mm 3. Upz RC-10 hardboots's in blue, blue is the faster colour despite what people with the green ones say. Bindings: 1. Ride LX, not a bad binding, progressed out of it after a few years 2. Rossignol Cuda V2's, good softboot binding, it's a medium stiff, with good response 3. Raichle X-Bone standard, seems to be quite flexy, I prefer the entry and exit of the next ones 4. Sno Pro Race step-in's, very easy to get in and out of, I find stepping forward a more natural motion than stepping back in other hardboot bindings

You can see the UPZ's and Sno Pro's at the 42 second mark in this video, I was riding the Morrow Indy 166: https://vimeo.com/89837443

Not the other person who replied, but I had the same worry last year going to Breckenridge. I drank a lot of water every day for the week before and tried this: Acclimate

It doesn't taste too good or too bad, and I'm not sure if it's why I didn't get altitude sickness, but all worked out in the end. Hopefully it does for you too.

https://maps.google.com/maps?q=60.795699,-149.200474&amp;ie=UTF8&amp;hl=en&amp;view=map&amp;ftid=0x56c8778be44b760f:0xcf78644f5f678062&amp;ftt=289&amp;geocode=FcjUnwMdBKob9w&amp;split=0&amp;sll=60.805703,-149.180091&amp;sspn=0.024747,0.047336&amp;...

Its a trail in Turnagain, about an hour south of Anchorage, ^thats the parking lot to start from^

https://maps.google.com/maps?q=60.795699,-149.200474&amp;ie=UTF8&amp;hl=en&amp;view=map&amp;ftid=0x56c8778be44b760f:0xcf78644f5f678062&amp;ftt=289&amp;geocode=FcjUnwMdBKob9w&amp;split=0&amp;sll=60.805703,-149.180091&amp;sspn=0.024747,0.047336&amp;...

Its in Turnagain about an hour outside Anchorage, its still quite a hike and the the snow is pretty hard and windblown, so if its to much trouble to bring your board you might want to wait, I just really enjoy the hike itself too.

For real, I had a very bad fall on my tail bone a few years ago and couldn’t move for a couple of days. Since then I bought some protection for my butt.

Something like this

https://www.amazon.com/Protective-Padded-Compression-Snowboard-Tailbone/dp/B08F9RWWGF

I love these boots so far, I can't speak on them too much as I've only worn them to get a feel for the board in my office. I will say the size I got is super snug (size 9 US) and fits perfect. I did a couple hops on carpet and stress tested the board and my feet don't move around at all. Heels are locked in and feel great. The boots have a fleece lining that is really soft and they're also incredibly light which is surprising for how big/compact they look. I'm in the military and my smaller military boots are significantly heavier. The only downside about the ones I purchased is that I didn't go with a coiler lacing system so tightening the boots take slightly longer, but it saved me about 50$ so I don't mind the sacrifice.

BURTON Moto Mens Snowboard Boots:

https://www.amazon.com/dp/B079RKTDFF?psc=1&amp;ref=ppx\_pop\_dt\_b\_asin\_title

It should definitely be much better next week. There are no lines at all mid week. I would keep an eye on the weather, looks like we might get some snow late next week. https://www.wunderground.com/forecast/us/nh/bartlett

I use cheap dry sacks. If you put your board in wet, or with some snow or ice left on it, the rest of your gear stays dry. You can also seal them with air inside, which provides some cushion. Prior to using the dry sacks, I've had a helmet and goggles get damaged in transit.

I wear my thin mountain bike knee pads pretty much all the time snowboarding. I did it at first on a few icy days that I was gonna be hitting mostly groomers and realized I could barely feel them but it made me a lot less worried of going down on my knees if I needed to. These are the ones I got. https://www.amazon.com/gp/product/B07N1T788T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1

I have a pair of these. I like them as pads a lot. The only the thing I don’t like is that to put them on or off, you need to take your boots off. I don’t like wearing them all of the time. I really only use them on ice or in the park.

So I wear a compression sleeve over my knee. Its not going to help with kneeling if thats your issue but for riding my knees feel so much better riding with it than without.

https://www.amazon.com/NEENCA-Professional-Compression-Stabilizers-Arthritis/dp/B09NDGCX2Q

Unless the place you're staying has a drying room, it's going to be tough to keep things dry enough to have just one of everything for 7 straight days of riding. You'll want 2 or 3 pairs of socks and gloves, 2 base layers, potentially a 2nd bib and jacket. Most importantly, if there's no boot dryer, you'll need your own, i use this one for travel:

DryGuy Travel Dry DX Boot Dryer... https://www.amazon.com/dp/B010A5JBPO?ref=ppx_pop_mob_ap_share

Have fun and welcome to NA!

You'll need a pair of these - https://www.amazon.com/Bodyprox-Protective-Snowboard-Protection-Tailbone/dp/B0996V5MG5

Enjoy the snow!

dear jeebus do not use a speaker.

i use the chips 3.0 (removed tracking parameters from URI), and previously the chips 2.0, in my helmet.

when i was younger, i just wore a beanie and skullcandy skullcrushers (because what teenager used helmets a decade or two ago, right?).

Get these. You can take out all the pads for comfort, just leave in the tailbone pad. You will not have any tailbone pain. Otherwise, prepare to not walk for a day or two after your first day on the mountain. https://www.amazon.com/gp/product/B00IJJERQW/

On days when not many people are around I use these cheap yet sturdy water resistant earbuds. On busy days or more dangerous trails I only keep one or no buds in.

iPhone chest/head mount

I’d rather get a used GoPro or Amazon/Chinese brand than live with having an iPhone strapped to my head…

I have had the best luck with the Dry Guy brand when it comes to portable ones. They at least have a fan to move some air and don't get warm enough to mess with heat molding.

FWIW, I got these:

https://www.amazon.com/BE-Headwear-Bluetooth-Headphones-Compatible/dp/B013HSXKQ2

The audio quality is probably a bit lower than the $110 chips, but they work, they don't sound like absolute trash, and the battery lasts all day. Had mine two seasons, still going strong.

yes. can get them at most snowboard stores, or if you have one a burton shop. since it's summer you could certainly order.

&#x200B;

https://www.amazon.com/Burton-M6-Channel-Replacement-Hardware/dp/B00U48M0CO

&#x200B;

Anytime man. hope it works out and she has a blast.

https://smile.amazon.com/MUSICOZY-Headphones-Bluetooth-Headband-Ultra-Thin/dp/B09K4WZGVD/ref=mp_s_a_1_5?crid=AETUJ4JXDYBP&amp;keywords=Bluetooth+headband&amp;qid=1655493718&amp;sprefix=bluetooth+headband%2Caps%2C154&amp;sr=8-5

I use something like this You can move the speakers around a bit, helps w comfort and volume

Outdoor tech Chips 2.0. Decent sound, easy to use with gloves on. They fit in most new headphones, and be because they aren't in ear, you can still hear ambient sound around you.

https://www.amazon.ca/Outdoor-Tech-Bluetooth-Walkie-Talkie-OT0052/dp/B01KZSRB1W/ref=asc_df_B01KZSRB1W/?tag=googlemobshop-20&amp;linkCode=df0&amp;hvadid=293055557903&amp;hvpos=&amp;hvnetw=g&amp;hvrand=10926019703991645463&amp;hvpone=&amp;hvptwo=&am...

And some knockoffs can be had for less than half, if cost is a barrier for anyone:

https://www.amazon.com/BE-Headwear-Bluetooth-Headphones-Compatible/dp/B013HSXKQ2/ref=sr_1_8?crid=3I4RWP6LRZZ5N&amp;keywords=snowboard+bluetooth+helmet+speakers&amp;qid=1655489963&amp;sprefix=snowboard+bluetooth+helmet+speakers%2Caps%2C75&amp;sr=8-8

I'm sure the OT Chips are better, but the point is to have some tunes, not expecting studio quality playback.

They're not that expensive. Now is the time, in summer. Head over to Evo.com and look for helmets on sale with this listed in the feature list:

>Compatible with Outdoor Tech™ Audio Systems, Sold Separately

Then get yourself a pair of these to put in the helmet:

https://www.amazon.com/BE-Headwear-Bluetooth-Headphones-Compatible/dp/B013HSXKQ2/ref=sr_1_8?crid=3I4RWP6LRZZ5N&amp;keywords=snowboard+bluetooth+helmet+speakers&amp;qid=1655489963&amp;sprefix=snowboard+bluetooth+helmet+speakers%2Caps%2C75&amp;sr=8-8

Battery lasts all day. Even at their loudest you can still hear things going on around you, and you don't need them turned all the way up anyway. And because they are zippered into the helmet shell, they don't hard seal against your ears so you don't get audio isolation like you would with other headphones, especially in-ear.

Having hearing for awareness on the slopes is a nice bonus, but people who are HoH or deaf and snowboard JUST FINE, so there's no reason you can't do so safely with music in your ears.

Frankly, anyone who says that listening to music would make them less safe on the slopes is just admitting to me they don't look around or check their blind spots enough.

I purchased these for $20. I can either hang 1 board on 2 hooks or put two boards back to back on 2 hooks. The one board looks cleaner. They lean against the wall at 45 degree angle (less angle with two boards). With my kids boards, I have 5 boards in total.

Note: I took an old bike tube to condom over the hanger to protect the board edges.

https://www.amazon.com/gp/product/B07W9F11NP/ref=ppx\_yo\_dt\_b\_asin\_image\_o00\_s00?ie=UTF8&amp;psc=1

Thanks for chiming in, you're a legend!

I appreciate all the insight. It seems like I should go with the Everyday Red. I did a side-by-side today and see what you mean about the amber base. If anything it seemed to just make things more vibrant.

• I had a peek at the Giro Axis. Would the Vivid Ember/Vivd Infrared be comparable to the Everyday Red?
• Any concerns about the sweat I mentioned with the Squad?
• I think you mentioned the Squad XL's have a filtered second lens? If there were no other differences between that and the larger size, it seems worth considering over the non-XL's

So I recently picked up this edge tuning kit to sharpen and maintain my board. I’ve watched too many videos and read too many (often contradicting) articles. I overall understand how to do it but one main thing I’m confused about is almost all the videos and articles say to sharpen tip to tail but the file I bought is directional. So one way will be tip to tail and the other will be tail to tip if I’m following the file direction. So I guess do I just ignore the tip to tail advice? Any help or tips is appreciated!

I have these ones https://www.amazon.com/Kinco-Premium-Leather-Nikwax-Waterproof/dp/B017V0Y9OY/ref=mp_s_a_1_4?crid=1VXDAOX53NTD3&amp;keywords=kinco+mittens+men&amp;qid=1645199095&amp;sprefix=kinko+mi%2Caps%2C75&amp;sr=8-4

Should be pretty similar, just a different style I think.

Sick. I'm sold.

Gonna pick up a pair.

These? https://www.amazon.com/Kinco-Premium-Pigskin-Heatkeep-Insulation/dp/B08JMF72JG/ref=mp_s_a_1_4?adgrpid=70001411891&amp;gclid=CjwKCAiAgbiQBhAHEiwAuQ6Bkp7gHz8z-J3qj21OenQ1ai8E6m1VYeYVsC16to7SFyRu2nAn3LBKJRoC3iEQAvD_BwE&amp;hvadid=580775284279&amp;hvd...

I also have a big ass head with a Smith helmet and I swear by these (link below). I keep my earpads on my helmet tho because it's the kind of stuff used under snowmobile helmet.

https://www.amazon.ca/dp/B00PJV02QM/ref=cm_sw_r_awdo_navT_g_WVVNNK1VPM63R5VMVSVE

Going to buy a selfie stick for iphone 13 pro max. Dont have the cash for a gopro

Would love to hear any recommendations

Thx!

Might go with this:

SANDMARC Pole https://www.amazon.com/dp/B089F781BL/ref=cm_sw_r_cp_api_glt_i_ABTTKADJGGPYE1H8W75G

Yeah that’ll get the job done. This is the kit I have, came with the iron and definitely gets the job done easily. Think I’ve used everything including the ptex in this kit over the last two years. https://www.amazon.com/dp/B01M59DAJO/ref=cm_sw_r_cp_api_glt_i_5901FMWHK4AHVT0HKR8N

FRDM EMERGE Cold Weather Snow Mitt Waterproof Windproof Leather Convertible Snowboard Ski Snowmobile, For Men & Women https://www.amazon.com/dp/B08FQWSSWJ/ref=cm_sw_r_cp_api_glt_i_PPM8FGR3WWEYJZQ209EX?psc=1

I have these and love them. Also great company they gave me free liner gloves when I needed a different size!

I have mittens matching your exact description and I love them, pricey thowhen I got them they were much cheaper, I can say confidently that this company is great, they got back to me promptly when I needed a different size and even sent me a pair of liner gloves for free!

Do you prefer a full zip shell or anorak if you had to choose? What are the pros/cons of each in your opinion?

I am getting more into snowboarding and want a one time buy jacket. I recently ordered a few different shell jackets on amazon and have a window to return them. I wore the full zip snowboarding last Saturday and really liked it. (The anorak came in late, so I have only tried it on. Anorak also has goretex) Having a hard time deciding which one to keep!
Here are the specific jackets: Anorak, Full Zip

During the season I keep it in my car cause I’m lazy and don’t feel like bringing it up the stairs. and for off season I bought a wall mount on Amazon to hang it up. YYST Snowboard Storage Rack Wall Mount Wall Holder - Hardware Included-Hold 2 Boards https://www.amazon.com/dp/B01L1SY8DY/ref=cm_sw_r_cp_api_glt_i_0PTKDN9F2BKK87NV58B9?_encoding=UTF8&amp;psc=1

https://www.amazon.com/dp/B09CLLB99M/ref=cm_sw_r_cp_api_glt_i_TJK4G98WCDY06EBDPWYE?psc=1

I painted mine white to match my board and stuck it right behind my rear binding so if the board is sitting upright it’s closer to the ground out of sight. Anyone stealing a board probably won’t inspect it too closely when they grab it.

As others have posted you can get a cheap $10-$15 retractable cable lock. The cable is like the thickness of a bicycle brake cable.

I personally got a cheap cable lock similar to the one below. But I got it from the dollar store for $2. I think mine is only 3 feet long so it's a bit lighter.

Master Lock Cable Lock, Set Your Own Combination Bike Lock, 6 ft. Long, 8114D https://www.amazon.ca/dp/B000BD69IS/ref=cm_sw_r_cp_apan_glt_i_19JCFRJJ9PM6E31B72QM

Tahoe is crazy wet if it's not properly cold, Mammoth is at higher elevation so not AS bad, but the earlier storm this month I was getting hosed (wore some older gear, ended up applying nikwax immediately after the trip). Pow was sticky/heavy, pants were getting soaked on the lift, but alas, how can you complain when there's 3ft of fresh. Storm totals were pushing like 6

I was you last year, don't feel like I rode very much. Huge dumps then everything melting practically overnight. Didn't want to spring for a hotel to ride shit-ice. GF got a pass this season though so we've been going up more frequently.

https://weather.com/weather/tenday/l/Mammoth+Mountain+Ski+Area+CA+USCA0662:1:US

This next incoming storm is the first "normal" one we've had in a while where it's snowing for a good week+, but <1 ft per day.

I use these. They are an open speaker with an aluminum (I think) cage that makes them a lot more sturdy than any other open ear models that I have used. If you are getting these make sure you get a better 1/4 to 1/8 converter because the one that it comes with can break due to leverage issues.

They do make gloves with built-in wrist guards...my friend decided to get them after he broke both wrists at once.

As for switch, you can't expect to get it the first day. I forced myself into learning. I picked a day with nice conditions, stayed on greens, and forbade myself from riding regular (except on the lifts). I then progressed to blues, and eventually easier blacks. Like learning anything new on a snowboard, YOU WILL FALL...but it's worth it.

Apparently it's old school technique to improve balance... Though to my eyes it seems that only bad things would come from it, maybe it feels natural when telemarking?

Go see a doctor or a clinic if possible. Although shoulder dislocations are usually minor, there are six different types and some require surgery. Also, doctors know the fastest way to get you back on the mountain. With that being said, exercise that arm. It will make recovery a lot faster. Make sure not to push your limits though or you will make it worse. Don't lift your arm too high for awhile. Your arm should be in a sling for at least one to two weeks. I'm not a professional though and this advice would be for a dislocated shoulder that doesn't require surgery. Here is a link that tells you what exercises to do and when to do them: eHow Shoulder Exercises

I didn't see anything in TWSnow (although maybe I overlooked it) express or implicit which corroborates the "friction ice melt speed" theory. What they do say is this:

>the idea is to expose the structure of your base, because the structure is what moves moisture, which cuts down on suction

But: it is widely held that pressure from the skis causes the snow beneath to melt, but this is nonsense

Clearly there is an optimal amount of surface area so the equation is not to minimize surface area (otherwise a flat base would be perfect rather than a channeled base). You want to reduce friction because that slows you down. that's why you don't want a dirty base. You want to reduce suction because that slows you down. So you want a nice pattern in the base not one that's all carved up from log-slides.

>If the case were more wax = faster, then there should be no reason to scrape your skis or board.

Yes, there would :) you scrape because too much wax = too much surface area = too much friction. Think of the surface area of a stucco wall vs. a marble slab.

Please submit info via this form, I update the stylesheet every few days with the data stored in the form. Thanks!

Please submit info via this form, I update the stylesheet every few days with the data stored in the form. Thanks!

It came with a heavy duty 3m adhesive backing. One of their use cases was under a bike seat so I’m thinking it’s fairly heavy duty. As an extra precaution I cut the finger off of a nitrile glove and put the airtag in the nitrile before putting it in the case as extra water protection.

Pelican - Protector Series - Stick-On Mount for Apple AirTag - Black https://smile.amazon.com/dp/B09CLQ2QMM/ref=cm_sw_r_cp_api_glt_i_P26VX6DYZWNP54ZP9HHE?psc=1

Yeah, I was wondering about back protection. Doesn't feel restrictive at all? Any advantage to the style you linked to over a shirt style?

I love my wrist guards and they allow me to use my hands a lot more than I would otherwise, to plant/drag/protect myself in a fall. I'm so used to relying on them at this point that it would probably be dangerous for me not to. The top plate on the Burtons looks bulky and excessive. All you need is that thin plate on the underside of the forearm to the palm. These Dakines are great IMO and add a little extra warmth too.

I’m not too sure TBH, I had never heard of them either. I needed some goggles in a pinch and they were cheap with next day shipping on Amazon.

I’ve had them out a couple times, and they’re now my go to goggles. The magnetic lenses are killer if you have a traditional style. https://www.amazon.com/dp/B014XKTFI0/ref=cm_sw_r_cp_api_glt_i_JK23SZ4GTVBVA6767X30

https://www.amazon.com/RipStik-DLX-Caster-Board-Black/dp/B07QBGPL6N/ref=mp_s_a_1_4?crid=1NH7A654L48U5&amp;keywords=ripstik+adult+size&amp;qid=1643242066&amp;sprefix=ripstick+adult%2Caps%2C214&amp;sr=8-4

I ended up getting the Arcteryx Cerium LT and the REI hardshell. Do you have any suggestions on a midlayer? I have a Arcteryx Covert Cardigan and a Patagonia R1 Fleece Pullover but I hate pullovers cause they're a pain to take on and off.

I have this kind of balaclava, do you think it is sufficient?

https://www.amazon.com/gp/product/B007UDF65O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1