What are /r/sticker's favorite Products & Services?

From 3.5 billion Reddit comments

Thank you! And yeah I’ll for sure link it but I gotta say, it’s not super impressive to me. I absolutely love the glitter/holo effect but there’s tiny little scratches all over the laminate Amazon

Amazon has a bulk bags for around $8 for 100pcs . https://www.amazon.com/Korlen-Motorcycle-Skateboard-Graffiti-Stickers/dp/B01A6QRT2Y/ref=sr_1_5?ie=UTF8&qid=1469329731&sr=8-5&keywords=stickers

Not sure how many 80s kids are in this sub, but I thought I’d post these here. I’ve been working with Steve Nazar to relaunch the classic Thrilla Gorilla shirts from the 80s. People were asking us to do stickers too so this is our first set. How’d we do? You can grab a set on Amazon here

Thanks :) I'm using Adobe Illustrator Draw. The iPad app allows me to export to Adobe Illustrator on Desktop. I then export the artboard in Illustrator to SVG and clean it up in Sketch.

http://www.adobe.com/products/draw.html http://sketchapp.com

I use this paper from Amazon in matte and then I laminate it with Avery stick on lamination sheets! It’s $13.49 for 30 sheets and definitely thicker than the online labels sheets, I like it much more. With the lamination they’re pretty water resistant. My silhouette can detect the printed marks but I have to put matte tape over the registration marks for my cricut to be able to read them. Unfortunately my silhouette has been cutting off center for a week or so and I’m not sure how to fix it :/ someone suggested reversing the registration marks but it didn’t work for me.

Its a Canon Pixma, I think its the G5020 model

I've been experimenting with a few vinyls, recently I've been using this one: JOYEZA Premium Printable Vinyl... https://www.amazon.com/dp/B082ZDZ894?ref=ppx_pop_mob_ap_share

The laminate i used was just the one that came with my laminator machine I got at Walmart, but if you have any recommendations that would be great. Main issues im having is color fading to a kind of green tint, and water seeping in from the sides and causing water lines & splotches

Yes, the glossy vinyl. I have been through a lot of brands of sticker paper, and so far, this is my fave. My previous fave was PPD (Photo Paper Direct), but they switched suppliers and the sticker paper quality suffered, and it STUNK. The HTVRONT paper is just as good, if not better, and the price is great, too. It has a really nice sheen to it. https://www.amazon.com/Printable-Vinyl-Inkjet-Printer-Laser/dp/B08H1SL9VX/ref=sr\_1\_3?crid=23EQ20PBRLJ53&keywords=HTVRONT+sticker+paper&qid=1660008455&sprefix=htvront+sticker+pape%2Caps%2C135&sr=8-3

Maybe r/crafts might have more answers?

I use a scrapbook-like adhesive machine (Amazon Link: Xyron Create-a-Sticker, 5", Sticker Maker, Machine, Permanent Adhesive (0501-05-10A) ). You feed the paper through the rollers. Bottom rollers have sticker adhesive that transfer to the back of your paper. This machine uses a hand-crank on the side for the rolling mechanism. It also applies wax(or parchment?) paper that you peel off to expose the adhesive.

I suppose you could also apply glue on the back with a brush? Not sure what type of glue you would want to use though.

Have you tried using self-adhesive sheets? It’s what I use for my stickers and is a much easier process. I use these sheets from Amazon which are $14 for 25 full size sheets. The second video went over it, but I would ignore what she did and just cover your entire sheet with one sheet of the holographic laminate, it’s much quicker and easier.

what abeout clear coat like this https://www.amazon.de/edding-Permanent-Spray-Klarlack-Schlagkr%C3%A4ftigkeit/dp/B00CSLM46C/ref=sr\_1\_1\_sspa?\_\_mk\_de\_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=F530165SBROV&keywords=clear%2Bcoat&qid=1655131956&sprefix=clear%2Bcoa...

I use decocolor markers and they hold up pretty well and can write on virtually any surface. They also come in different sizes. I used to only be able to find them in Michael’s then they stopped selling them at my local one so I had to go to another for them but luckily sometime in the past year they started selling them on Amazon.

Hi! I actually outsource now instead of making them myself as the quality is just so so much better and as I work full time I don’t have as much time to sit and make them all. Although I used this from amazon when I was making them myself glossy sticker paper

Okay well there is no "sun resistant" sticker paper that will keep from fading. I personally use this

Most custom made stickers use a self-adhesive laminate film like this to cover their stickers. Google "glitter lamination film" and you should find something to suit your taste.

For sticker paper I use this.

For my laminate on the sticker paper (because the ink leaves the paper sticky) I use these.

For reference, I print with the Epson ET-7700 Ecotank

I use this paper and I love the finish it gives, but it does need a laminate bc it's more likely to scratch otherwise. For laminating, I use a self adhesive laminate and a squeegee meant for applying phone screen protective sheets. If you tape down the top corner after applying and slowly peel off the backing while squeegeeing across it like a printer starting from one corner and working across, then you're much less likely to get bubbles. But also I only cut my holo ones by hand anymore. Cutting machines (I've got a Silhouette cameo 4) apparently do not like anything holographic.

Thanks!

I did these as a pre-order to fundraiser money for organizations supporting BIPOC and LGBTQ organizations in the outdoors last month.

The preorder is closed but you can sign up to get an email when they are back in stock!

Here's a link to the item page and here's a link to get an email when they are back in stock.

Thanks a lot!

I picked up 500 of these (maximum amount allowed) yesterday; do you want them?

these are the ones that have art on them all over the US:

http://en.wikipedia.org/wiki/Label_228

http://tinypic.com/view.php?pic=9zvbdx&s=7

I just recently started making stickers, so here's what I've learned so far and how I've made it work with the available tools and materials.

I have a 6-year-old Epson R2000 Inkjet printer and primarily use holographic printable vinyl from Amazon. I've experimented with matte, gloss, and translucent vinyl, but all are less than satisfactory for various reasons, so I typically stick the holo vinyl I linked. My tests haven't been expensive so I plan to continue trying other materials. After they've been printed and have a chance to dry, I cut them out by hand with scissors. I plan to get a cutting machine if I can sell enough to justify the cost.

I've also tried laminating, but I don't have any special equipment for that so it's a very tedious process. Minor errors can lead to bubbles, warping, etc. But when nothing goes wrong, the results are great.

​

These look great with the holographics and do really well. They stay stuck on every material I've tried and can be applied on a 1-dimensional curve, but putting them on things like helmets results in slight folds and creases, especially if they are laminated). They are even somewhat waterproof: Submerging does not wrinkle or smear the ink in the short term, but I'm not sure how they would hold up to long-term repeated moisture exposure.

A printer and a cutter (add it to your cart to see the price, which is $189).

I use a canon pixma G5020 Megatank(this one)It’s an inkjet that’s not too pricey and so far has resulted in great quality! And as for paper, both matte and glossy have printed really well with the printer!

1) When I first started making stickers and moved from spraying to laminating I used a Vinyl scraper. The trick is to go slow, have a hard flat surface and move at a 45 degree angle pushing the air bubbles out. Took about a week to become a master at it. Just remember the thinner the top laminate the fussier it is. Take a look at these two if you can but a manual roll (cold) press laminator, you’ll save tons of time and zero bubbles every time.

• Vinyl Scraper Decal Applicator Tool (with Black Felt Edge) HERE

• INTBUYING 14Inch Cold Manual Laminator HERE

2) This depends on the type of top laminate you prefer. Presser sensitive lam is single sided with the sticky back and you usually can’t run this though a hot laminator as it might melt at higher heat. I have not found issues with my adhesive from running in hot laminate settings.

3) Laminating can smooth out the paper depending on the thickness but visually you might still see the texture. For example, if your using an uncoated sticker paper you might still see the texture of the paper v.s smooth vinyl or coated paper. My experience with laminating has been great, It adds a next level of uniqueness, durability and UV protection

4) Do some tests on small quantities of laminating sheets until you find the feel and look your going for( matte, Glossy, Simi-Gloss, Textured,etc) once you buy bulk it’ll cut the cost 50% or more. Hot laminating is cheaper but can requires expensive finishing equipment.

Hope this helps and makes some senses 😬

Yes of course!

Printable Vinyl Sticker Paper - Waterproof Decal Paper for Inkjet Printer - 50 Self-Adhesive Sheets - Matte White - Standard Letter Size 8.5"x11" https://www.amazon.com/dp/B0852X8X7Y/ref=cm_sw_r_cp_api_glc_fabc_jZm-Fb1KF0642?_encoding=UTF8&psc=1

17.7inx10ft Clear Matte Adhesive Film Clear Protective Vinyl Book Covering Film for Crafts Transfer Tape Paper Privacy Window Film Self Adhesive Peel and Stick Shelf Liner Drawer Liner https://www.amazon.com/dp/B07PJM9WMN/ref=cm_sw_r_cp_api_glc_fabc_KXm-FbXPPKWGY?_encoding=UTF8&psc=1

Hi Perrry! I make stickers and I use Premium Printable Vinyl Sticker Paper for Your Inkjet and Laser Printer - 15 Matte White Waterproof Decal Paper Sheets - Dries Quickly and Holds Ink Beautifully https://www.amazon.com/dp/B07NX8M1LP/ref=cm_sw_r_cp_api_fabc_NfbYFbA1WTNDK

I think it’s very nice for high quality stickers. Make sure you add some type of sealant though if you want them to be true waterproof and not just water resistant. 👍

Good luck I m very happy for you ❤️

You can try to make some stickers form this game sky its very popular and cute you gonna make sales form it

Here's the printer I use: Canon Pixma ix6820

It's an inkjet, and it works perfectly on glossy vinyl. It's kinda pricey, but I found it to be the highest quality printer I could find before the prices skyrocket to like $750 bucks. I give it a full 10/10 so far. It's really cool and fun to use, haha.

Funny enough, i've found inkjet printers to work better on the glossy paper than the matte. Maybe that's just me.

BTW you don't have to have a printer that's this high quality. I was using my dinky old all-in-one printer up until it just sorta broke. The main thing is actually the paper, rather than the printer. You might be surprised how good things look once you get some nice sticker paper. Hope this helps.

Wow... Thank you so much for all the advice!!!! I really appreciate it Ekroeger :). I was actually looking into the BN-20 and it seems like a fantastic machine. Maybe I'll pick one up down the line once printing surpasses what my current setup can do.

I ended up purchasing an ecotank from Epson. Seems like it will do a great job since I won't have to deal with small capacity cartridges. Ciss does seem like a great alternative though! Bought some vinyl sheets as well off amazon. It was indeed pricy. When I run out, I may just buy those vinyl rolls and cut them to size myself? haha will save a bit of money.

My main customers would probably be family and friends, for now, to get valuable feedback. One last thing, Do you cold laminate or run it through the heat setting? I've seen some videos on youtube recommending to try and get a cold press laminator.

Thank you so very much again!

Thanks! Like everything in my life, I get all the stuff from Amazon. The bags: https://www.amazon.com/gp/product/B071V7NCWV/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

The backings are here: https://www.amazon.com/gp/product/B0725XT5ZF/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

I mostly use those to mail the stickers out, but I cut the down to size for the backings.

I would like to get some nice glossy backings made up at some point.

I recently got some transfer tape from Frisco Craft that I really like. They offer different variations of transfer tape (they'll send you a bunch of samples with your first order). I just ordered through Amazon: https://www.amazon.com/gp/product/B073XRLZ6Z/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 That's just a roll of transfer tape without backing. I find it really easy to work with actually. But it's not the paper kind; I see you had gotten the paper transfer tape.

Everybody seemed to get a kick out of our last stickers so I thought I'd post the new ones. I'm working with Steve Nazar and Tak Kawahara to reboot the classic DaBoys graphics from the '80s. We got some requests for Joe Cool so here's the result. Rockin Stickers posted this pick on their IG.

We sell them on Amazon in packs of 2. Check them out here

Our IG is @thrillakrew

Thanks!

Agreed. Laminating stickers printed with inkjet is a must. Use these. Get a squeegee to help apply to your sticker sheet before cutting.

As for what you print on: make sure they are weatherproof and compatible with your type of printer.

As others have stated, a lot of artists use shipping labels / USPS labels etc. I personally don't because they aren't large enough for me, I prefer regular ol Avery brand 8x11" sticker paper - but I the USPS ones are free if budget is an issue. And USPS labels are def part of the culture, if that's your thing.

I prefer to hand draw onto sticker paper using markers

A lot of people here like to draw on shipping stickers because they're easy to get your hands on. Those look kind of amateur-y but they also benefit from the raw, un-filtered look of that medium. Those you simply draw pen on shipping labels and yer done.

Others like to buy some supplies to make stickers off amazon. Some things like this: https://www.amazon.ca/gp/product/B008RX1B1Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 are similar to the shipping stickers but bigger and easier to cut out. You can go a step further and add a laminate layer on top of that to make your sticker sheen (The paper I linked above has the same texture as plain old printer paper but it has a sticky back, so adding a laminate will make it look nicer). You can draw on this paper with pen and ink or you can load it into your printer and print out designs you've made!

Other people who have money to spare/really love their designs will take it to the nEXt LeVEL and have their designs printed and shipped to them by sticker companies. Some of the favourites here (I think, I havent been here long) are stickerapp and stickermule. These services obviously print out some really beautiful quality stickers of your design. You can also have them printed in different fashions (Circle Cut, Square cut, die cut, etc.). You can't really beat the quality you get from these guys, but it also costs you some $$$. So make sure your design is kick ass before you send it off :)

This link will get you store credit at Stickermule ($10) if you sign up. Note that this also gets me store credit!! That's why I'm plugging it here ;)

https://www.stickermule.com/ca/unlock?ref_id=2250670701

I use a regular sharpie, a brush sharpie, a ball point pen, and the grey tones are done either with these or some acrylic paint

This paper is a-ok

but also use this or something like it. Spray multiple times if you're using a lot of ink.

edit: tl;dr: if you're using gloss or vinyl use acrylic coating.

If you're making them by hand with shrapie (thats how I do it too) then I recommend Avery Sticker Paper - BUT, it isn't water proof, and they aren't suuuper long lasting.

You could always try silk screening them. It's very difficult to do multicolour stickers this way but it's relatively easy to to one or two colour stickers on clear adhesive paper like this.

Most people I know use this method. You could also use this stuff in place of the tape, but I haven't had any personal experience with doing that.