What are /r/TeslaLounge's favorite Products & Services?

From 3.5 billion Reddit comments

Kids don’t be like OP, use the awesome security system that your car came with. Not only can it potentially provide video of the suspect, but it can also act as a strong deterrent. Showing that you’re being recorded on the screen has the potential to scare people off.

I used to be a fool who only turned it on occasionally. Set it to be on at all times, you can create exceptions for home, work, or favorite places. Get a nice big memory stick, I just got 500 GB for $85 on Amazon.

SAMSUNG T7 Portable SSD 500GB - Up to 1050MB/s - USB 3.2 External Solid State Drive, Gray (MU-PC500T/AM) https://www.amazon.com/dp/B0874YS2N7/

It looks like a jack puck. You use them to safely jack up a Tesla and not damage the battery.

Tesla Model 3, Y, S, X Lifting Jack pad - 4 Pack https://smile.amazon.com/dp/B07QR19NM9/ref=cm_sw_r_cp_api_glt_fabc_9T1V309PF013AQKRM05W

Maybe they forgot to take it off when you car was at the SC?

$700? For a fucking cooler?

I got this one for $86 (and even that was more than I really should have paid), but it's nicely padded, holds ice forever, and fits in the trunk bottom space. Should also squeeze into the frunk.

All you need is a $2 adapter. I had a friend with a 3d printer make me one for free. Here's the link to the print file:

https://cults3d.com/en/3d-model/gadget/tesla-model-3-j1772-lock-charger-adapter

I would NEVER do this but I've thought about it :)

https://www.amazon.com/Motion-Pro-08-0183-Valve-Remover/dp/B001KO84I0/ref=sr_1_5?dchild=1&keywords=tire+valve+remover&qid=1618617968&sr=8-5

Not sure if this actually does what I'm thinking, but it's too bad the tool balancer doesn't have a pull to release type mechanism like old projector screens. Then you could pull it down with minimal to no pressure on the charge port, then pull down slightly and retract up when done.

https://www.amazon.com/Ratchet-Locking-Tool-Balancer-Cable/dp/B01FACGQIC

Not the best cooler, but great for long trips with a few ice packs! And it fits perfectly in the frunk, leaving a little extra room still!

Coleman 24 Can Party Stacker Cooler https://smile.amazon.com/dp/B002BM70R6/ref=cm_sw_r_cp_api_i_0x1qCbD6ZJV5J

You may like these j1772 locks: https://www.amazon.com/Super-Durable-Tesla-Charger-Adapter/dp/B082FRF7HY/

They essentially utilize the Tesla "lock" of the J1772 adapter and then lock the J1772 charge handle to the adapter, so you are relying on the Telsa lock port to secure the Chargepoint (or other) connection. It has come in handy quite a few times.

https://www.amazon.com/gp/product/B074G8NJX3/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1

​

Buy 2 of these and remove the current ones and install these bad boys. Your frunk will open automatically

Good lord, highly recommend this one as the process to apply is so simple.

Spigen Tempered Glass Screen Protector [Glas.tR EZ FIT] designed for Tesla Model 3 / Y Dashboard Touchscreen - Matte/Anti Glare/Anti Finger Print https://smile.amazon.com/dp/B084BNC3FG/ref=cm_sw_r_cp_api_glt_fabc_Q26DRQATJHHFF4VN52B2

I bought this collapsible picnic table for Supercharger stops like this.

Not amazingly stable, but gets the job done for quick stops.

Outsunny Portable Foldable... https://www.amazon.com/dp/B0083381MA

No sorry, it didn't even occur to mention the ones I use.

PC: TeslaCam Viewer II by Nate McCombs Android: https://play.google.com/store/apps/details?id=com.snailboat.teslacamreviewer Tesla Cam Reviewer IOS, some random app I like the way it performed I'll look it up

Edit: iOS: Cam Viewer, icon is the Tesla dashcam icon

Aww, cute puppers! But please invest in a dog barrier so your pup doesn’t go flying in an accident. I hear the small VarioBarrier HR works well in a Model Y: https://www.amazon.com/4x4-North-America-Safe-VarioBarrier/dp/B07D9RFXGV

Also, prong collars make me very sad. :( Have you considered reward-based positive reinforcement training instead?

This one works for my pups drool marks and has a normal/nice smell:

CarGuys Super Cleaner - Effective All Purpose Cleaner - Best for Leather Vinyl Carpet Upholstery Plastic Rubber and Much More! - 18 oz Kit https://smile.amazon.com/dp/B071XB18BF/ref=cm_sw_r_cp_api_glc_fabc_zDu3FbWW8KTDA

Dupli-Color AFM0360 Dark Shadow Gray Ford Exact-Match Scratch Fix All-in-1 Touch-Up Paint - 0.25 oz. https://www.amazon.com/dp/B00HE66OK8/

edit: I see someone else indirectly sent you to the same product. I used it, it’s fine. I’m not paying for professional repair to only do it again. :-) Covering it up works well enough. It stops that annoying/embarrassing strobe effect that you get when you have the bare metal rotating and reflecting..

I use this in my S, should work fine with an X. https://www.amazon.com/dp/B01GQPXBQC/ref=cm_sw_r_cp_apa_glt_fabc_RYFQWPQEEWXWQEBTEX4M?_encoding=UTF8&psc=1

Portable SSDs work better than flash drives, if your car fries this, it might have an electrical problem

Re: "they need a Tesla": not necessarily. There are adapters that convert from Tesla to J1772 (for example this one). Saw someone charge their BMW 530e at a Tesla destination charger with one of those.

Also this….

August Wi-Fi, (4th Generation) Smart Lock – Fits Your Existing Deadbolt in Minutes, Matte Black https://www.amazon.com/dp/B082VXRND2/ref=cm_sw_r_cp_api_glt_fabc_KXM33FZGRM4TMBSR44CZ?_encoding=UTF8&psc=1

Bought these and love them:

TOUGHPRO Floor Mat Accessories Set (Front Row + 2nd Row) Compatible with Tesla Model 3 - All Weather - Heavy Duty - (Made in USA) - Black Rubber - Mar 2019 - Aug 2019 https://www.amazon.com/dp/B0792RW471/ref=cm_sw_r_cp_api_glt_fabc_GT2MEYNZ23KE1NKGYE87?_encoding=UTF8&psc=1

I wash in the shade and dry with a large microfibre towel from Chemical Guys. Drape it on top and just drag all the water off in one go.

Search on eBay or Amazon.

I have used this to repair interior tears. You mix the colors to match, apply, and after 10 minutes of drying use alcohol to matte and blend the surface

interior repair kit

Dupli-Color AFM0360 Dark Shadow... https://www.amazon.com/dp/B00HE66OK8?ref=ppx_pop_mob_ap_share

I bought this from amazon and it worked great. Has a coarse end to sand it down and matches perfectly.

I was thinking of getting something like this and just screwing it into the the bottom of the compartment or something. It’d be hard to get out or destroy. I really wish Tesla had put an active USB data port in the glove box.

Do you have nextdoor.com in your area? It's kind of like facebook but limited to your neighborhood and the surrounding neighborhoods. Whenever I need something done, I get recommendations from neighbors on there and I have always gotten great work done at great prices.

Camco 30' PowerGrip Heavy-Duty Outdoor 50-Amp Extension Cord for RV and Auto | Allows for Additional Length to Reach Distant Power Outlets | Built to Last (55195) https://www.amazon.com/dp/B0024ECIP0/ref=cm_sw_r_cp_api_glt_fabc_1EBK1TCEPCZQSX7D8MBP

Something like this is going to be essentially the same as the one Tesla sells (minus Tesla branding)

Airman ResQ Pro+ tire repair kit ( https://www.amazon.com/ResQ-71-063-021-Tire-Repair-Compressor/dp/B00BJ2TBL2 )

I use it regularly. Most chargers I used were either 6.6kwh or 7.2 which is slow. If you leave the car unattended I recommend the anti-asshole lock for the adapter. Tesla Model 3/Y Charger Lock for... https://www.amazon.com/dp/B083PQ5NLL?ref=ppx_pop_mob_ap_share

That setup is going to destroy that charger in a couple of months. Anyways...

https://www.amazon.com/PHEOKER-Charger-Organizer-Connector-Charging/dp/B08VNHSGBG/ref=sr_1_7?crid=2A1EU3LI4L7C0&dchild=1&keywords=tesla+cable+organizer&qid=1624472961&sprefix=tesla+cable+o%2Caps%2C222&sr=8-7

For a piece of plastic I don't need to pay Tesla for the upcharge and delivery fees. I got it for $19.99 but right now its $15.99 Prime Days.

Is this what you got? My memory card doesn’t seem very reliable

SAMSUNG T7 Portable SSD 500GB - Up to 1050MB/s - USB 3.2 External Solid State Drive, Gray (MU-PC500T/AM) https://www.amazon.com/dp/B0874YS2N7/ref=cm_sw_r_cp_api_glt_fabc_AHJ9V609CC81Q4K2DPZ2?_encoding=UTF8&psc=1

I have a Red 2021 Model 3 LR and i havent gotten too crazy. I bought the official Tesla floor liners, the console trays, and one of my favorite purchases, were these valve stem caps. The stock valve stem caps were hilariously cheap for a car that costs $50K+ so i promptly swapped them for less than 8 bucks

Most of what I've bought was from Amazon.

1. SSD to replace the USB stick in the glovebox. Velcro strips to hold it down.

2. Grocery bag hook that screws on to an existing screw in the trunk

3. An organizer that fits into the hole on the lid of the center console It doesn't fit much, but it's a good place to hide a few small items

4. I tried to get another organizer that fits into the front center console, by the phone chargers but the one I got didn't fit the 2021 3's very well so I ended up using it in the back center console instead. They may have come up with a new one now.

5. A good screen cleaning cloth. The car comes with one in the glovebox but it's nice to have a larger one.

They don't come with the car. This is what I bought but I'm sure there are lots of options out there.

Amazon.com: Chirano Lifting Jack Pad for Tesla Model 3/S/X/Y, 4 Pucks with a Storage Case, Accessories for Tesla Vehicles: Automotive

I had a terrible experience with Tesla’s roadside service when I had a flat. I decided I would be prepared to fix myself until I could get to a tire shop to have them fix. I bought this kit and an air compressor to keep in my Model 3. From what I hear this is a better option than using the slime.

https://www.amazon.com/dp/B07G252DCC/ref=cm_sw_r_cp_api_glt_fabc_ZZHPWHM53X0FVNG4WW20?_encoding=UTF8&psc=1

The use of rodent friendly wires in cars and everywhere else isn't new. I lived in a house that lost power one winter due to a squirrel eating the insulation of the power line (it would not make that mistake again).

I would recommend getting ultrasonic rodent repellent devices (like these). And plug one or two in the garage, as well as anywhere else in your home you have seen signs of them.

I’ll try that too! This one? Thoughts on the... pineapple scent? (Seems like a bizarre scent choice)

Chemical Guys SPI_663_16 InnerClean Interior Quick Detailer and Protectant (16 oz) https://www.amazon.com/dp/B008LPEZ6Q/ref=cm_sw_r_cp_api_glc_fabc_08t3FbDKWGCZ9

Just look for an industrial 14-30 outlet. The residential ones are not made for constant plugging and unplugging ... the industrial ones should be fine. It's probably only a difference of paying $30 versus $10.

If you want more realistic quotes, nextdoor.com is a social media type app /website that is limited to your neighborhood and surrounding neighborhoods. You could probably find a quote or a neighbor that knows a reasonably priced electrician. Don't tell them it's for a Tesla.

I ended up plugging the USB stick in my laptop and running the following command to delete files older than 30 days and plugged it back into the car.

Wish the Tesla software had this option.

Do you have nextdoor.com in your area? It's sort of like a facebook type social media but limited to your neighborhood and surrounding neighborhoods.

I have gotten great recommendations from neighbors when I needed stuff done, at great prices.

It seems silly but this has been my davorit accessory. Carwiner Trash Can for Tesla Model 3/Y Suede Leather PU Garbage Cans Garbage Bin Garbage Bag Hanging Magnetic Buckle Waterproof with LED Light (Model https://www.amazon.com/dp/B08Z896QRZ/ref=cm_sw_r_apanp_i49Ytc1LaTuk9

This sticker comes with “Scrape-It Technology” to guarantee to annoy whomever you put the sticker on.

CPROSP 4 Pack Tesla Model 3/S/X Lifting Jack OAD Jack Lift Point Pad Adapter https://www.amazon.com/dp/B08NSFSPXZ/ref=cm_sw_r_cp_api_glt_fabc_8B72Q6RG7NKM1QWHC5B7?_encoding=UTF8&psc=1

They aren’t necessary to safely lift the car.

I have a Samsung portable SSD. Seems to work pretty well over the last nine months:

https://www.amazon.com/SAMSUNG-Portable-SSD-500GB-MU-PC500T/dp/B0874YS2N7/ref=sr_1_4?_encoding=UTF8&c=ts&dchild=1&keywords=External+Solid+State+Drives&qid=1626280369&s=pc&sr=1-4&ts_id=3015429011

I dont like adapters like that where they are all molded into one use. ripe for heat build up. i prefer this style with a bit of cord between the connections. more wire to remove heat from the higher resistance connection points.

https://www.amazon.com/Parkworld-885521-Adapter-10-30P-14-50R/dp/B078K4ZQHW

I don’t like SSDs for this application since you have to worry about keeping them from bouncing around.

Get an endurance SD card: https://www.amazon.com/gp/product/B084CJJRBW

USB adapter: https://www.amazon.com/gp/product/B085P5FDXQ

Will last decades.

It’s this one from Amazon:

Spring Balancer, Tool Balancer, Capacity: 4.4-6.6 lbs, (Sumake SB-3.0) https://www.amazon.com/dp/B0799QCM9M/ref=cm_sw_r_cp_api_glt_fabc_2GAH85W3CJJRN4VSRBGA?_encoding=UTF8&psc=1

The phone mount is this one for iPhone 12 MagSafe series

Quarble Magnetic Dashboard Car Mount Compatible with MagSafe Case and iPhone 12 Pro Max Mini, 360° Adjustable Phone Holder No Metal Plate Needed 2021 All New https://www.amazon.com/dp/B08TBHBMHN/ref=cm_sw_r_cp_api_glt_fabc_PRF0G3MJP3GTBMFKEJ1A?_encoding=UTF8&psc=1

This is the vinyl wrap I purchased on Amazon. I went with the Matte Black 1FT X 5FT size.

Black Matte 60 Inch x 1ft Car Wrap Vinyl Roll with Air Release 3MIL-VViViD8 https://www.amazon.com/dp/B00L9JAS80/ref=cm_sw_r_cp_api_glt_fabc_48QA7769SM2HCXGJKGXF?_encoding=UTF8&psc=1

https://i.imgur.com/lLWOTRt.jpg

This is my poster board stencil I cut to use for the design. It’s about 15 inches x 5 inches. This was a good bit larger than the surface area of the dashboard that I wrapped to leave room, so if you started from here you’d be in a good position depending on your design.

Good luck!

My recommendations based on functional necessity:

• Mud flaps (you already got 'em)
• PPF for rear doors (the mud flaps won't stop 100% of the debris hitting the rear doors and causing paint chips)
• Center console tray so you have more organization than just a huge hole
• Tesmanian all weather floor mats (front, rear, trunk, sub-trunk, and frunk)
• Cup holder insert (the cup holders in center console are too large for regular water bottles and 12 oz cans). I've been happy with this one: https://www.amazon.com/gp/product/B089ZY66ZX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Absolutely!

I’d recommend getting these (below) the smaller the more powerful. The pressure washer comes with a turbo nozzle and it’s awesome.

https://www.amazon.com/Twinkle-Star-Pressure-Multiple-Degrees/dp/B06XSHM8WB/ref=zg_bs_13400431_2?_encoding=UTF8&psc=1&refRID=CE8RS80PHQ4SB8F6EA0Z

Here is a good demonstration of what it’s capable of:

https://youtu.be/AEv1nNiwuJY

Sure 😃 (I'm just copying and pasting from my Amazon app, so hope there are not mod rules against this)

Bluetooth adapter - https://www.amazon.com/dp/B00PJPHEBO/ref=cm_sw_r_cp_apa_glt_fabc_MRATJHZ3CZJ7NH93DXAA?_encoding=UTF8&psc=1

Cable - https://www.amazon.com/dp/B08DXY5KVX/ref=cm_sw_r_cp_apa_glt_fabc_RCEXN3NGH17MDKMVR4R0?_encoding=UTF8&psc=1

Than you need to get the Scan My Tesla app for either iOS or Android

You can easily find a YouTube video for how to install... But most importantly you need to 'Power Off' the car before you unplug the wiring loom. I also suggest a trim removal tool vs. a knife to pry open the panel. You get a free one when you buy a cabin filter set from Amazon (which you'll need at some point :) )

Hope that helps. Feel free to DM if you need any other help.

YelloPro Auto Custom fit Heavy Duty Cargo Trunk Mat (4pcs) Waterproof All Weather Accessories for 2021 Tesla Model Y - 7 Seater - All Weather [Made in USA] Black Rubber Environmental https://www.amazon.com/dp/B0961X3ZZX/ref=cm_sw_r_cp_api_glt_i_NKPEA4QHTQK1W9YN3BKB

I bought this one for the front place on the floor on the passenger side near the center console front trash can Then bought this for the back trash can

I just ran out of my old leather cleaner and still have leather seats to clean in my current car while I wait on my MY delivery so I picked some new stuff up. Do you think this would still be ok on the Tesla leather? https://www.amazon.com/dp/B001TJ3HUG/ref=cm_sw_r_cp_apa_glt_fabc_30QPV8TYRFAKDMHSPRFM

Maybe this and some of those suction cup window shade things? The Noggle-Making The Backseat Cool Again-Quick & Easy to Use Car Travel Accessories for a Comfy Ride Summer or Winter-Air Vent Extender Hose Directs Cool or Warm Air to Your Kids-8ft, Grey Quatrefoil https://amazon.com/dp/B01J6MAHBE

To piggyback on this, there is all manner of sketchy adapters and extension cords on Amazon with lots of positive reviews.

Like this one that lets you plug the 50A Tesla adapter into a 30A outlet. Better hope your breakers are installed correctly!

Make sure you double check everything.

These insulted power blocks work well too. This is what I shoved inside a junction box for my gen2 load balancing

Morris Products Black Insulated Multi-Cable Connector – 3 Wire Ports, 4-14 Wire Range, Slotted Allen Hex – 1.50“ L x 1.45” H – Single Entry – Small Wire Range https://www.amazon.com/dp/B005GDFUDI/

My job calls them hubbles. We have a lot of them for trailers and generators at my work. I bought this adapter and charge at 40a 240v or 210v depending the location at my work.

ONETAK NEMA SS2-50P to 14-50R 120V/240V 50 Amp Marine Shore Twist Lock 4 Prong Male Plug to 4 Prong Female Receptacle Generator Welder Dryer RV EV Charger Power Cord Adapter Connector https://www.amazon.com/dp/B07XW9NGQJ/ref=cm_sw_r_cp_api_glt_fabc_SQJ73ZJNCEJGH7EKMVNA?_encoding=UTF8&psc=1

Can’t vouch for this specific product, but a weatherized AP in the garage with wire back to the house or a directional antenna from the house to the garage would be your best bet. You need WiFi for updates, plus you may find having outdoor coverage leads to using the space more.

https://www.amazon.com/Tupavco-TP542-Panel-WiFi-Antenna/dp/B015QF7EMK

Bought 2 Pittsburgh 3ton low profile jacks and a breaker bar from Harbor Freight (only need 1 for 1 tire), a pack of hockey pucks and a 21mm non marring socket from Amazon, a rubber nub/locator to screw into hockey puck.

Place car in jack mode, insert hockey puck into jackpoint under car, lift up corner of car with jack just enough to begin lifting body while keeping wheel contact with floor. Break nuts free with breaker bar, lift car more about an half an inch off the ground, undo nuts all the way and pull wheel off. I then replace it with a spare tire since I can really place a jack stand under the same jack point where the jack is holding… torque to 129 ft lbs, drop car.

Here are some links to the products I used that I could find quickly:

Titan 21093 1/2-Inch Drive x 21mm Non-marring Impact Deep Lug Nut Socket https://www.amazon.com/dp/B008XMDSJC/ref=cm_sw_r_cp_api_glt_fabc_ESKQ2ZQ242DWAKJ82TG3?_encoding=UTF8&psc=1

Faswin 18 Pack Classic Ice Hockey Puck with 3 Reusable Mesh Bag https://www.amazon.com/dp/B01FQ6H3V6/ref=cm_sw_r_cp_api_glt_fabc_AC12A15JYYN87F7Z7QFC?_encoding=UTF8&psc=1

Can’t find a link for the nub thing but now people sell the “Tesla jack pads” all over the place, I made 8 of mine to carry 4 in my car and some at home for my needs.

Now if you meant taking the rubber off the rim, I didn’t do that… don’t have the wheel machine for that

I saw a recommendation to soften the rubber and ease this problem:

https://www.amazon.com/gp/product/B004B8GTQG/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Not sure if this is what you are talking about. I have these in my Model 3.

Car Seat Protector with Thickest Padding - Featuring XL Size (Best Coverage Available), Durable, Waterproof 600D Fabric, PVC Leather Reinforced Corner https://www.amazon.com/dp/B01MXQJWRA/ref=cm_sw_r_cp_apip_vn6hCiC4TSzgM

Heavy Duty Kick Mats Back Seat Protector (2 Pack) - The Sag Proof, Waterproof, Odor Proof Car Back Seat Cover for Kids Who Make Big Messes | 3 Reinfor https://www.amazon.com/dp/B01N7AIRYD/ref=cm_sw_r_cp_apip_6HXTVPzPDinAJ

I have a zillion baby infrastructure recommendations (parent consultant by profession), but for this request in particular I highly recommend car seat guardian. I’ve been using them for years. It’s also way easier said than done, but not letting kids eat in the car cuts down tremendously on messes.

I'm *so* glad I got the tempered glass screen protector - a couple weeks ago I was cleaning the inside windshield and my steel watch strap banged the corner of the screen, and chipped the screen protector, leaving the screen intact (phew!). (I've also heard some folks have chipped their unprotected screens with big keyrings, handbag buckles, etc, and chips can lead to cracks, and it's thousand of $$$ to replace). I got the $17 Topflight tempered glass one <here&gt;, and have been very happy with it - it has a nice oleophobic coating, easy to clean and has a slick smooth tactile feel just like the unprotected screen.

Not OP, but this is the one I used: https://smile.amazon.com/dp/B07RSNL3T2 There's a website referenced in the instructions that has really good video tutorials on how to cleanly apply each piece.

Found it: https://evwraps.com/pages/tutorials

I used this to mount it to the recommended location. https://www.amazon.com/gp/product/B07ZDJJPWH

Barely noticeable from the outside, and I forget it's up there.

Yep! Any iPadOS device would work. What’s neat is that I only had a regular iPad, so to accommodate for the seats reclining and moving back, I bought this mount which has an extender on it. So you can recline both front seats as far back as you want without any issues.

https://www.amazon.com/dp/B07L3Q7Y4F/ref=cm_sw_r_cp_api_glc_fabc_p048FbMRZ8QG5?_encoding=UTF8&amp;psc=1

It isn’t hard to lift the car if you have a low profile hydraulic jack. It’s no different from any other car IMO. You should use a jack pad adapter like this one - https://www.amazon.com/dp/B07S51J6FN/ref=cm_sw_r_cp_api_glc_fabc_1l.1FbV5ZPW1F - note I didn’t search too hard for that. That’s a cheap one but it looks fine, although I bought a nice machined aluminum one from Amazon. I couldn’t find it though.

Nah, that ad is poorly worded... it's like someone ordering a "martini up on the rocks".

ABS plastic cover -- that's the thing you are looking for.

If that ad scares you -- get this one - costs a few bucks less.

(Model 3 here for those of us reading) I ordered a rear seat container that zips up nicely, no complaints so far: https://www.amazon.com/dp/B07CMZ11TX?ref=ppx_pop_mob_ap_share

It also zips up on the sides to keep the dog hair from going everywhere and has a window so the anxious one can still see us up front lol. Take it out, shake it off and fold it up for trunk storage!

May still work in your model Y if it has a place to hook the straps!

I was thinking about getting a ring for swimming or running:

CNICK Tesla Accessories Key Fob: Card Replacement Key Ring for Model 3 Model Y, The First Tesla Key RFID Smart Ring for Man and Woman https://www.amazon.com/dp/B08JQGYZ73/ref=cm_sw_r_cp_api_fabt1_vGDSFb9FBCA5V?_encoding=UTF8&amp;psc=1

COLMO Model 3 Smart Ring Accessory for Tesla Model 3 Key Card Key Fob Replacement Ceramic RFID Smart Ring Support Customization Fast Priority Delivery Worldwide (9mm US 7) https://www.amazon.com/dp/B08FHVJHVK/ref=cm_sw_r_cp_api_fabt1_0IDSFbN8JE5G5?_encoding=UTF8&amp;psc=1

Do you care about the mirrors? The chrome delete is actually not that hard to do yourself, if you skip the mirrors.

I did a chrome delete with the kit from Amazon and bought carbon fiber mirror caps from RPMTesla and called it a day. <$200

2x [3M Satin Black 5ftx1ft] $30 (https://www.amazon.com/gp/product/B008OIQEG4/ref=oh_aui_search_asin_title?ie=UTF8&amp;psc=1) 1x Model 3 Gen 2 Carbon Fiber Mirror caps $139

The stickers have the white boarder. I bought some PPF and used it on the other big sticker in place of the one I had with Clean Cling. Without the while CC backer, it's definitely not as bright white and purple. But it's still ugly.

I highly recommend buying some PPF and doing it that way. You can buy some on Amazon for $10.

I used this: https://www.amazon.com/dp/B01LZN1IK9/ref=cm_sw_r_cp_tai_OX.SCbC8CTE19

And used the method on this vid: https://youtu.be/O93p0Z9Eo2g

I bought this $18 Xbox style controller off Amazon, works great and no fussing around with dongles, batteries, etc. https://www.amazon.com/gp/product/B06XB6FRPR/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&amp;psc=1

3/Y can support HEPA and there are lots of third party solutions. They cannot support Bioweapon Defense Mode due to size.

https://www.amazon.com/XTechnor-Filter-Activated-Conditional-Replacement/dp/B085HX67ZX

How good of an electrician are you?

&#x200B;

https://www.amazon.com/Coleman-Cable-50-Amp-4-Wire-6-Foot/dp/B0002YURAW/ref=sr_1_15?dchild=1&amp;keywords=nema+14-50+dryer+plug&amp;qid=1599001013&amp;sr=8-15

Installed 6-50 240v 40amp just off my breaker in third bay. Family is not great about leaving me space. I backed in or would string cord under third door if I was charging during the day. Recently bought two of these on Amazon and mounted to garage wall running above the doors with drops so I can use both and plug UMC on far end of the garage or middle bay by disconnecting the 2nd cord. I didn’t lose any power and still get about 30 miles of rated range per hour.

Miady 25ft 50AMP Welder Extension Cord, 8 Gauge Heavy Duty Industrial NEMA 6-50 Welding Machine Cord with Lighted End, ETL Approved

I live in West Michigan, so it's seen a full 4 seasons. Ended up putting 23.5k miles in just over a year owning it. I felt this spring had a lot more cotton wood in the air which was evident within the filters.

I replaced myself with this replacement from Amazon.

https://www.amazon.com/dp/B085HX67ZX/ref=cm_sw_r_cp_apa_i_DuydFb29E1B2N

It wasn't hard to replace, but a pain to get to. Just followed a couple YouTube vids and went for it.

I ended up replacing with these HEPA filter on Amazon.

https://www.amazon.com/dp/B085HX67ZX/ref=cm_sw_r_cp_apa_i_DuydFb29E1B2N

Haven't really gone through the paces of testing the new filters, but there moldy smell that hit as the AC kicked on is no longer there.

I’ve had this one for almost 3 years with no issues. Use it all the time to top off the tires and it’s great peace of mind: Portable Inflator

Suggest you buy an EVNV seat cover for daily driving. They come white or black, They are water/coffee proof, slip on and off in about a minute and they won't interfere with the airbags in your seats.

Nice writeup.

I wanted some for my new Y and bought a 4pc kit from Ganluuree off of Amazon.

https://www.amazon.ca/gp/product/B0988X1K2W/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&amp;psc=1

They showed up yesterday and got them in last night. The 2 main ones are flocked, although the color of the flock might be slight lighter than the main Tesla flock.

The front storage one is nice, fits well, and it is nice that it slides. I had seen one that was actually spring loaded like the sliding lid, but didn't get it as I liked the compartments on this one better. Or maybe it was the price of this kit.

The one for the main one just sits in place, but does have an opening the the charging outlet. It has to be lifted out to get below it, but not many other options for that location.

The "under the armrest" one fits nicely and sticks into place. Not sure yet what I will use it for, but it does make use of the empty space there.

It also came with a TPE cupholder. The cupholder fits nicely, but almost makes it too small for a lot of items. It fits my coffee mug, but any larger diameter items like my wife's coffee mug don't fit. Would fit plastic bottles or cans fine though.

Overall, them seem fine so far. Nice to have some organization for those cubbies and not have to reach down so far to get stuff.

I got one of these when I got my M3. I just stuck some EZ pass velcro to the myQ opened remote and stuck it in here (so I didn't have to velcro anywhere on the car). This way, it's not on the visor and easy access that can be hidden. Works great.

XTAUTO Center Console Organizer... https://www.amazon.com/dp/B08SR83CM3?ref=ppx_pop_mob_ap_share

It's not an organizer per se, but I'm a big fan of this lockbox designed for the 3/Y console.

Here's a video of mine: https://imgur.com/jhS7rmX

I added the felt on the lid so I can keep my sunglasses on there and not scratch them up. And yes, the handle makes a good Chapstick holder lol.

https://www.amazon.ca/Blinker-Fluid-Professional-Grade-Blinks/dp/B0BB8ML814/ref=mp_s_a_1_2?adgrpid=60758536243&amp;gclid=EAIaIQobChMIqaabzPT6-wIVjLfICh3wbAhIEAAYASAAEgItY_D_BwE&amp;hvadid=310043530703&amp;hvdev=m&amp;hvlocphy=9000907&amp;hvnetw=g&...

Sure here you go...Remember, I traced the outline and mounting points form a OEM-ish set and cut them to fit using tin snips .

The ones I cut to fit...

The ones I traced and sent back...

Hell no don’t buy that there in the link lol if you’re gonna cover your seats at least give it some style. I originally have black seats in my car but I wanted to spice it up, I bought these right here on Amazon https://www.amazon.com/dp/B07TQLCRZK?ref=ppx_pop_mob_ap_share

They have a few colors but I went with the black and white variant. They look OEM, very sporty, and also if I screw them up completely it’s only a couple hundred bucks to get an entirely new set. I can take pictures for proof if you need an idea on how they look. I installed it by myself as well, so in case you don’t have anyone else it’s definitely doable to do alone. Took me a couple hours to do

This is the closes I've seen.

https://www.amazon.com/YONZEE-Charging-Connector-Organizer-Accessories/dp/B09PD9N6KR/ref=sr\_1\_1\_sspa?crid=2BGGQENXNHPJ8&amp;keywords=tesla+wall+connector+box&amp;qid=1670635157&amp;sprefix=tesla+wall+connector+bo%2Caps%2C118&amp;sr=8-1-spons&am...

MAYFLASH Magic NS 2 Wireless... https://www.amazon.com/dp/B09PT92QL1?ref=ppx_pop_mob_ap_share

USB Hub, BYEASY 4 Port USB 3.0... https://www.amazon.com/dp/B07FH7XJCD?ref=ppx_pop_mob_ap_share

I used these with my ps4 and switch pro controllers. Plus into the glove box and even supports Xbox games in the browser.

https://www.amazon.com/gp/product/B08Q22651D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1

&#x200B;

This one. Most Tesla drivers have a J-1772 adapter, but not many other EV drivers have the Tesla adapter. And this charger is a beast. I've put it in every place I own.

I'm in Europe so I suppose the standards are a little different, but it's this: https://www.amazon.com/dp/B09G75G4MX?psc=1&amp;smid=A1AIT61YGQ94EV&amp;ref_=chk_typ_imgToDp

I want to leave the UMC inside the garage and use the extension on the vehicle plug end instead.

So I got these ones, and centered it up with the caps they give you. The ones that come with it have what looks like a Nintendo 64 logo on it lol. So the Tesla sticker covers that. Plus it’s all a sticker anyways so if you don’t like it there’s other options.

https://www.amazon.com/Center-Sticker-Stickers-2-22inch-Material/dp/B08S35C8CT/ref=mp_s_a_1_2?crid=O0V57T97V5V3&amp;keywords=tesla+center+cap+sticker&amp;qid=1670201650&amp;sprefix=Tesla+center+cap+st%2Caps%2C240&amp;sr=8-2

You can buy a digital meter for about $10 it plugs into the cigarette lighter

I have a protruding outlet like the OP and got this holder which comes with a base for these types of nema outlet setups. This includes the cable hook but you can buy the base/holder separately.

https://www.amazon.com/PHEOKER-Charger-Organizer-Bracket-Protruding/dp/B09J6GSMB2/ref=sr\_1\_1?keywords=PHEOKER+Tesla+Mobile+Charger+Wall+Mount+Cable+Organizer+Bracket+with+UMC+Holder+and+Riser+Base%2FSpacer+for+Protruding+Outlet&amp;qid=166961043...

These on a hub in the glove work wonders for any Bluetooth controller. I use PS4 and Switch pro controllers. Works for Xbox game pass in the browser as well. Just set the device to PC mode. The green version. Usb for dash cam works just fine on the same hub.

MAYFLASH Magic NS 2 https://www.amazon.com/dp/B09PT92QL1

My Ford Focus Electric got 6 years on it's 12v battery before replacement (in the Midwest), I have always used one of these. I noticed that it was dipping down to 11.7 v on a regular basis (when checked first thing in the morning). so I changed it out my self.

They're really not that large...

https://www.amazon.ca/Craftsman-C0010020-Portable-Generator-CARB-Compliant/dp/B07P5XRQPR/

And I regularly haul three 25L tanks for the JetSki... All four items would fit in the back MX without putting the seats down... Other models, not so much. :)

i had this one saved in my amazon cart from when I saw a DIY of some guy upgrading everything in his cyberquad for kids awhile back. I can't find it anywhere anymore unfortunately :(
https://www.amazon.com/gp/product/B07KR2FN89/ref=ox_sc_act_title_8?smid=A35UZ0R1AKJWFQ&amp;th=1

following..

I have a this set of towels that I used every 5 days or so. Wet the green one and wash windows. Then use the blue one to dry. Works great.

Microfiber Glass Cleaning Cloths... https://www.amazon.com/dp/B00KAJ42GO?ref=ppx_pop_mob_ap_share

I was looking for something as well. Got a charger with J1772 connector through electric company to get off peak rates. I was sure the adapter would be misplaced since it would be going on and off the charger daily.

I ended up using a french fry holder. Hang that on the wall and throw the adapter in there. Really stupid, but it works. Have not misplaced it in almost two years.

I found one at a local store for a couple dollars, but Amazon has them as well.

https://www.amazon.com/Fries-Fly-Universal-French-Holder/dp/B076DJY2G1/ref=sr\_1\_9?crid=2CVW5HQBY159X&amp;keywords=french+fry+holder+car&amp;qid=1667839931&amp;sprefix=french+fry+holder+ca%2Caps%2C162&amp;sr=8-9