This particular bite piece also has an on/off valve that totally closed it off.. the older version of the EQ has a whip style end, so you could just stick the piece right in the hose.. the new version has a glass stem, so I just added a small piece of whip hose to attach it. Great for things like gaming, or when you fill the balloon more than you can take at once
There is a 90 degree version, but the straight one will be easiest to clean J. Carp ON-Off Switch Bite Valve... https://www.amazon.ca/dp/B01MZZYYMA?ref=ppx_pop_mob_ap_share
https://smile.amazon.com/gp/product/B07FPCVLL2/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 and https://smile.amazon.com/gp/product/B078YRG9KM/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
That unit is in our avoid list in the sidebar. The plastic vapor path will offgass and kill you.
You want an all metal or glass vapor path. Try this one:
Hey there, there are a couple of ways to get started. It really depends on how much money you want to spend. It can range from free, to around 20 bucks, to maybe like 100.
For the free start go to this website and it has basic rules and character sheets; http://dnd.wizards.com/products/tabletop-games/trpg-resources
For the around 20 bucks option buy the starter set. Here it is on Amazon; https://www.amazon.com/dp/0786965592/ref=cm_sw_r_cp_apa_xNZFAbKP3Z95A
For the more expensive option you can buy the players hand book, a pre-made quest, some dice, and some miniatures. I hope this helps. It's my favorite hobby so if you have any more questions I'll try and answer them =)
Skip the edibles, buddy. Get yourself some everclear or something similar. Get it cold, you can shove it in the freezer for 30 minutes or so and then submerge your avb in that. Shove it in a jar or something with a lid and shake the fuck out of it for 15 minutes and you'll have a nice activated tincture.
Usually tinctures call for a decarb but since it's avb, you're a step ahead. Be cautious, this shit can get potent. Obv the less alcohol you soak the goodies in, the more concentrated it will be. Been ballsy enough to try and burn off the alcohol on low heat to get a quick syrupy consistency but I don't recommend unless you got good ventilation and are cautious af. Strain off and dispose the plant matter. Get yourself some of these to store tincture in. Squeeze a few drops under tongue or behind lip to get smacked. Keep them in a cool, dark place. I just like to dump them back in the freezer.
Orr.. you can go absolutely bonkers and tank a shot of the shit. WARNING: Only do this if you don't mind a 1-way ticket to crossfade county and don't have anything to do for the next 6+ hours.
It's a shame about ur edibles. I find avb oil to be on the weaker side anyways. If I'm set on making oil with the avb, I like to pair it with 2-4 grams of concentrate. Decarb the rosin and incorporate into oil. Finely grind qtr oz of avb and sprinkle it in. Hit that with 15 minutes on low heat (keep it around 200f) and you'll get some nice full-spectrum shit. Make sure to freeze it right after it cools down before use. I find that helps.
Good luck, friend.
Here is the Grasshopper Album and I'll start answering questions individually now.
Also, check out my Instagram to get instant uploads. It takes me awhile to compile an entire album on imgur but I usually upload photos instantly to instagram so be sure to follow me and stay tuned for more news.
That's a great comparison actually, I got it on amazon for pretty cheap. It's sturdy enough for this job.
This is the induction heater which is essentially all you need. Make sure it has adequate cooling, I used a fan. Other than that it needs a 12v 6a-10a power supply and a switch. Extras you can add include a voltmeter or a temp sensor.
SainSmart 5V~12V Zero Voltage Switching ZVS Induction Heating Power Supply Module + Coil Power Supply heating power supply module https://www.amazon.com/dp/B01GDVVANA/ref=cm_sw_r_cp_api_i_.VY9CbEK9H0VT
Link to case:
Photo of the case closed:
From left to right: Boundless CFX, Scales, 1 x Indica Minivac, 1 x Sativa Minivac, CFX cleaning and packing tools, CFX water pipe adapter, Grinder & Micro bomb bubbler.
http://i.imgur.com/SOvj3Hg.png - this is the direct link to the file - is that high enough resolution?
Or this - https://drive.google.com/file/d/0B0NNQ2EycLdMb1c0eWRCX3paZVpkdDVsWmxHNFAtRW52Q3NJ/edit?usp=sharing
I gave my FiL a DynaVap Phantom setup for x-mas tonight.
Got him a dual flame Blazer torch lighter with it, I use a Vertigo Glock Triple Torch OTG, have an IH for home, if he ends up liking it I'm going to upgrade him with one, as well.
Feel how you will, but you can check my post history, communities etc. This is my real account I've been using for years. The bottom line is I included 5 random stickers with the induction heater. Like I said, I buy packs of 100, this is the exact pack it came in. I really didn't intend to send any sort of messages, lol. I'll try to make sure the free additional sticker choices for future orders don't send any unintended messages.
Korlon 100pcs Car Motorcycle... https://www.amazon.com/dp/B01A6QRT2Y?ref=ppx_pop_mob_ap_share
These types of organizers are great. I found this one on Amazon for cheaper than some of the “vape/dab storage” rebrands being offered elsewhere:
I microdose and use a milligram scale from Brifit: https://www.amazon.com/dp/B07SN2BHSR
They’re super sensitive. Reading can be effected by breathing or waving my hand too close to the scale.
What you’re generally looking for is a 0.001g resolution scale.
For future reference, you can buy a pretty reliable scale on Amazon for $9. I had that exact model with me for about 7 years now and I still use it.
Yeah it’s just reclaim. You can put a few drops of cranberry extract in your water and it’ll help keep it suspended in the water and rinse away easier
Botanic Choice Alcohol Free Liquid Extract Herbal Supplements, Cranberry, 1 Ounce https://www.amazon.com/dp/B009Z8SFWI/ref=cm_sw_r_cp_api_glt_fabc_95SYM8FXC3W9GJZTPNSY
Love RBT vapes, huge collection. Splinter Z daily driver. The stempod/dreamwood are close in functionality but the temp control in the splinter units is much easier to use and more consistent imo.
They’re a literal glass canon of sorts, with amazing functionality but their design leaves them at risk of breaking when dropped. read: not a garage piece. i only feel comfortable using it in carpeted rooms. And i own so many because i think you have to accept that they will break at some point.
splinter Z TCR 160, lock ohms around .400 to .450, 55w 380F
one thing i’ve really noticed lately is functionality is dependent on how clean and clear your basket screen is. hit it with a lighter occasionally to burn off and clean it.
DNA mods were the recommended choice before but i don’t notice a big difference in performance vs price, and having arctic fox or red panda to enable autofire is extremely nice.
the cooling stems work extremely well, but you should learn the technique using a short stem
you can find the basket screens for cheap on amazon, they’re listed as 1/2in. note - there are 2 diff sized baskets being sold as half inch. one fits 18mm stems like stempod tightly and the other fits 19mm stems like RBT tightly. For RBT i have been using - https://www.amazon.com/gp/product/B081GQJW2B/
shameless plug - if anyone has a canary Z they don’t want anymore i need one for my collection :)
I just had one of these show up today! I threw it in the charger about 5mins ago. I will try to get some initial impressions up before the sale ends V2 Pro Series 7 Photo
I looked up more details on the current sale:
"Our first storewide sale of the year… Save 25% on the World's Best Vaporizers - Every V2 Pro product, including Series 3 and Series 7, is on sale. Today only. Sale ends at midnight, March 12."
I assume its EST, but not positive.
i'd order form amazon now...
i actually bought a 100 pack from ebay a few years back..
still have not had to reorder bags for my EQ.. saved tons of money buying these instead of buying 'branded vape' bags
they have different sizes also, which if you want "portable" bags you might want to look for. i have a hose that fills the bag on one end, and another hose on the oppisite end of the bag that i pull the vapor from. so it constantly refills as i pass around the other end... so bag size isnt as important to me as someone who wants to detach the bag from the unit and pass around.
Here you go op!
> Things are moving along steadily at Grasshopper. Throughout these last two weeks, we’ve finished battery testing, and selected the final version of battery chemistry. Batteries have undergone extensive in-house testing using a battery cycler, which has allowed us to compare dozens of cell chemistries from various manufactures. This ensures that we are getting the absolute best possible battery available.
> Last week, we also secured a larger assembly space, which we are looking forward to getting operational. This will allow us to complete assembly with much more breathing-room.
> Our new website is 99% complete, and will launch very soon. The minute it goes live, Indiegogo backers will be able to check the details of their individual orders, and get updates as their specific Hopper comes off of the line. Due to the huge number of backers, we are still in the process of hand-checking each order to make sure everything is correct before the site launches. Stay tuned, and get stoked!
The 90 degree is 14mm on the "Globe" end and has a tapered end that fits most rubber tubing. It looks similar to this one sold on Amazon.
I hope that's helpful!
I use these on my tetrax, splinter, and Stempod: https://www.dhgate.com/product/2019-new-cooling-rod-glass-products-free/504010639.html
And amazon Arizer EQ bent stems work. https://www.amazon.com/Chem-Si-Glass-Adapter-Female-Frosted/dp/B01M4FDUQU
I'm using a Stempod SI if that makes a difference.
C2G Replacement Power Cable For Computers, TVs, Monitors, & More - 10' Black Universal Cord Works With Any 3 Pin AC Power Connection - 18 Gauge Wire (03134) https://www.amazon.com/dp/B00005113L/ref=cm_sw_r_cp_api_fabt1_.AmUFbR0QV253
Here's the thing, to everyone else in this thread saying otherwise... It. smells. It doesn't smell as much as combusting but it definitely leaves a scent. It's not as easily recognizable to others as smoking is. Those who vape as well tend to know the smell and be able to spot it much easier than those who don't. I can sense it pretty often in bars/public now that the Pax and others alike have been around for some time.
I recently graduated college and am back with the 'rents too. It's worth it to take all the precautions you can. Here's what I do, and recommend you do.
Get a candle wax warmer. It's basically a flameless candle and will mask your room with a good scent. Shit I'll probably use these even if I have to hiatus from smoking one day. Here's a cheap one on Amazon, they're also cheap at Wal-Mart. Around $10. This is a smoke buddy. It's basically a manufactured sploof. Use those two things and your window to vent it out a little and you will have no worries. I don't even use my window.
Walmart? On Black Friday? 100% Guaranteed it will be annoyingly busy.
Here's an Amazon link. You could also try target if theres one near you.
For bags, these work really well: https://www.amazon.com/Smell-Proof-Bags-Interplanetary-Development/dp/B01IE8LV5M
I usually stick with a mason jar though, just make sure the seal isn't worn or too old. You can buy new seals on Amazon for them
What did you search for to find it on AliExpress? It's just what I want but I have no idea what terms to put in to find it.
after some googling here are a couple that look close on amazon:
$7.99 Waterproof Small EDC Fatty Pocket Organizer Tactical Molle Waist Pouch
$13.99 Orca Tactical MOLLE Gadget EDC Utility Pocket Pouch Organizer Bag
I love it too that was one of the main reasons why I got this one. It’s the Large compact camera case from Amazon basics for anyone wondering https://www.amazon.com/AmazonBasics-Medium-Point-Shoot-Camera/dp/B00DUGZDJ4
Combustion results in a lot of chemicals that aren't inherent to cannabis itself so a lot of people come to associate some of the effects of smoke inhalation with the effects of cannabis. Check out this chart showing the boiling point of different cannabanoids.
A quality vaporizer will get you just as high as smoking would, and with less material. Generally people describe the effect as being more of a head high, but you can certainly feel a full range of effects and get that couchlock feeling the comes with smoking if you vaporize at higher temperatures.
Here is my DNA profile tailored for the StemPod. The odd numbered profiles are TCR mode (set for 220 with unlocked ohms, 55 watts). You can mess with the wattage in TCR if you have issues with temp tracking. I picked a middle ground that should be easy going for most coils but you may need lower wattage to get your coil to TCR properly. I personally use 75 watts with my claptons and they track fine. But too much push can mess up TCR with some coils.
The even numbered profiles are for wattage mode.
Let me know if you have any issues with it.
Nah, not when the deal is this good imo
If you're worried about the micro usb port breaking, you could pick up a magnetic charger similar to this and still be way under the price of a USB-C version
Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!
Here are your smile-ified links:
^^i'm ^^a ^^friendly&nbsp;bot
Puffitup.com is a reliable vendor - their packaging is discreet (return label is something like six5, not puffitup)
One of the best pound for pound vapes on the market right now is the vapcap M, made by dynavap. It is the vaporizer equivalent of a one hitter, and it costs $50. www.dynavap.com
You’ll need a butane lighter - dynavap sells them. Any butane torch will do, i like this one from
I’ve owned over a dozen vapes of all price ranges. As I type this, I am using my vapcap m instead of far more pricey vapes. It’s just easy, convenient, and great for taking one hit at a time.
Don’t trust shitty Chinese rebrands - whatever you decide to purchase, search it in the sidebar on this sub first. Also pm me or really anyone. We just want to help folks medicate safety and efficiently :)
You can also now unify a bunch of your cables that use lightning, USB-C and USB Micro and instead of having 3 different cables kicking around every charging station, you just have these wicked braided cables that magnetically lock on. They’re the bomb, diggity, daddy-o.
The board came for free with points earned on a session tracking app called Strainprint. It is just a happy coincidence that the stems fit. My weed container also fits exactly in the spot they designed to hold a grinder. I'm happy with it especially since it was free. If you're interested here is a link to the app, https://play.google.com/store/apps/details?id=com.ionicframework.strainprint
I was randomly at a camera shop and found a lens case that perfectly fits my grinder, charger, solo, two canisters of herb and abv and a slot for both stems. And it was like $20
When I get home i can post a link, but I forgot the brand so I can't find it right now
Edit: it's called a NXE Matterhorn
Don't have any pics of the solo in it right now but there's enough room for all the stuff you need with the solo
Maybe I'm completely wrong but I wasn't aware that "diuretic" implies that it displaces more than you put in no matter what. From what I understood, watermelon was like coffee or tea in that it possesses some diuretic properties, but overall, contains so much water that it offsets the diuretic part and overall hydrates you quite effectively.
Webmd above for the coffee and tea thing. I don't even know what we are arguing about anymore lmao. I'm sorry for being aggro, I genuinely don't care and I genuinely mean it, I'm gonna go smoke a bowl. Have a nice day. Peace!
I did get the glass, and its actually my favorite glass piece to use with my Grasshopper, my biggest complaint is that it can't fit the Evo natively. However I got a bunch of glass fittings so that I could make it work: Photo
Can they make changes to the glass? If they could just extend the GonG like 1/2 inch out. Because with the adapters it now holds the Evo, but it's very tippy. However it does work very well, I actually prefer it over my much more expensive OEM Hydratube when I use the Evo with concentrates.
Thanks for the compliment, the video I released today was the first one with my new camera, it took a while to learn after coming from a 100% auto everything GoPro, but I am really striving to keep improving as much as I can.
My new favorite way is too mix the ABV with these yoghurts, the kinda crunchy flakes perfectly mask the taste and texture
Its legal, they are made for tobacco and legal herbs like mint and tea remmember :)
Look at how ambiguous vapeworld keeps their linkedin page :)
I've had mine abut 3 weeks now and it's been pretty much all I've used.
A single can of butane will last you months, just make sure you buy high-quality, triple-refined (at least) butane to keep the plate cleaner and the lighter functioning. You might have you refill the lighter once or twice a week depending on your frequency of use.
The torch included is perfectly adequate, and the sleek one certainly isn't worth $10 more than the basic. You can also pick up a few extras (or alternatives) from DealExtreme or FastTech, the same one they sell with the Lotus for only $3 and free shipping, though it will probably take a couple of weeks since they'll ship from China.
The J Hook is really nice and much better than the aluminum stem for use at home and for initially learning the technique since you'll have visible feedback - the aluminum stem is only really necessary if you're going to travel with it.
From the video it looks pretty nice, well built. NOT ELEGANT,It looks,probably feels nice in hand, solid but not attractive at all. The crusible/chamber door sounds nice when hes latching and un-latching it. Good thing this thing has a phone app because it looks confusing and annoying to change the temp on the device. The design leads me to believe it vapes really nice though. I don't mind the crusible so much (especially if there's that cool cary case for them) except for the top dose not latch down, I would lose those all the time. I think I am going to wait for some people in the wild to get the vape and see what they think. The whole process of loading it,changing the temp and the buzzzing made me appreciate the grasshopper more. too bad I don't have good luck getting a working one,but I got another replacement today hopefully its good for a while. Video was a little sales pitchy but my bullshit alarm did not go off like some of the firefly 2 vids he did(https://tinyurl.com/yd5hpzwh)
Here is my DNA profile tailored for the StemPod. The odd numbered profiles are TCR mode (set for 220 with unlocked ohms, 55 watts). You can mess with the wattage in TCR if desired, I picked a middle ground that should be easy going for most coils. I personally use 75 watts with my 8 wrap 24/30 claptons. The even numbered profiles are for wattage mode.
This one has been working for me for over a year now, I use it daily with the dynavap.
You could maybe use these to protect your fingers.
You can use the stand to keep your bubbler upright. I don't have that vape but thought this would be helpful. Good luck. 👍
The beads are retained by a wire retainer (very easy to make) that stops them from going through the lamp base holes. The o-rings are Mr O-ring #111 and M3x12 , in 70A durometer Silicone. These are rated to about 200c which is within our temperature tolerance in this build. Still on my first set, and have not observed any issues so far.
Came to see if someone recommended this. 👍This is the answer IMO.
Vertigo Serpent Single Torch Flame Table Lighter - Black Matte https://www.amazon.com/dp/B075M1W5RC/ref=cm_sw_r_cp_api_glt_fabc_CPQEEXZ05G1G4M65GCYP
Jssmst Locking Medicine Box - New Version Medical Box with Drugs Storage for Home Use, 11.4 x 8.1 x7.4 Inches, New(MC14020) https://www.amazon.com/dp/B07W5MCFB5/
Seals well, no smell. And says First Aid on it too!
I bought one like this a few years ago for microdosing shrooms: https://www.amazon.com/dp/B08D96M2PV
Believe it or not, low dose shrooms are good for pain management for me. I just don't like taking any pain killer or sleep aid more than two days in a row.
One thing I do to make it more accurate is to place a heavier container as the cup. Using light containers allowed too much fluctuation.
This is a good way to ask this question. Have you looked into the Elev8r as an alternative with similar results. I had to upgrade to a larger torch, this one specifically,, and it’s awesome!
Portable Mini Pocket Toothpick Holder with 10 Pieces Reusable Titanium Toothpicks Waterproof Toothpick Case Toothpick Fruit Picks with Keyring for Outdoor Picnic Camping Traveling Supplies https://www.amazon.com/dp/B08YYT7PXD/ref=cm_sw_r_cp_api_glt_fabc_G0CB742TENT5ACD3BTEH
Check these out. If you need them longer just search for titanium toothpicks. They work perfectly.
It is an Airtight Pill Container I got off of Amazon. It had 3 sections but I removed one. I keep ground bud in the top and AVB in the bottom. It honestly works great and holds maybe 3-4 bowls worth of bud. Even more if you keep the third section!
Was thinking of getting a cork base, trying to figure out what sizing would be best. I like the idea of the clay adding another cooling element but would have to tape it or something to make sure it doesn’t knock the glass, which may cut down the cooling effect of the clay. The cork would definitely insulate it but would protect it better I think, so maybe I’ll try both.
I use this for my globe and other whip pieces. I place globe in middle of wife n I with debowler in one cup holder and herb jar in other with flowerpot on my side of bed that reaches the globe easily. This is the way I get really lazy but still want to have a good hard sesh.
This is probably overkill for your needs, but I wanted help in clearing the air in my smoke area, but also my environment is also very dusty...so there's a two-fer in play for me.
The only thing I'm not crazy about this unit is the removable and washable pre-filter sleeves look like they will be difficult to get looking clean and uniform, even after laundering.
It's also whisper quiet on the lowest setting, yet still does a good job lifting the dust out of the air. Where I used to need to dust my blinds and desktops a couple times a week, now once a week is sufficient.
I have this and love it.
I just found out about these when fermenting sauerkraut. They fit any wide-mouth jar and you pump the oxygen out and lets gas exchange without letting oxygen in. I'm using them for curing right now. So far they work great!
For sure, you just need to get a fish tank air pump. It's a tiny little box that pumps air without adulterating the airpath. Should be cheap, and it's basically what the herbalaire uses.
Something like this:https://www.amazon.com/Uniclife-Aquarium-Outlets-Accessories-Adjustable/dp/B01EBXI7PG/
$20? I would say for $20, no, not at all. I got mine off Amazon for below $10, and I think that was a fair price. Here is a link to where I bought mine!
They're Polos. You can find them on Amazon. I'll edit in a link when I find it.
I'm kinda mad you can get them for $40 less than when I got them though.
Edit: Just noticed I forgot your other question. I'm not really sure what you mean. Do I pack it for myself or for group use? I bring an extra battery with me and my grinder so I can always load more if I'm sharing.
The grinder I use most often was only $7 from Amazon: https://www.amazon.com/Elink-Earth™-Grinder-Silver-Handle/dp/B00W07GFD2
It doesn't look or feel as nice as some more expensive grinders I have, but it's solid and grinds well for vaping.
I can only see flair in comments as I am on mobile. I was going to say you can pickup a new whip from vapexhal. I found this one on amazon that may also be worth checking out.
I got this for $35 off Amazon and it's a godsend. I only saw one other user mention this device a year ago so I thought I would remind people about it. Right now I have it set up to turn on my Cloud Evo 20 minutes before I wake up, as well as 30 minutes before I head home. I can turn on and off my Evo from my phone at work if I forget to turn it off on my way out the door.
If you have a Volcano, Evo, or other desktop that takes time to warm up and you're a daily vaper, I highly recommend.
Link for anyone interested
PSA You can buy a box of replacement toothpicks from Amazon, they are $5 for 800 and qualify for prime. Fancy-Ass Toothpicks
I love my SB Jr too! Enjoy...
I use this one and this one. Those are Amazon links, but I found both of those locally.
Got into 3D Printing a few weeks ago (I blame /u/delta3dstudios) and picked up a Monoprice Select Mini v2 from Amazon. It has a limitations but for a cheap 3D Printer it's an excellent beginner one. It prints right out of the box with just a bed adjustment and supports PLA and ABS filaments (I have a bunch from 3D Solutech in the blue boxes). I printed a new extruder and now can print TPU and other soft filaments. I think I've put about 30/35 hours of solid printing since I've picked it up. I've also setup OctoPrint, a camera for recording and some additional automation.
I don't know how many times I sat and watched the thing print chilling with my Solo II losing track of the time. I'm starting to outgrow it already, wanting to print bigger things. I'm currently building out my shed, will probably upgrade to a model that does multi-color/filament with a bigger bed afterwords. Already I've printed mounts for my telematics/dashcam system, a bunch of random parts and all kinds of neat little gadgets.
What a time to be alive. Now where's my damn flying car!?
I'm interested in this. I saw an off brand vape compatible stem for sale as "chemistry supplies", but the reviews were really bad. Curious if there's anything worthwhile. Due to my purchase history, Amazon mainly suggests gardening supplies and computer parts, so I don't know the breadth of vaping supplies available.
Edit: Gave a shot to see what I could find. I'm horrible at picking keywords. This is the highlight of my brief search.
I've tried several, and my favorite is Vertigo Cyclone:
Unlike most on Amazon, reviewers don't seem to have a problem with it suddenly pooping out. You can see the butane level. And three torches means quick heating.
If you're concerned about the CFX screen brightness, you can pick up a pack of static cling "dimming" sheets on Amazon for cheap. Cut them to size and place them over the CFX screen.
I got them on Amazon but it seems like they don't have the old ones.
Or online from Amazon, with a butane refill.
It's worth all the hype it receives.
It's not the most modern looking or feature riddled as newer vapes, but what it does best is consistently produce lots of tasty vapor with absolutely no learning curve or technique.
Get the dosing capsules. They keep your vape 1000% cleaner.
Extension cord. The charger is the only weak part of the device, and I replaced two chargers before realizing a pack of these is way cheaper. All the wear and tear will occur on the extension, and the charger will last much longer.
Appreciate the info guys. This look about right for the job? Japanese Organic Cotton Sliver 13 Feets 100% Organic Unbleached [Made in Japan] (1 Pack) https://www.amazon.com/dp/B079QH8TLJ/ref=cm_sw_r_cp_api_i_K-CdFbGABJ5ZQ
You missed one of the best... https://www.amazon.com/Honest-Butane-Lighter-Tobacco-Window/dp/B07CYW8FZ5?th=1
This thing has been the only one I've needed since the day I got it. Lights perfectly every time.
I Think there are some online like this "Download free STL file Boundless CFX / CF Loading Funnel • 3D print template ・ Cults" https://cults3d.com/en/3d-model/tool/boundless-cfx-cf-loading-funnel
If you have your own printer I doubt it would be hard to make your own
Looks like if the herb is not flushed of N then you get more ammonia.
You will likely have to wait 4-5 weeks to receive a vapcap as I believe he is still quite backed up on orders. Definitely still get one though, its a great vape and also an awesome backup device. Your Pax2 may still be returned to you faster than the cap arrives.
You could look into making a DIY MFLB Just make sure you read everything in the tutorials extensivly and make sure you use only safe materials. :)
I love you! I was just looking for the last 15 minutes and couldn't find it haha. Thanks for the link :)
Edit: here is the instagram version I originally saw
There ya go! Now we just need to get you to introduce yourself over at /r/dogecoin so you can join our cult lol. If you want to transfer the ones you have to a more secure place eventually, you can download a wallet to your device and send your coins there too.
+/u/dogetipbot 1001 doge
Yep, La Mémorial des Martyrs de La Déportation can be seen at the very tip of the island, it is the bit of white. Extremely powerful space that is invariably empty because so few people go around and behind Notre Dame. One of my 'must-see' suggestions for Paris.
I don't know offhand. On Black Friday, I paid $70 for the Sutra, and another vendor had them marked two for the price of one. Two for one is kinda a dumb way to sell vapes, LoL, but there it is.
Here is a Hippie Rebel for $85:
I don't know anything about either of those sites, they just popped up on google.
There are many sales and coupon codes floating around, just look under a few rocks and you will probably end up with a good deal.
I am not 100% about that. http://www.vaporseller.com/arizer-solo-portable-vaporizer-latest-edition.html is the link without all that nonsense after it. However, this looks legit. https://www.trustpilot.com/review/www.vaporseller.com
NP check out the FC thread on the eco if you get one. I forgot to mention a neat part of the eco is the MP functions as a 14mm gong.
https://giphy.com/gifs/3oxRmoFKC9pyGMS5oc It can surprisingly milk a piece pretty effectively.
I own both, after modding the eco lightly it produces thicker vapor, faster and the heater has less recovery time between hits. That said it doesn't taste as good and the hits can be awfully warm due to short airway. The solos seems to be a little more efficient. too.
I hope you didn't pay much for the eco, I got mine for $26 on dhgate. I got it solely as a knock around vape for when im out and about but I was pleasantly surprised. The MP fits 14mm glass (as long as its not deep recessed joints) natively and can milk up a bubbler nicely. All in all its the nicest Chinese vape I've owned (vax, t2, fm5), certainly not my daily driver but a great entry level piece or backup.
You'll like your solo too, its a very tasty simple and versatile vape. I still use it for lower temp sessions when I'm in the mood. Here's a .gif of the eco in action, you might be surprised. The mod I did was just cover the excess holes above the heater, I go into more detail on the FC thread. https://giphy.com/gifs/3oxRmoFKC9pyGMS5oc
Yeah, fits pretty great. $20. Ordered it last night. Love or hate Amazon, that really worked out. Akro-Mils 09514 ProBox 14-Inch Plastic Toolbox for Tools, Hobby or Craft Storage Toolbox with Removable Tray, 14-Inch x 8-Inch x 8-Inch, Red https://www.amazon.com/dp/B00017IPLS/ref=cm_sw_r_cp_api_glt_fabc_J88H94DF3H4WJFMK7X82?_encoding=UTF8&psc=1
I was also looking at old timey wooden tool boxes from Etsy, but they were bad fits and expensive
The actual food safe 3/8" OD silicon whip is from Amazon, the folded stub is from the stock Plenty kit and the red rings are 1/2" OD O-Rings are also from Amazon.
First get the obsidian and glass magma from:
Then get this adapter that will go onto the obsidian and connect to the magma on top
2 Pcs Glass Tube Adapter 14mm Female to Male 18mm Essential Adapter https://www.amazon.com/dp/B088FB4BC6/ref=cm_sw_r_cp_api_glt_fabc_MV6TPBQGWFEV3BC8FNTV?_encoding=UTF8&psc=1
And you’ll have the same set up.
I love these guys for Dynavap and Stickybricks: https://www.amazon.com/Honest-Butane-Lighter-Tobacco-Window/dp/B07CYW8FZ5
for Dyna i turn it on its side to get a wide flame and on the Stickybricks you can shoot the flat flame at an angle so it covers the intake. I get huge rips unrestricted on all my bricks. Also great on lotus more heat less focused burn.
I use this hard case. It's not a "smellproof" case but It fits the TM with the grav upline stem in perfectly. You can also fit another battery or something in there's.
A tip I saw on the Volcano subreddit, and have enjoyed, for holding bags was to use those broom holder things. Works like a charm!
I have these magnetic shelves in my locker. As well as these jars
That’s a great cooling attachment! Try one of these with it for better ergonomics too (I use the same setup):
The 6mm version of these work better than anything else I've tried:
They're a bit pricey, and I have no need for 1000 of them, but I haven't been able to find anything cheaper online.
The fact that you can put the beads inside the regular mouthpiece makes the vape one of the most discreet out there. For those living in illegal states/countries, this mod essentially makes the vape look like a standard nicotine vape and cools the vapor.
The BB9 dynavap stem is also a fantastic option, because it also works as a waterpipe adapter.
And just put the screens that fit in the elev8r bowl in there.
The one you linked too should work just depends which is smaller for microdosing. No basket screens needed though.
This is what I used and have been happy with it. Seems food safe. https://www.amazon.com/gp/product/B075LP6ZGC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Btw, I never use the cooling unit (I only use the mighty with a bong) bc i hate cleaning it.
With a water pipe adapter, there's much less to clean and dosing capsules help a lot.
I bought filters from amazon. There's also a smaller size metal screen which is used with the stock cooling unit but fuck that thing.
The tiny bottles below can be found at a dollar store for something like 10 for $1. I like them because if I loose one, they are cheap enough to replace. They hold just about 1G of ground flower.
try this style lighter unrestricted, I prefer Junior and Runt to OG personally. In fact like Junior so much I have 2.
Never seen just one being sold