What are
/r/paintball's
favorite Products & Services?
From 3.5 billion Reddit comments
The most popular Products mentioned in /r/paintball:
The most popular Services mentioned in /r/paintball:
Flickr
Thingiverse
Alibaba.com
eBay
DealExtreme
TinyPic
Amazon
Dropbox
Cults.
Adblock Plus
Coub
Amazon Drive
Snapchat
Instructables
The most popular reviews in /r/paintball:
They make extension belts that are universal to velcro pod packs.
https://www.amazon.com/Exalt-Paintball-Harness-Extender-Extension/dp/B07KK2ZJNB/ref=sr_1_4?dchild=1&keywords=paintball+pod+extension+belt&qid=1620157647&sr=8-4
Thats what I would reccomend. Id say try a pack first, make sure he can get it up on his back so it doesnt bounce too much and then if it doesnt fit, order an extension belt.
Here’s the link: NINAT Tactical Paintball Mask Airsoft Masks Full Face with Lens Goggles Eye Protection for CS Survival Games Airsoft Shooting Halloween Cosplay Safety Mask Black Green Tan Grey https://www.amazon.com/dp/B07SS6VW95/ref=cm_sw_r_cp_api_glc_fabc_Ph6aGbNTK15N3
It’s a $20 mask, says at the bottom:
“Pay Attention:【Style of lens】withstand 310FPS within 5 meters of airsoft shooting. If higher than this standard, necessarily wear ANSI Z87.1 impact rated goggles in airsoft to protect eyes.”
Protection should not be standard to limits of 310 FPS from an airsoft pellet. This is nothing in comparison to paintball.
To use dogs as a comparison: you’re trying to protect yourself with a Yorkie when you could be protecting yourself with a pit bull/ or even a Great Dane at least.
I got one of these, and it's literally maintenance free, gets up to 4500, then auto stops.
https://www.amazon.com/gp/product/B0819ZH85H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I believe you have a "fear" of failing rather than getting shot. Am I correct? In that case I will tell you not to go on to the field with the thought of doing good or the fear of doing bad. When you are on the field only the thought of playing paintball should be in your mind. If you think about being good your overconfidence will move you into a position too far forward and quickly be flanked then shot. If you think about failing you will stay back and ultimately be shot anyways. Therefore go on to the field with only the thought of painting the opposing team. Let every plan be dynamic; don't just shut down when you run into opposition, change the angle get the shot. Shy away from what is strong and attack what is weak.
And I do strongly recommend you read The Art of War and The Book of Five Rings even though I got downvoted to hell the last time I said "read" in this subreddit. If you have any doubt reading can help you in paintball just watch my videos.
Wear mirror lenses, or those new Dye lenses (Northern Lights, Blue Ice, the clear but kinda-tinted lenses) Seriously, they look 10x better in photos than normal lenses.
You can also play like a pro and spill paint/fill your hopper early so there's extra paint flying everywhere. It looks pretty cool if you ask me.
Parts List:
- Inception Designs FLE Body Kit custom anno'd in Dust Gold/Glossy Black
- Inception Designs Fang Trigger (Red)
- Deadlywinds Hair 45 Valve
- Pops ASA On/Off
- Exalt Aluminum Safety (Red)
- Exalt Aluminum Back Cap (Black)
- Covert Clutch Hexgrip
Printed with a 3D printer using PLA plastic.
If anyone else has a 3D printer and an Empire Sniper, I made the stl available on thingiverse.com for downloading.
EDIT: Some additional pictures for comparison. I couldn't add them to the album because I uploaded when I wasn't signed in. =(
If anyone wants the STL to print one of their own, I've posted it on Thingiverse.
http://www.thingiverse.com/thing:449685
Don't have a 3D printer? Maybe someone near you does. The print is 4.93 meters / 15 grams of PLA or ABS plastic.
a) Speedball.
Just a suggestion, trying using an automated online survey tool. It's easier to answer and will automatically compile your results. I usually use Survey Monkey
I just have a big generic o-ring kit. The o-rings are color coded, so once you get them successfully changed once, it’s super easy to change any of them out in the future. I bought this one: Captain O-Ring Players Kit Large Color Coded Master Paintball Oring Kit - 18 Sizes 360 Orings https://www.amazon.com/dp/B00GRICJ3U/ref=cm_sw_r_cp_api_glt_fabc_PWK80CGF2P2P0W1MF24X?_encoding=UTF8&psc=1
10-32 UNF x 0.5” cap head screw
It's in the manual under the gamma core parts.
Amazon link to one that should work. https://smile.amazon.com/dp/B07D5VC7SR/ref=cm_sw_r_cp_apa_glc_fabc_K7Z63NYGV30KWEW0WEQW
Beginner marker, emek.
Here's a guide I wrote that has more options or things to consider for getting into the sport.
https://docs.google.com/document/d/1D8XTLBPDGWpdWSHqygF7vvGLROz4c68TWf4RHBaxE7A/edit
Hope it helps.
I would advise against a carrier for pods and just get a regular pod harness. If you're going to do magfed, then a carrier is fine, but honestly a pod harness will do you much better. But if you do go that route, there are molle pod holders such as: https://www.amazon.com/MOLLE-Tactical-Pouch-140-160-Waterproof/dp/B06XPVZ3D8
I get the feel of wanting to be like woodsball commando. And I started out that way too, but honestly in the end of it, get paintball gear for paintball and just play paintball.
The exception being some pads and foot gear can be any other sport. (Literally do not buy paintball specific cleats or shoes.. you already have good boots but if you want cleats later, just get football/soccer/lacrosse cleats)
I got a small, concealed carry backpack that just goes over one shoulder from Amazon for this very reason. You can carry extra pods or mags depending on how you play, or you can just plop a huge air tank and/or water bladder in there if you want. Mine is kind of like this one: https://www.amazon.com/G4Free-Tactical-Military-Shoulder-Backpack/dp/B07JFCYYFD/ref=sr_1_2?dchild=1&keywords=concealed+carry+backpack&qid=1614194162&sr=8-2
I've actually worn it on top of a tactical rig before without it feeling too uncomfortable or cumbersome, and it could be hoisted out of the way of a standard pod pack as well.
Gotta break it in a bit but works great.
Cat crap. It’s sold at Walmart or online. Me and several other guys been using it for years.
https://www.amazon.com/EK-USA-Multi-Use-Anti-Fog-Spray/dp/B072Z7M7RX
They also sale it in a spray, but I find this works better.
Also if you can wear contacts, that’s the best option there is.
If you're set on looking for vests, Tippmann makes one, as well as RAP4 (but I personally don't know about the quality).
The vest I use, I got off amazon Link
I have been using that for 3 years and I love it. Fully adjustable for all kinds of sizes, as well as being molle on the back so you can switch out and put anything you want on the back. It has 4 Pod holders on the back, and a Tank Holder in the center, as well as 4 additional pod holders in the front. The front however, only has 4 pods that are sewn on and cannot be replaced.
There is also a velcro pouch inside the back of the vest where you can place a hydration bladder in it. vest in action
I'm not going to lie, vests are for the most part heavy. If you want to run a remote line they're very useful because most of them include a pouch that holds the tank as well as several pods. If you just want a rig that holds just pods, I definitely recommend those pod-holders that wrap around your waist.
They're definitely on amazon. You should buy local if you can. Of course I'm a hypocrite because I couldn't find one local so I bought mine online.
Here's an example of a fairly decent deal - upgraded Ion with tank and hopper, buy it now for $320.
Torrid Paintball in Clarksburg is open year round (barring significant snowfall) but only do private groups. I Referee there and play on their recball team. There's a Groupon available as well.
Paintball Sportsland in Libertytown is also open year round (not sure on their snowfall policy) on weekends and take walk-ons. They also have Airsoft.
The photographer did an insane job. This is just one of the many pics he took that day gallery if anybody is interested in seeing all he took that day
a fresh set of any of the following can be nice to have: pads, pods (can never have too many of these, buy in bulk), pants (careful with this one, they vary in quality quite a bit and many players swear by only one or two particular brands), mask lenses (bonus points if you find cool tint styles) , pod packs (actually breaking these in can be a pain. only go for this if his pack is borderline falling apart).
Or maybe something like a shiny new Gear bag. Or maybe hard carrying cases for his markers.
but yeah, This sport has a really fucking high ceiling for gift prices. if price wasn't an issue, i would point you to something like a CM Buzzard or CCM T2
Obviously you can get them in whatever colour/colour combo you can imagine. But yeah, each of those in in the 600$ price range. But if it were me in his position, I would love to see a care package of pods/mask lenses/soft gear to replace my old stuff.
I would get him:
SAE and Metric ball end allen key sets.
Autococker valve tool, which you said he has.
Sheridan valve tool.
12pt 1/4 socket. 1/4 drive. To remove cocker ASA screws.
Small hook and pick set. For removing O-rings.
Flat and philips head screwdrivers.
Crescent wrench. Apply duct tape over teeth before gripping.
Duct tape
Electrical tape
Blue loctite
Teflon tape
Ziptie set
Universal O-ring set
Gold cup oil.
These are my recommendations from experience, since I was also the go to fix it guy in my group of friends. I used to carry all of this in a small hobby tool box.
Edit: Almost forgot. A razor blade to cut macroline hose and autococker pneu hose. For the barbs, a set of mini SAE wrenches. Like these:
Eclipse Tools Wrench Set Mini Combo SAE 10 Pc https://www.amazon.com/dp/B0015A3KQU/ref=cm_sw_r_awd_tUFgub0GD8JNW
Regarding the strength.
ABS has a yield strength of ~6000 psi.
Assuming we take a 50% efficiency due to 3d printing, we are at ~3000 psi.
We can approximate the shear strength using the Tresca criterion.
3000psi * .5 = 1500 psi shear strength.
Worst case scenario is that the bolt is blocked and the ram is pressured at 100 psi. This would result in a force of about 95 lbs depending on the diameter of your ram.
The diameter of the pin is .25 inches, so the stress, at 95 lbs, would be 121 psi. This is within a factor of ten below the critical shear stress.
Please check my math.
. 68 Rubber Paintball / Rubber ball for Police / Military / Sport / Games
.68 is the caliber of a paintball gun. And if it doesn't break on impact, it is reusable.
Like other comment stated, it’s leaking from that fitting. I wouldn’t bother trying to fix it, that’s a super low quality fitting. You need something built and designed specifically for this application, unless something else you’re using states it can hold pressure up to 700-800 PSI in some cases.
Paintball Macroline Fitting - 90... https://www.amazon.com/dp/B001VRFV0A?ref=ppx_pop_mob_ap_share
These guys swivel so you don’t have to worry about where the fitting ends up once it’s fully seated. Comes with Teflon tape already applied.
The FPS issue will happen when you have a leak. Because your regulator isn’t capable of reaching its desired pressure, (I.E. it gets to 300 PSI then leaks, when it’s suppose to operate at 600 PSI for consistent shots)
I’m not sure how familiar you are with paintball markers, but if you’re still having FPS problems after getting the leak sealed up, you might need to dive in deeper.
Powerex Low Self-Discharge Precharged 9V(9.6V) Rechargeable NiMH Batteries (MHR9VP), 1-Pack https://www.amazon.com/dp/B01FV0U5WG/ref=cm_sw_r_cp_api_glt_fabc_38DG7YP0Y2WECRA8G638?psc=1
That’s the one you want.
I also just fixed up my old e99.
I'd use one of these universal sling straps and a single point sling.
There is cheaper ones but require lots maintenance and looking after. There is also some cheaper ones with some risk but they work like other have said but slow. Scuba tanks with adapter would be best bet but you won’t get a 4500 fill which is fine , forget what max for scuba is but it’s not that high.
https://www.ansgear.com/Umarex_Readyair_Portable_Air_Compressor_p/umarexreadyaircompressor.htm
High-Pressure Electric Air Compressor Pump 4500 PSI 30 MPa 300 BAR High Pressure System Rifle PCP Paintball Fill Station for Fire Fighting and Diving (30Mpa) https://www.amazon.com/dp/B083WMTB2H/ref=cm_sw_r_cp_api_glt_fabc_6875WJ2ZF6X18X70CXNF?_encoding=UTF8&psc=1
I believe this is the thing my buddy owns, works good in a pinch. Plus it’s a good workout
I was looking at something like this one : https://www.amazon.com/Visionking-Rifle-1-25-5x26-Riflescopes-Hunting/dp/B00GH2QCOS/ref=sr_1_23?dchild=1&keywords=rapid+view+scope&qid=1625671657&s=sports&sr=1-23
fairly basic but works fantastic, I'm using a similar (but higher quality) scope on a Marlin 44-70 and love it.
Thanks by the way!
One option would be to affix something to the barrel rather than trying to add anything involving the gun's air hose.
This type of barrel clamp: https://www.amazon.com/dp/B07L5LRCVP/ref=cm_sw_r_cp_apa_glt_fabc_EZ76NZ0GWYY76G7G4GM2
...plus a picatinny-compatible foregrip like this: https://www.amazon.com/dp/B094G6LMHS/ref=cm_sw_r_cp_apa_glt_fabc_7D12VM5QRQ09H7RS6F10
...should work pretty well.
It is the Covert Clutch Hexgrip . Feels quite nice, have one on my gf son's 98 custom as well and they make a world of difference!
​
Thoughts on this? What "tier" would that paint be
I recently came across RunCam Scope Cam.
I've seen it mentioned before but it looks solid for a marker cam. They also sell go pro clones for half the price of the name brand.
Also, either way, I would do the restrictor o-ring mod on the Infinity drive. Buy a pack of the o-rings below and put one on the middle o-ring land on your keg (the one with the holes in it). Then up your dwell to 14. This slows down the bolt a little and makes the shot more of a push than a snap. It's not bad stock, but for $5, it's worth modding.
https://www.amazon.com/gp/product/B07Z9HHWGT/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
https://www.amazon.com/JT-Spectra-Proshield-Thermal-Paintball/dp/B06XD2LSTF
These are what I was referring to, it’s basically a hard plastic version of a Proflex, which is itself a flexible rubber.
As for the helix’s, I think its a combination of a lack of ventilation and foam. Its the rental mask for a lot of fields tho so, take that as you will!
It's just a QD cup that mounts to pic rail. They are made everywhere and I'm sure there are some chinesium knockoffs on amazon that would work.
Please post a link to the least expensive, in stock, new LVR you can find online. ANS, Amazon, and TMG have LV1.1s for under a grand. I'll even get you started.
I think what you are saying is that you do not want to play at a paintball field, but instead play with friends in a backyard or something. The best way to get a lot of CO2 for something like backyard play is to purchase a co2 tank from Amazon. You can get these refilled for like 5 dollars from dicks and they will run you about 1000 shots in a tippmann gryphon.
If you are using the JT 90 g cylinders, those are a terrible value and you should probably never buy one again.
Also for paint I always reccomend D3fy Level one practice.
I just bought this one in bright red for $55. Reviews on amazon aren't the best, but across the net they seem fine. I like that I can carry everything as a backpack. I can't stand dragging a roller bag through gravel. It should arrive on Thursday.
EBay has detailed images FYI.
https://www.amazon.com/Fox-Outdoor-Products-Recon-Gear/dp/B01FT34Q3O?th=1&psc=1
If you want to cheap out, you can buy knee pads that aren't specifically for paintball on Amazon for cheaper than any pair of paintball knee pads. I play the snake and am diving constantly, and this pair of knee pads I bought have done just as good as a job as any paintball specific knee pad I've had (GI, Empire). https://www.amazon.com/gp/product/B01L379FOA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
As for elbow pads, you'd have to look at paintball specific ones as far as I know. Most people like Exalt and PE elbow pads.
Oh wow you started young! The Exalt Barrel Maids are a little bit better of a barrel-swap, i'd recommend that over what you have now. You can probably get them at your local paintball store or here on amazon https://www.amazon.com/Exalt-Paintball-Barrel-Maid-Swab/dp/B008Y1PJBW/ref=sr_1_2?keywords=barrel+maid&qid=1553995619&s=gateway&sr=8-2
https://play.google.com/store/apps/details?id=lv.pbresults
In demo mode it lets you make games for practice this is the same software used by the nxl. You can start a game with your phone headphone jack plugged into your computers mic Jack and record the audio. Idk any other way to get the sound file. It's thier product so it's kinda illegal to share.
Mechanix Specialty Vent Gloves. Available in a variety of colors. My hands sweat easily, and these have some good breathability.
https://www.amazon.com/gp/product/B075P4CG9T/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
I usually use gorilla grips, but when I need something tougher I use the mechanix vent.
Not sure I'd want a used mask in the age of Covid... or would trust a used lens any time.
Thankfully, that Helix takes Vents/Empire lenses. https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/Empire-Paintball-22228-Mask-Lens/dp/B00M1SIG3M&ved=2ahUKEwj2zOr70P3rAhWBdd8KHTV3CKEQFjAAegQIAhAB&usg=AOvVaw1KTBU2I1XBN6K8Ht_a0Nni
Love your username, btw.
Thank you for the response. That looks just like it. I have a virtue board (not sure if there is more than 1 kind - gun was given to me). It's definitely a 2 prong.
I was ignorant and bought one off Amazon thinking they are all the same size, but the white box was too big. https://smile.amazon.com/dp/B07X7VXMD9/ref=cm_sw_r_cp_apa_fab_nM4EFbEAFRQY6
The Ion should still hold up very well, just give it the routine maintainence that it probably needs after not being used in so long. I don't know the exact condition of your tank, but the best bet would probably be taking it to a paintball shop and having the employees assess the reg/leak. If you plan on really getting back into the sport and playing a lot, a new HPA tank might be worth it. As far as the hopper, I HIGHLY recommend the Dye LT-R ( https://www.amazon.com/dp/B06VT4T4JW/ref=cm_sw_r_cp_apa_OLaMBbTGHG5HY). For $100, it performs outstandingly. It keeps up with my 15-20BPS (Empire Axe) with zero issues. Dye basically took their Rotor, removed some bells and whistles, and kept the core design for a very good price. Check out the reviews.
From what I have seen, for a Carbon Fiber tank that runs in this size, the closest thing to your price point is probably Empire's. It's $140 (a little over your request), but still pretty good.
https://www.amazon.com/dp/B0052F61TW/ref=cm_sw_r_cp_apa_crtMBb9ZME44V
I have bought this exact model for paintball... Sounds like you have gotten a lot of replies, but here is my 2 cents... get the warranty. Mine filled my 4500 psi tank 2 times then died. Luckily I was still in the refund period. I did a little more research and found that everyone (paintballers, scuba divers, airgun shooters) that gets a little more serious and wants to fill their tanks all use this one $300 Chinese model air compressor: "Yong Heng" ... it looks alittle scarier on the outside and it has tubes for water cooling (you add a bucket with water) but everyone says its the best cheap compressor. There are tons of videos on youtube about setting them up, its easy if give it a shot. I got mine on Amazon but seems like the manufacturer is on AliExpress because I later I found all the parts there. Just be sure not to get a knock off.. there are many counterfeit Yong Heng compressors out there. Here is a link to the one I got on Amazon that is working great: https://www.amazon.com/Pressure-Compressor-Auto-Stop-Electric-Paintball/dp/B07RWZB52G/ref=pd\_lpo\_1?pd\_rd\_w=epQdt&content-id=amzn1.sym.116f529c-aa4d-4763-b2b6-4d614ec7dc00&pf\_rd\_p=116f529c-aa4d-4763-b2b6-4d614ec7dc00&pf\_rd\_r=FST...
This one takes about 12mins to fill a 68/4500 16 or so to fill my 90ci. You still need extra filtration like others have said and it runs a little fish tank water pump with water to cool it. I've had mine for like 2 years now and it's been great to have.
https://www.amazon.com/dp/B07WVXHX17?ref=ppx_pop_mob_ap_share
Nerf hyper rounds are what I’ve been using the working loaders whether they be gravity fed or electric as well as the eyes on my SP RSX read them perfectly!! hyper balls
I'll add on to the analogies just cause the mental pics are hilarious
Imagine taking this to the golf course!
That said, that doesn't mean you can't have fun with it. There's been plenty of times playing casually I've messed around and my fields have been fine with me doing it, can't speak to other fields though
Don’t spend triple, consider the Proshield!
https://www.amazon.com/JT-Spectra-Proshield-Thermal-Paintball/dp/B06XD2LSTF
These new ones look just like the Proflex, but the bottoms are rigid instead of flexible.
I have This one and so far it's worked well. I've filled up my 77ci and 80ci tank both to 4k with it. I added two extra water separators to the little dinky one that it came with, so I'm about $300 into it so far, but it seems to be holding up just fine.
I use the CP regulator tool on my tanks.
This may sound a little strange but there is one on Amazon that works good it is called a Vikka Premium Precision Ballistic ........
It attaches to the end of your barrel and registers the velocity in FPS or other measurements. It is rechargeable, and has other functions like joules of force. I have compared it to a Virtue Clock, xradar and big red and it read the same + or - 1 fps.
There are some problems with it, first off it uses break beam IR light to register the ball so if you are shooting on a bright sunny day it tends to be off, not a little but a LOT. The construction is not robust enough for bag carrying (this would work best as a workbench chrono). It has to be attached to the end of your barrel, this can be nice for one hand operation but if you do not need every shot chronoed or you are chronoing multiple markers it can be challenging. One final issue unlike a virtue clock, Xradar or a lot of other chronos it can not do BPS and if you shoot while the velocity is showing it will not register.
With all of that said at a sub 40 dollar price point it is rechargeable, gets you in the ballpark for game day and is pretty simple to use.
The rail is the standard dovetail (tip off) tje tippman a5 comes with the sight https://www.amazon.com/TRUGLO-Red-Dot-Color-Sight-Black/dp/B001EYFK1U/ref=mp_s_a_1_4?crid=25ML7F2LRAISZ&keywords=truglo+dual+color+dot+sight&qid=1666418882&qu=eyJxc2MiOiIyLjI2IiwicXNhIjoiMS44NCIsInFzcCI6IjEuNzgifQ%3D%3D&sprefix=tru...
On this note, for those of you with markers that utilize multiple frames for mech or electronic actuation, I use this small case to store the frame not in use. It also has room for tools and other small parts if you so choose:
https://www.amazon.com/dp/B0196JV89C?psc=1&ref=ppx_yo2ov_dt_b_product_details
I haven't tried them yet but i just picked these up because my local indoor doesn't allow "actual cleats" with spikes. have heard good things about these, though and they are pretty affordable.
https://www.amazon.com/dp/B07FPDXDD5?psc=1&ref=ppx\_yo2ov\_dt\_b\_product\_details
Just bought this for 22 bucks. More than big enough to hold three or four guns, a change of clothes, and all the gear I need at 45 inches. I have absolutely no intention of spending any more than that for a bag that’s just going to get torn up and dirty as hell anyways.
INFANZIA 45 Inch Zipper Duffel... https://www.amazon.com/dp/B07F2ZYKPS?ref=ppx_pop_mob_ap_share
I got shock docs too! the padded ones:
I run a tmc and got a 16 barrel upgrade and HIGHLY recommend it along with better paint and I’m just having an overall better time when I go out to play because of both
That will work but if you want the best bang for the buck paint (if u in the us) get this (comes with 2 boxes)
YES. 1,000,000x YES.
​
Any slide short with a cup section should work, but I actually use 2 pads in mine because the PE one was too thin on its own, the other being from my old Dye shorts. I'd recommend looking at the Diamond MMA cup to put in there in place of the pad, just to make sure you're as safe as possible. Haven't used it myself but if I did, that's the one I'd try because it's soft around the rim and clearly designed to allow for as much movement as possible
No but there you go
I used https://www.amazon.com/dp/B011XWDTOW?psc=1&ref=ppx_pop_dt_b_product_details to reglue the foam padding back. It seems to have worked fine.
https://www.amazon.com/HK-Army-Paintball-Barrel-Camera/dp/B08M116F1D
That is all you’ll need. The camera mounts right in front of your hopper. You’ll need to mess with the various camera lenses and settings on the camera to get the best view you’re looking for.
I have a hero 9, with a waterproof case like yours I keep on. All you’ll have to use from that protective housing is the actual housing and the screw to lock it to the mount. (No need for that black plastic piece shown on the box for the housing). The fit is kind of tight with the case mount and the hk barrel mount, but it fits well and doesn’t move at all.
I am bald and sick of being shot in the dome, so I invested in a bump cap insert and a bounce cap. They just arrived so I haven't had a chance to use them yet but I am looking forward to no longer having my scalp rocked.
If you ask for helmet not for aesthetics but for protecting your noggin, a bump cap can be pretty good. I'm using one and am a big fan. (Zero ventilation on top of the head, though; but that isn't a whole lot better with helmets -- rom experience, if they have a hole, they can hit your head ... )
Something like this, just take the bump protector our of the base cap: https://www.amazon.co.uk/dp/B08JZJML49/
No but those ones take forever to fill a 68/4500, like an hour compared to these ones that take like 10 or 15 minutes and just need water for cooling and oil for the compressor https://www.amazon.com/dp/B07WVXHX17?ref=ppx_pop_mob_ap_share
I'm a little OCD about what goes where so I have a larger duffel/gym bag ($20 on Amazon) which is where my pack/pods, arm pads, mask, pod loader, and backup guns go. I also have a typical 3 compartment backpack which is where I put my main gun, barrels/inserts, tank, and hopper as well as my snacks for the day. Works for me and I refuse to spend the money on a paintball-specific bag knowing that I'll likely need two bags anyways.
Alright. I used to just run a hat and basic paintball mask. Visor and all.
I had gotten into Airsoft and decided to make a proper kit- only problem is- as I'm playing a paintball more now with friends I do wanna use my full kit.
My current mask just doesnt work out with that as its too large to fit with a helmet. I had looked into Dye masks as they dont have a visor. But considering the $200 price tag on some of their masks I was hesitant on it considering if it doesnt fit then I'm shit out of luck and I now wasted $200
So unless you or someone else knows if those kind of masks would work then that'd be great.
I saw this dye mask
DYE I4 Pro https://www.amazon.com/dp/B09NMT3VQJ/ref=cm_sw_r_cp_apan_i_VDRMF1TZ5JTPPS8J917C
And then my friend suggested I give this a try
Virtue VIO Ascend https://www.amazon.com/dp/B01LT9JM04/ref=cm_sw_r_cp_apan_i_Y3GY0148RWFN4PEYRV65
Both I'd have to wait a week or two before purchasing for personal reasons I wont get into.
But I did want to ask about converting the airsoft goggles only cause I do have a pair laying around not being used as I've been playing paintball a bit more- just without my full kit.
Main point here is - wanting to use the rest of my kit while playing and having face protection that allows me to do so but dont wanna throw down $90-$200 and it may not work out and now I'm down $200 that I couldve spent somewhere else.
Specifically something like this https://www.amazon.com/dp/B07MD5T4JJ/ref=cm_sw_r_cp_apan_i_EG4VTRZP1AW2HVS0S0MZ?psc=1
Amazon swears they are #1 in paintball goggles but they're clearly for airsoft.
Now I'd need to custom reinforce or make a lower mask from scratch and get it to properly fit and be comfortable.
This would also allow me to use a pair of ZTacs with the kit.
Any recommendations would be welcomed I mostly intend on playing airsoft but was invited to play a game with a coworker who regularly plays and just grabbing a gun of my own so whenever the occasion. I have this in my cart and my main selling point is paintball guns with visible irons sights but there hella expensive it seems. Tippmann Cronus Tactical Marker https://www.amazon.com/dp/B07Y8S2QRC/ref=cm_sw_r_apan_i_VF173372XVQG5N1M6K6H?_encoding=UTF8&psc=1
Most airsoft goggles are not rated for paintball. Theres a few goggle that can be used with a helmet. https://www.amazon.com/JT-Flex-Coverage-Goggle-Olive/dp/B007W65ERO is one, theres a few others listed as well.
Best bet is to get one of those and paint it if you really want to
Yea they are called go pro extension arms. Ud have to look at them and see what length and angle you need . It would mount to your forehead and allow you to move it to in front of your face. May have to flip your camera footage so it's not upside down.
OctinPris 3-in-1 Curved Arced Extension Arms in Different Lengths(7.5/13.5/19.5cm) Compatible for GoPro Series, SJCAMs, GeekPro and Other Action Cams ect. https://www.amazon.com/dp/B08BLB85ZS/ref=cm_sw_r_apan_i_8GJMW5A8R0GPR2B0WX9Z
BAOFENG BF-F8HP (UV-5R 3rd Gen) 8-Watt Dual Band Two-Way Radio (136-174MHz VHF & 400-520MHz UHF) Includes Full Kit with Large Battery https://www.amazon.com/dp/B00MAULSOK/ref=cm_sw_r_apan_i_F72DWEYR2JMRZ84THEM6?_encoding=UTF8&psc=1
These are great can set them to any channel. I haven't used mine for paintball comms but I know it's a solid lil radio.
Buy one of these one size up from your normal clothing size for the perfect paintball "jersey". Also for a very comfy shirt in general.
This is the amazon link.,They're out of stock right now and I don't know who else sells it.
But yeah, I used a dremel tool to cut off and shame the wings to fit the mask.
Not bald, but I have to protect my head due to metal and implants. I use a mesh skull cap and a headband. Protects the old chrome dome quite well. I’ve also used head wraps and they work well too. You can also try cycle caps too.
I wear a helmet liner in the summer time. Helps keep my head from getting burned and does a really good job of wicking sweat and staying dry.
Helmet Liner Sweat Wicking Skull Cap Beanie. https://www.amazon.com/dp/B07GS87K9G/ref=cm_sw_r_cp_api_i_7KZE0NKBX976NFE44S33?_encoding=UTF8&psc=1
Clean it up, list for $120. It's a BT 'Delta Elite' Marker.
Its effectively a 'tactical' Tippmann 98. Super robust, good entry level marker. The extras I see that you can list:
- Sliding collapsible stock
- Apex barrel tip - Allows to set a curve to the ball, increases range (debatable, but this is what you can say so they know what it is.
- Gas-thru remote line (the part at the bottom of the grip is called an ASA, the spigot at the end is the receiving end for a remote line (https://www.amazon.com/Maddog-Heavy-Duty-Paintball-Remote/dp/B01D98NOVG/)
- Rip clip electronic loader
If you have the other half of the remote line and the hopper, you can probably list for $150 and settle around $120. It is an old design but it's proven and it'll last. Heavier than most, louder than most, but still slings paint.
This is the same barrel i have on my stormer, just longer. Its a bit snug with the barrel shroud but it fits my stormer just fine. Hope this helps
This is my old Deadlywind from my last stint playing, I've still got the Freak kit for it.
And, here's what me and my homie are wearing to Living Legends this weekend:
https://cdn.discordapp.com/attachments/952943553795989514/974699297830469664/unknown-21.png
Thanks Vader. These are what I'm looking at currently.
PJ with mesh
PJ with grill
Here's what I use. It's cheaper and lighter than anything else.
ATG Tactical AK Chest Rig Magazine Pouches Vest Utility Pouches Adjustable MOLLE https://www.amazon.com/dp/B073MPV666/ref=cm_sw_r_apan_i_HK709459AX7SX7A91HY2
Googled a jt outkast. He needs a 45.
Here you go OP. There probably cheaper out there. But that was the first hit. JT PowerFeed Elbow, Smoke https://www.amazon.com/dp/B003K8NR36/ref=cm_sw_r_apan_i_98BBAE4CCM1ET80KQQ7D
I'm thinking 45. Takes me 15-20 to do a 68ci off a tuxing. I actually lucked out last year when I ordered it. Company never fng billed me the 300 for it
https://www.amazon.com/dp/B07FJVBYM3/ref=cm_sw_r_apan_i_FS528B2WCSS28Z8AP9N5
Order.one try your luck lmao.
VEVOR Airgun PCP Pump High Pressure Hand Pump 3 Stage Stirrup Pump Up to 4500PSI https://www.amazon.ca/dp/B078V1RM4F/ref=cm_sw_r_apan_i_KQWD7XEK7ZMWBW66Y6YV?_encoding=UTF8&psc=1
Will likely take you 15-20 minutes of pumping. I use one for filling my 13ci tank I use for testing. Takes me 5 min for that.
I just ordered this little filter for mine. I have the GX CS3 and noticed it spits some water out of a separate tube when you turn it off, hoping that is it’s own system to keep your air dry but will add this for safety. WHEEJE Air Hand Pump Air Filter M10X1 Oil Water Separator 30Mpa/300Bar/4500Psi https://www.amazon.ca/dp/B091Y7LFW3/ref=cm_sw_r_cp_api_i_XAJH3X3PKD5MBS44313F?_encoding=UTF8&psc=1
i still think you’d be better off with some pants instead of a jersey.
Pants are actually functional while a jersey is mostly for looks.
also, the gloves look bulky and warm. I’d suggest something like this: Link