What are /r/airsoft's favorite Products & Services?

From 3.5 billion Reddit comments

1. Think about what you're going to do. Once you have it in mind, take a breath, count down from 3 then do it. I've found it to help stop freezing up

2. Listen. Howard Leight Impact Sports amplify small sounds like footsteps or talking. It's basically cheating. Also look for shadows.

3. Learn to shoot ambidextrously. If you're peaking left and using your right shoulder you're going to expose a lot more of your body then if you use your left shoulder. Try not to chicken wing.

If you want to keep the jank look, but lose the plastic for the zip ties, I'll bet you that you could reattach that foregrip using hose clamps:

https://www.amazon.com/Selizo-Including-Adjustable-Clamps-Stainless/dp/B07G9TZLRM/ref=sr_1_16?keywords=pipe+clamps&qid=1575472925&sr=8-16

Would be a pretty simple matter to just throw a matte black paint onto them if the stainless look is no good.

Its pretty pervasive across the whole hobby but here goes:

They are Mechanix M-Pacts. Be sure to measure for your size.

Probably this.

UKarms is a superior brand. Fight me.

Some kind of knock off Haley Strategic rig. Around $45 on Amazon, I would recommend a real Haley Strategic though.

Link: here

I use a steelmouth under a Condor face wrap. It is mesh, but it's not really noticeable.

I don't recommend it actually. It's by far the worst red dot sight I own, which will be replaced soon, because the dot actually gets larger the further eyes are from the sight. I'd recommend something similar to this instead, which is cheap but clear and has unlimited eye relief:

https://www.amazon.com/Feyachi-Reflex-Sight-Adjustable-Reticle/dp/B01HPWATOC

https://www.homedepot.com/p/Knape-Vogt-16-in-x-48-in-Diamond-Plate-Galvanized-Steel-Pegboard-0204-1648/203950788

LED Strip Lights, L8star Color... https://www.amazon.com/dp/B07PLNDJ2N?ref=ppx_pop_mob_ap_share

I know this is airsoft but I actually hunt and do airsoft and I found this awesome hunting red dot sight that can work for airsoft. Trust me I’ve used it myself for hunting and love it. https://www.amazon.com/TRUGLO-Red-Dot-Color-Sight-Black/dp/B001EYFK1U/ref=mp_s_a_1_3?dchild=1&keywords=truglo+red+dot+sight&qid=1626657993&sr=8-3

Stop paying $30 for strained LiPos and get this and some of these.

I made a post on this sub a while ago asking how you can stop splashback on TM mags, and I got some helpful responses. But, I have found another alternative. The best responce was from whiteash6 but I dont have an AEG hop up nubs since I only own GBBRs and GBBP’s. Plus, with this method you will literally never run out of o rings lol

Link to the tubing: https://www.amazon.com/gp/product/B01I63KQRE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Update: did some math in a comment below, this method should get you should get you ~600 o rings

Update 2: On terms of efficiency I could almost get another complete magazine out before refilling Tested with a STOCK SLIDE TMG26 This is a compact plastic slide pistol, running on duster gas. Without o ring I’d get about 4 mags out on my TM G26. With O ring I’d get almost 5 mags worth on 1 charge.

On terms of efficiency for any guns designed for green gas/ propane/ CO2 (metal slide, upgraded TM’s, literally any gun on the market not TM or old KJW lol) the difference is nominal. Maybe 1-2 shots You shouldn’t be using duster in first place for these guns lol

Duster gas is known to pretty much only clear 1 magazine and MAYBE lock the slide back depending on what brand pistol you’re using, majority of the time.

Duster gas is way weaker than the 3 gasses listed above. This o ring mod is for universal replacement, and seriously helps STOCK TM gas efficiency running w/ TM Mags, and inclusion of the missing o ring

These rings do a good job as universal O rings regardless

The G&G CM16 Raiders are some of the best beginner guns there are. If you have Amazon Prime you can get one for just under $150.

Looking good. Maybe put an ace/fake cartridge in the helmet and some markings? I think it looks pretty cool atleast

I second this, you wouldn’t wanna ruin the all the fun with a blind eye. Amazon has some cheap goggles that can help, just make sure they’re full seal. Like this Dewalt one https://www.amazon.com/DEWALT-DPG82-11-DPG82-11CTR-Concealer-Anti-Fog/dp/B01A12J3GI/ref=mp_s_a_1_3?dchild=1&keywords=dewalt+goggles&qid=1621218376&sr=8-3 For $12 and paint over the yellow, you can’t beat them

https://www.amazon.com/Colt-Spring-Pistol-Ultrasonic-12g/dp/B005XK4C5Q ir your local fields proshop sometimes, now the real question is are you buying a gun with a lot of free bbs or when you buy a Valken with a 200 round sampler bag is it a free AEG with your small bag of BBs?

Voodoo tactical shotgun scabbard. it is maybe slightly too big for my new Jag Arms Reaper, but I love it all the same. 🤩

Vdv kit with SSO Atacka 4 ruck

Lct ak74m Real akms gat for blanks

Rip

Ill be uploading a lot of pics and short videos on instagram in real time in case anyone is interested: https://instagram.com/riikkii/

some Chinese made bag, best one i could find. heres the link if you're interested

https://fancy.com/things/1198262029463325726/Tom-Clancy's-The-Division-Cosplaying-Game-Dark-Zone-Bag-(-HAZARDOUS-)-Yellow

They’re a bit expensive now but here’s the links if you’re interested:

Cat girl: https://www.amazon.com/Good-Smile-Hinata-Channel-Nendoroid/dp/B07K7ZDFLS

Girl with big fists: https://www.amazon.com/Good-Smile-Black-Rock-Shooter/dp/B00E9OUXVY

Disclaimer: I have used this method to keep combat boots tied and tight for the last 12 years of a military career, this is a tip for anyone that wants to make their life significantly easier during airsoft while running around in combat boots.

Step 1: Grab a set of Cord locks from anywhere (ebay, amazon, random gear)

I like using these: https://www.amazon.com/gp/product/B01FH9DYU6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Step 2: Take the laces and feed them through the clip and tie a knot on the end of each lace

Step 3: Put foot in boot, tighten cord locks down to comfortable point of boots

Step 4: Wrap the laces around the back of the boot and around the cord lock

Step 5: Make the laces taut and tuck the ends or what’s left over into the boots

Step 6: Enjoy a day of running around without worrying about your boots coming undone

Side note: Sometimes the laces will get a little slack in them but your boots will remain tight on your feet, when they get slack, just make them taut again and tuck back into boot

Edit: damn auto correct!

This. Currently have the fiberglass shell and inner launcher section with madbull shell. Shoots nerf rockets at least 200ft. Need to work on a trigger mechanism and make it look nice.

There you go;

https://sites.google.com/site/hsarmory/home/products-and-services

http://www.airsoftforum.com/board/hop-installation-manual-t225374.html

Get the ZR or ZIR kit and it's pretty much drop in installation (comes with 3 patches that are cut to typical window dims so just drop it into the window).

Good news, everyone!

There is a new animu about airsoft airing next season! It is called SabageBu!. That makes two animu about airsoft. I enjoyed C3, but I don't know if I could call the show good. It was a lot of fun to watch though.

Anilist link to those that want more info.

I bought it.

You can get one at https://www.anovos.com/products/star-wars-poe-dameron-black-squadron-helmet-accessory

Or if you don’t want to spend a lot of money or worry about a collectors costume pieces getting shot or hit then you can get a black series helmet at https://www.amazon.com/Star-Wars-Dameron-Electronic-X-Wing/dp/B01MRD6AQ1

They are all over the place where I live. Order from China. Ebay or Aliexpress. You will never find a replica in the US.

https://www.aliexpress.com/item/Tactical-552-Holographic-sight-Red-Green-Dot-Sight-Scope-For-Airsoft-HT5-0002/32385738995.html?spm=2114.01010208.3.1.KaoXX2&ws_ab_test=searchweb201556_10,searchweb201602_3_10057_10065_10056_10055_10054_10069_100...

I got this case. It comes with pluck and pull foam. It was very easy to work with.

https://www.amazon.com/Plano-Weather-Rustrictor-Premium-Prevention/dp/B086DVZ1VC/ref=mp_s_a_1_4?dchild=1&keywords=plano+gun+case&qid=1625175336&sprefix=plano+&sr=8-4

Amazon has a button retention holster. You can get a separate MOLLE platform for it. I think the P30 uses the same holsters, it's basically the same pistol but in 9mm.

didnt even know seedsoft was a thing, yeah i got a nice mask, and I just want to experience as much as possible, im not into the camo or anything when i play paintball i just wear this powerranger shirt i got of amazon when i go play because its goofy https://www.amazon.com/gp/product/B002W8K02G/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3MS1I85ZQ44M2 i wish i could give you more info but i really know nothing about the sport

Vector Optics. Their customer service sucks ass but the quality is top notch. Get it shipped from Amazon if you get one, don't ever order from their website directly, despite it being like $50ish cheaper. What should've been a week or so shipping time turned into almost two months of ignored emails and constant badgering. When I said "refund" they finally got it out to me.

This one is rad because it goes 3-9x, with an illuminated reticle. I bought it after seeing this dope post by u/kylendm. Weathered it myself, along with the VSS.

Closest I can find

Yeah this guy knows exactly what he wants to get, then asks for advice just to dismiss any sensible advice given >.<

Gunfire surely isn't great.

9 out of 10 times people get what they pay for and there's no issues, but if you're unlucky and hit that 1 out of 10 where you need their customer service you're screwed. I had a terrible experience with them involving 15+ emails, 3+ phone calls and a PayPal dispute.

When I posted a bad review afterwards they contacted me directly and asked me how much I would want to change my 1-star review to a 5-star review. That was on Trustedshops.com which explains why their reviews are good on that site and bad on Trustpilot.

Get a 11.1v Butterfly Lipo, that would work amazingly. A charger would also be required, I just use a RC Smart Charger like this one: https://www.amazon.com/Charger-Battery-Balance-Discharger-Adapter/dp/B07R18YNZQ/ref=pd_aw_sbs_2/136-5768910-9357962?pd_rd_w=OEpA9&amp;pf_rd_p=c3ce9eb5-51ee-4d26-9fe8-b94b0ae2e178&amp;pf_rd_r=9GM4HBDQJBB40W5780J6&amp;pd_rd_r=2571dbdf-f037-48ba-bab8... It already has all the plugs you need and a little more, so if you ever swap to Deans, you won’t need to buy another cable.

If you want to stick with a similar profile, I'd suggest Pyramex I-Force. They may fog, so some additional anti-fog solution may be necessary (I use an ExFog system) but they are full seal and ANSI impact rated, plus you don't wind up with the screen door effect.

Mesh eyepro always gives me the creeping heebies.

Recommend the Pelican Vault V200, I have a foam insert from Cobra Foam and it fits up to 4 guns, 8 mags, and whatever miscellaneous shit I might need.

Paracord Planet on Amazon has every color you could want.

I'll second what the others have said:

Battery is expensive! Go on Hobbyking and find some. I got 2 batteries from them for $20, with shipping.

Those BBs are probably shit. Most things Angel Customs are. Get some nice heavy Elite Force BBs. If you're playing outdoors, get Bio.

That red dot probably sucks ass. Save up to get a nicer one and use iron sights until then. I know there's a $25 on Amazon that I've heard is good, but the name escapes me right now.

Get a flash mag or mid caps. Normal hi-caps suck.

I'm not a fan of those masks. I'd suggest goggles and mesh, like Pyramex I-force and One Tigris Mask. Works better and is more comfortable in my experience.

Good choice in gun.

Nope, Bouton 5900's. I'm not sure whether or not they were G.I., but I bought them off a family friend that was a helicopter engineer in Vietnam, he wore them during his tour.

edit: You can still buy them on Amazon for pretty cheap.

Basically nothing, you can get a better charger for about the same money on Amazon

I personally love it. I originally bought just a wire mesh, however, I couldn't aim down sights very well as my gun would always hit the wire mesh. After switching to the cloth/wire mesh, I can aim perfectly down sights. It's cheap too; here's a link to it on Amazon:

https://www.amazon.com/OneTigris-Comfortable-Adjustable-Protective-Available/dp/B01KT0HESQ/ref=sr_1_sc_1?ie=UTF8&amp;qid=1512880907&amp;sr=8-1-spell&amp;keywords=one+tigerus+mask

Haven't used this personally, it's been in my saved items on Amazon for a while now, so ymmv but it has decent reviews.

https://www.amazon.com/gp/product/B074GZNR3V/ref=ox_sc_sfl_title_20?ie=UTF8&amp;smid=A1D7EPZ37OL0UE&amp;th=1

Looked and compared the item numbers.That doesn't look right. The number on the black one with a fan was 740-0499, which is the black non-fan version, according to Amazon and ESS's website.

https://www.amazon.com/ESS-Eyewear-Profile-Compatible-Goggles/dp/B006M0NW4I/ref=sr_1_2?ie=UTF8&amp;qid=1523402138&amp;sr=8-2&amp;keywords=ess%2Bgoggles&amp;th=1

Absolutely invaluable. Especially for dark CQB areas where you need superhuman vision to acquire a target with regular iron sights.

My recommendation would definitely be the Bushnell trs-25 which is a real steel red dot. Very little parallax shift, waterproof, lifetime warranty, good battery life. They've been on amazon for just over $40 lately which is incredible. People were saying they were good value when they were selling for closer to $100 a while ago. I believe it needs an 0.83" riser for lower 1/3 cowitness or a 1" riser for absolute cowitness with iron sights.

Then a cheaper option, but more suited to CQB (due to parallax shift) is this style open red dot. The different selectable dot shapes are good for faster target acquisition at closer range. They hold zero fine in my experience, but will lose it if you bash them so again better for CQB where that matters less.

I disagree with what the other person said, you can find good things on amazon. They won't be as good as Crye but you won't need them to be unless you plan on rolling yourself in gravel, sandpaper, and flaming knives/bullets.

Something like this is going to be maybe 80% of Crye functionality and quality for 25% to 33% of the Crye price. They take a different kneepad system from the Crye, but they will be largely the same in their function, advantages, and drawbacks.

Tru-Spec, 5.11, Condor, CQR, etc. are good brands to look at if you don't want to spend loads of money for "real operator" clothes. If you have trouble looking, you can use this as a reference for your shirt.

Thanks, I'm leaning towards them too. airsoft is 90% looking good.

Its actually just a cheap condor chest rig I found on amazon. Super lightweight and seems to be made well. no tears or anything after a year or so. I coupled it with this guy as well as a few old pistol mag pouches i had laying around.

It’s gonna be this one with a black lease instead of the gold one

I use a 14 slot riser that works well for me, seeing this pic I may want to hold off on that 8 slot I was planning.

Using the "Airsoft Resale Calculator" app (based on /u/Vorpalbunnie's resale formula), and assuming minimal usage, the absolute most they would be worth is around $440 total, which is approximately 70% of their new value. Again, that's assuming that they are basically brand new, but still used.

I'd agree with /u/MrBlackMaze though. They likely have more sentimental value to you than the amount you would get from selling them

Yeah. When you almost don’t survive because something, you become very vocal against something. So I’ tell you whut, these slap

KRYDEX Molle 5.56mm Triple... https://www.amazon.com/dp/B081G7Z4TF?ref=ppx_pop_mob_ap_share

About 3 years ago I made the mistake of buying a P90 with the built in red dot sight. It has bothered me since but I never got around to buying the rail. But today, I sat down for half an hour and designed it and then printed it on my Simple metal.

Here's the download link if anyone wants to print it themselves and for those who are curious who the build process looked like can sneak a peek here.

Alright Buddy, you don't know jack shit about CO2 prices...

https://www.walmart.com/ip/Crosman-12gr-CO2-Powerlets-40ct/19426365 - Thats 43 cents each, avaliable at over 5000 Walmart stores across the nation. Or http://a.co/0PjSvBP - Avalialbe to ship all across the country for the same price.

I don't know anyone who pays 1.50 per unless they are an idiot...

I've been thinking about building a gun in this fashion. But no PVC pipe for me though! Check this shit out.

https://www.aliexpress.com/store/product/34mm-40mm-350mm-Best-Quality-Glossy-Tube-Roll-Wrapped-100-full-Carbon-Fiber-Tube-3K-for/2206085_32684808718.html

None of that fake carbon here :D

It's a very universal gun, it has many aftermarket parts and a lot of upgradability. For me personally, I only own one M4, but that's because I got it in a mystery box and didn't really ask for it, as for the rest of my collection, it is fairly unique.

Actually, there is one really damn good free video editor you can get.

Check out Blender.

You may be wondering why I'm linking a 3-D modelling software to you, but the thing is, it has a very professional video sequence editor built in to it. I'm currently learning how to use it so that I can better my video quality. Its got quite a learning curve, but it's well worth it to have great quality videos!

Here's a guide for it, best of luck

You failed to include information on where you live in your original post. Since Gunfire is in Poland I assumed ordering from the UK would work too.

AK2M4 is a small shop, I believe it's run by a single guy, but that doesn't mean it is bad or not to be trusted. Rather, on the contrary, it's an excellent shop with excellent customer service. PayPal got your back if shit goes down so nothing to worry about it.

Here's how great Gunfire is - aka not great at all...

Got it on amazon I preordered it and got it before the website even said in stock with a week free shipping heres the link https://www.amazon.com/dp/B081NSN98T/ref=cm_sw_r_cp_awdb_imm_VZEK2AFH9YFC76F02QZT

Iron-on patches aren't really the best for airsoft. Generally, the permanent nature of the patch, along with the need for open space to attach it, generally makes them less preferable to a velcro backed patch.

However, iron-on patches generally have a lot more variety (at least in my experience) and you can get a lot of different stuff that you generally don't see with a velcro backing.

The solution to that is this: Industrial Strength Velcro.

Basically, you measure your patch, trim the hook side of the velcro to fit inside the edge embroidery, and then stick the velcro directly to the patch.

This is my current set up, hope this helps:

Helmet

Headset

It’s pretty simple. They have other colors for the helmet as well if you don’t like foliage green. The website I linked you ships pretty damn fast. The helmet is thick, not like those plastic garbage ones. Super comfortable to wear.

It’s probably not what you think lol This 35$ vest off of Amazon

Edit: I cut some cardboard and taped it to the foam inserts. Feels much like a actual plate carrier now.

I have this https://www.amazon.com/Feyachi-Multiple-Picatinny-Absolute-Co-Witness/dp/B07WR9FQWQ/ref=sr_1_7?dchild=1&amp;keywords=feyachi&amp;qid=1618459857&amp;sr=8-7 on a real gun and it works really well not sure how resistant it would be to bbs but you could get a plastic shield to put in front of it.

It’s not worth spending money on cheap electronic earpro. They look cool but make the playing experience much worse.

Either spend a bit more (150-200), or save up for awhile and buy the real deal

Trust me I know from experience

These are the cheapest I’d go

TAC-SKY Comta III Helmet Tactical headset,Side Rail Airsoft Earmuffs with PTT and Microphone for Hunting https://www.amazon.com/dp/B07V7DDK1S/ref=cm_sw_r_cp_api_glt_fabc_DZNVTFKX932JYKQA9CY8

I love my blackhawk serpa holser, solid fit on my kjw 1911 hi capa and came with a belt holster paddle. Amazon Link Right Hand Size 3 is what I got.

I have both the real-deal multicam HSGI tacos ($34 per single m4 pouch) and just bought a pair of multicam Emerson tacos ($14 per single m4 pouch) that I just found on Amazon - which turned out to be one of the best gear buys vs. cost that I've made.

At least for airsoft, I'd 100% go for the Emerson ones - there's little functional/aesthetic difference between the two (they both use genuine Multicam material). I'd say the Emerson ones might have a slightly less durable bungee cord and the plastic side inserts are a little sharper/less high-strength polymer (just take fine-grit sandpaper to the edges so it doesn't scratch you).

The greatest thing about these pouches are that they basically accommodate any standard magazine you're going to run on a typical airsoft gun by tightening or loosening the cords. You don't need any special magazines and can definitely run any standard M4 magazine available. I have everything from KWA high/mid caps, PTS EPMs, and King Arms midcaps - they all fit with plenty of room even with ranger plates/magpulls. They hold the magazines firmly in, but loose enough to pull out without struggle (additionally they have another bungee tab on top to retain the magazines that you could just push out of the way). I'd trust the real ones for better retention without the top bungee strap on, but with that strap over the Emerson I have zero worry about losing any of them. I run them on my weak/off-hand side to ease in reloading.

In regards to them collapsing, they really don't at all. You just push the magazine into one of the plastic side pieces to stretch the opening and push straight down. It can all be done easily with one hand.

If you need, I can post some pictures of them on my setup for reference.

https://www.amazon.com/gp/product/B06XQF6V2R/ref=oh_aui_detailpage_o00_s01?ie=UTF8&amp;psc=1

Edit: added link

For $35 bucks you can buy the Howard Leight Impact Sports, they have a slider so you can increase the noise of sounds near you, but it cancels out noises over 82 db according to the amazon list. Not sure if its what your looking for.

The FieldSport Micro Red Dot off of Amazon is a pretty good choice. It’s cheap, and good quality, it’s made for real AR-15’s.

https://www.amazon.com/FieldSport-Micro-Sight-Precision-Green/dp/B00Y3SZEJC

I don't remember where exactly I got mine, but you can find a bunch of different ones online at places like amazon or probably evike.

Don't spend more than $8 at the very most for a set like these (I've seen some for ridiculous rip-off prices), but if you want you can DIY some for even cheaper. All you need is a couple strong, flat magnets, some glue, and some felt.

I use a dope Balisong/Butterfly Knife trainer and it looks amazingly awesomely cool

here is the one i use i got it off amazon for about 9 bucks

You can open these knives really fast and it looks amazing.

https://www.amazon.com/gp/product/B01I31QY52/ref=oh_aui_detailpage_o02_s00?ie=UTF8&amp;psc=1

This is the most accurate way to calculate the firerate on an AEG. It only involves your phone, no high-speed camera or anything.

Download the Physics Toolbox Sensor Suite from the Google Store. It will allow you to plot data from various sensors on your phone.

When your gun fires, the current it'll draw varies over time, meaning the magnetic field around the motor will also vary over time.

Simply use the app's "magnetometer" feature to plot the magnetic field value over time as you shoot in full-auto. Don't forget to place the phone next to your motor.

You will then need to measure the time between each "spike" in the graph. It is read on the X axis.

Once you are done, divide 1 by that time and you will get the firerate in BB's per second.

http://wiki.answers.com/Q/Cybergun_airsoft_company

I take it that the text in that link covers why Cybergun are so disliked, or are there other reasons too?

I got one of their M14's before I joined r/airsoft, so didn't know any better... The piston gear stripped itself half way through the first magazine put in it!

If you got access to a 3d printer, a guy on our airsoft forum designed a FAMAS Valorisé Upper (CG means it is designed for Cybergun, there’s a version for the TM as well)

Me and my brother had the genius idea of 3d-printing a new handguard with tri-rails on it after being completely unable to find any nice looking ones for sale on the web. The thing literally only just fit in the printer about 3-mm from the top. Naturally we then printed a fore-grip to go on the rails. They're both super solid and really do look the part. Well chuffed!

Apart from that the gun is just a standard used and abused Classic Army MP5-SD with a second hand UMP style stock that my friend in Germany bought for me super cheap and then shipped over to the UK. Thanks Luke!

Oh and sorry about potato-phone camera.

Edit:

The file for the handguard is this: http://www.thingiverse.com/thing:194334 You'll need quite a tall printer like I said it only fit my brother's by a few millimetres

The fore-grip can also be found somewhere on thingiverse.com

Obviously it won't work very well if you use your Glock as a sidearm, but maybe if you use it as a primary?

Here's the download link for those who are interested.

That's genius! Did you come up with it?

I designed and tested this little piece just now. It seems to work flawlessly on my WE G19. I just fired over 100 shots without a failure. Though I didn't use glue I'm sure it wouldn't hurt to add a little. Would it be OK for you if I added your video in the description and gave credit to it?

Prometheus 6.03 is your best bet for accuracy followed by madbull black python v2. You will find those recommendations in posts dating WAAAAAAAAAAY back!

Look up the R-Hop and you can order that from here, it gives you MUCH more range and is pretty much a requirement to make an gun a field gun these days.

That's your accuracy and range sorted (The basics anyway) Once you get to know your gun a bit better and the internals, there are plenty of mods to lock down the internals and get good air seal and remove vibrations.

Going for high RoF, High FPS or Trigger response is all up to you from there.

Get the gearbox cleaned and regreased (white lithium grease), have the gears shimmed and go for a LiPo 7.4V. You can also get a basic MOSFET too which will help the gun's performance.

Sign up over at airsoft mechanics and take a look at the threads. You are mainly looking for the posts/threads by "hunterseeker5". The guide and material needed are there.

Also this.

Well, you have to give us information on what you want to achieve. For CQB, generally, I wouldn't recommend an r-hop. It's mostly due to you are not using the range or really the accuracy. If you want to achieve some of that, then I recommend getting a flat hop. This is much easier than an r-hop and can be easily replaced. A nicer barrel would be great, and a prommy purple wouldn't hurt. I also recommend putting a MOSFET in so you can use 11.1v LiPo's. Getting a new motor would help with trigger response and RPS, so if you can go full auto that would be something to look into.

If you want to look into the gearbox, get a new shimming and an AOE. Would just help your performance much better. If you need more information, look here

Actually it was aliexpress https://www.aliexpress.com/item/New-Arrival-Tactical-Hunting-Trijicon-Acog-4x32-Fiber-Source-Riflescope-Red-Optical-Real-Fiber-with-Markings/32594633398.html?spm=2114.13010608.0.0.AIWalY

Better motor: better at turning your gears (lets you run more rof and energy, aka fps). Edit: to clarify, it lets you stress the box more, it doesn't automatically give you fps)

Systema bucking: Hop-up bucking, or "sleeve". Stock ones aren't usually as good as aftermarket ones. The hop up is where more of the range/accuracy upgrades are needed. the Rhop is basically a new, better designed type of hop. Read, and order, from HERE.

New gears help rof, lower ratio basically "spin faster".

A LIPO battery comes in different "c" ratings, which is basically the amount of current that the battery can let out. Most "airsoft lipo's" I see are 15c, but I would go 20c+. The motor will only ever pull what it needs from the battery, but if it is pulling too much and the gearbox can't handle it... it breaks. A mosfet will greatly help your wiring and motor stay alive in the higher c lipo's. *A note on lipos: Try to not buy them from airsoft sites, they overcharge for under-performing models. Hobbyking sells god ones for cheaper, All-battery is another one.

And as always, a correct shim job will do wonders for the rof.

And heavier BBs DO help. I wouldn't ever go under .25s.

Played at Ballahack Airsoft in Chesapeake VA. Here are some pics from last weekend.

https://photos.google.com/share/AF1QipN28JV1zm62w4SEkG3GdAfIpGINBlHxj2q94YrI-CW3nTFThbg4mrkQSDwGThFj8g?key=Uy1BZURKZVllS3AzQk0zdHFkQ09NSFg4MXlTZU1n

Lots of stuff is hard to get wherever you are right now.

ESS Profile TurboFan Blk (740-0131) https://www.amazon.com/dp/B076HG7KG1/ref=cm_sw_r_cp_api_glt_fabc_T8PC859EWSH7A5PM0QQN

Amazon might deliver these to you though.

Gotcha, sorry I take medical stuff very seriously after having a bad crash and the only reason I lived is cause the dude we hit was an ex marine medic lol. At the bear minimum I'd keep an Israeli bandage and some compressed gauze on you. They're super cheap and it would be better to have and not need personally. As for stuff to improve your actual airsoft kit having a helmet would help, and a pair of ambulance scissors on the front looks pretty cool

Yea it is a rk-1 grip. I was looking at buying a b-24u mount but between the price and how long it would take to get here, I just decided to go with these. A fraction of the price and works just as well!

I personally like these because they fit behind the mask at the nose and wrap around the back of the masks head piece Pyramex I-Force Sporty Dual Pane Anti-Fog Goggles https://www.amazon.com/dp/B006WPSELE/ref=cm_sw_r_cp_api_glt_fabc_45Q7WN5FM6QHKSYVJ2XH?_encoding=UTF8&amp;psc=1

You need some of these bad boys - Croc boots lol.

https://www.amazon.com/Crocs-Mens-AllCast-Rain-Black/dp/B01N0SUKIX/ref=asc_df_B01N0SUKIX/?tag=hyprod-20&amp;linkCode=df0&amp;hvadid=312380684299&amp;hvpos=&amp;hvnetw=g&amp;hvrand=18196269129364545764&amp;hvpone=&amp;hvptwo=&amp;hvqmt=&amp;hvdev=m...

If you have a Keymod handguard, the bolts and tabs on the bottom slot into the... suggestively shaped... holes. you then use a long allen key to tighten the bolts down through the hollow grip so it doesn't slide back off. (Keymod HowTo, uses a rail segment, but similar concept, torque wrench not required for airsoft).

If you don't have a Keymod handguard, there are adapters for picatinny rails that you can buy. If you don't have a picatinny rail, you're basically SOL without replacing your handguard.

https://www.amazon.com/Interchangable-resistance-Protection-Motorcycle-Paintball/dp/B07BNGWS5G/ref=mp_s_a_1_2_sspa?dchild=1&amp;keywords=airsoft+goggles&amp;qid=1626138598&amp;sprefix=airsoft+go&amp;sr=8-2-spons&amp;psc=1&amp;spLa=ZW5jcnlwdGVkUXVh...

I did some searching and I believe it’s these

You can actually downgrade a bit if you want, that belt is a really good real steel belt that I'm actually saving up for lol, the one I'm running now as my low profile belt is this one and I have no complaints for it, only reason I'm upgrading is because I'm getting into the military as a tacp and want an actual belt

Condor Gen II Battle Belt https://www.amazon.com/dp/B086WQ167D/ref=cm_sw_r_cp_api_glt_fabc_5WEA3NDT6Q4917YND30A?psc=1 You still need it get a belt for it but you can put all your gear on it and not be in fear of all your shit falling

ActionUnion Airsoft PEQ 15 IR Laser PEQ Box White Flashlight + Red Laser Sight with IR Upgrade Version Battery Box for AEG GBB CQB https://www.amazon.com/dp/B07JHSBW9R/ref=cm_sw_r_cp_api_glt_fabc_2QNWSAQ3RG2X13PTXZXE

Revision Desert Locusts are pretty good if you can get them at that price.

Pyramex I-Force goggles are good if you want low profile and cheap (but still effective).

Not the OP, but I recognize it. I bought it a couple years ago from Amazon.

It's a knockoff, but not a bad one. But even the color is a knockoff: "Balck."

Been using this ones for a while Mags fit well and i'm quite happy with them.

https://www.amazon.es/gp/product/B00VFWT4N6/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UThttps://www.amazon.es/gp/product/B00VFWT4N6/ref=ppx\_yo\_dt\_b\_asin\_title\_o01\_s00?ie=UTF8&amp;psc=1F8&amp;psc=1

This works pretty good, pricy and you might not be able to use the laser but it comes with a red dot

https://www.amazon.com/Pinty-3-9x32-Rangefinder-Illuminated-Reticle/dp/B01N1Z56E5/ref=mp_s_a_1_4?dchild=1&amp;keywords=pinty&amp;qid=1621020590&amp;sr=8-4

Elastics, mostly. I use a stubby foregrip on my MP7 which has its own shock cord to hold the switch itself, and then I added a hair tie to keep the switch from riding up by keeping the cable in the right place.

&#x200B;

Cloth tape of various types are also a good option. Gaffer tape, sports wrap tape, etc.

&#x200B;

Magpul sells these nifty things and there are a ton of knockoffs on Amazon for a lower cost.

The B6AC comes with a Deans plug. If you need to charge Tamiya batteries an adapter like this will solve the problem.

OneTigris is good if you want a cheap but reliable facemask. Pair that with some decent eyepro and you'll be set.

Check their line of products, they offer different masks, so you might find one that'll fit your needs.

Isn't the Nov SSP1 a KJW OEM? If so, then you've got at least a partial 3 for KJW there too, as he's got a 'RMR' mount for the SSP1. Dunno how common the hole pattern is for the sight (Canis Latrans Mini RDS is what it's built for) and I know the iron sights are replaceable with fiber sights.

those are cool looking.
BUT. I don't see an impact safety rating on them so they might not be safe for airsoft. There is an impact safety standard test, ansi Z81, that you should be looking for when getting any eye protection, for airsoft or job site. It's is like a 12 gauge from 10 feet away with out breaking or something like that.
Good news is that there are some very cheap options that you can get to slip under that mask so you can keep the look like these

https://www.amazon.com/3M-Virtua-Protective-Eyewear-11873-00000-20/dp/B00AEY4PKS/ref=sr_1_11?crid=GTILQFM0ADUU&amp;dchild=1&amp;keywords=ansi+z87.1+safety+glasses+anti+fog&amp;qid=1610574731&amp;sprefix=ansi%2Caps%2C175&amp;sr=8-11

these for goggles that will fit or if you’re looking for goggles and lower face pro I’d highly suggest the dye i4 or i5 masks they’re a little pricey but you’ll run into virtually no fogging issues and they fit great over glasses