What are /r/Vaping's favorite Products & Services?

From 3.5 billion Reddit comments

Sitting in vehicle for really long fkn time Tip:

Plug one of these into a mod running a dna/okl/raptor/anything that handles>=12v and you don't need to worry about batteries anymore.

https://www.amazon.com/Premium-Organic-Cotton-Puff-Japan/dp/B01MFG2S3V

___

Guess the price went up since his review. And with a username of RyanReviews... wonder if they're selling their good opinions. :) Or maybe the store owner.

Molicel P42A! Pickup a pair from one of the authorized vendors listed here and an Xtar charger like this one with ample length for 2x700 from Xtar's official Amazon store. Also if you can, wait for the Drag X Plus Pro (boost chip and updated TPP 2.0 pod tank), ETA is supposed to be end of month.

We used my buddies camera. It's the Marcum Pancam.

I just bought 8 more bags of this stuff a few hours ago Im just running out of the first 4 bags I ordered after almost 2 years. I used to use muji pads but this stuff is easier in my personal experience.

Just get one from Amazon. I’ve used this one for 5 years.

Precision Digital Kitchen Weight Scale, Food Measuring Scale, 500g x 0.01g (Black), LB-501 https://www.amazon.com/dp/B005UGBG20/ref=cm_sw_r_cp_api_glt_fabc_MA0VPCZM1Y38QQYS7QVN?_encoding=UTF8&psc=1

The way the cable is plugged in 2nd pic makes me shiver, lol. Grab this or this from Xtar's official Amazon store (Prime eligible). Those VTC5A are good batteries though but you'll need another pair so you can swap, grab another pair (or Molicel P26A) at liionwholesale.com or 18650batterystore.com.

Personally, I like the added challenge of figuring out your perfect build, and the very simplicity of the mod itself. I never wanted a mech mod for a harder hitter, I feel that I could just use a regulated mod with a fast chip, and turn up the wattage.

I have the Broadside mod and love it. I do use the VTC5a for my DTL builds (VTC6 for MTL) because the it has good specs, and it's easy for me to keep the two straight.

Play around and experiment with your builds and make use of a coil calculator. I like this one for my Android phone more than the great Steam Engine, it feels more user friendly to me. You just need to find the right balance between coil mass and resistance (wattage) while staying safe.

If you're looking for more power, there are series mods. You do need to build differently for these though, since the voltage is doubled, I believe that the amperage is too, so the wattage is quadrupled; if I remember correctly. You could easily pass the amp limit of your batteries and/or fry your cotton quick if you don't calculate in the double voltage. Beefier, higher resistance coils work best in a series mod, at least compared to a single battery mod.

I've heard that you can stack two Broadside mods into a series tube without any other adapter or anything of the sort, so I assume the same is true with the Admiral. But I haven't tried this, I only have one and I prefer single battery mods anyway.

Geez, looks like it been happening for months too, unexcusable (unless they're in on it)... Reason why use virtual cards from your bank if they offer it or privacy.com to generate one-time cards for any online purchase, not just vapor products (you can also check privacy which card tried to be reused again so you know where it got stolen from) but generally best to stay away since they already leaked your personal info along with your card.

It's strange for sure. Have you ever tried rayon? It's got some advantages over cotton and is great if you're into RTAs (not so great for RDAs), and it's also dirt cheap (speaking of ropes) - find it here on Amazon 👍

Fantastic app and it's plug and play for ohms law https://play.google.com/store/apps/details?id=com.stasbar.vapetoolpro (check the voltage of your battery quick Google search will do that much for you and you're off to the races if you know the rest)

Not that you asked but the mod is a Mohawk Tomahawk. 41mm 18350 mode.

ETA, atomizer is a modded Kayfun lite: Source.

> Smallest kayfun/18350 setup in the world. @mohawkmods Jd tech tomahawk ✖ kfl ✖ @scienceofvaping microtank kit, it cuts out the upper chimney making this little tank a direct chamber super flavor machine. 

Yes, it's via paypal (though not sure how long that will last) or xfer. They ship from HK (some from Shenzhen, click the Product List box to see where). Hope you got your debit card all sorted out but for future reference, use something like privacy.com, create virtual single use cards (can also set up limits and cards for subscriptions). If someone tries to charge a used card, you'll get an alert which card so you'll know where it was stolen from since each card number is unique. Use it for all online purchases, not just ecig stuff.

This is fairly cheap from Amazon. It's meant for art supplies I guess - at least that's where I found it. I like it because you can have everything upright. The middle part is adjustable too.

https://www.amazon.com/Bamboo-360%C2%B0-Rotating-Supply-Organizer/dp/B08MJ9KKLF/ref=sr_1_10?dchild=1&keywords=bamboo+art+supply+storage&qid=1631924694&sr=8-10

You need this app. You do have to create an account but you don't have to give it access to GMail. Then it will ping you just like if you had signed up for Informed Delivery through the USPS. https://play.google.com/store/apps/details?id=com.aftership.AfterShip

https://apps.apple.com/cv/app/aftership-package-tracker/id507014023

Ohhh I want to try the Fat Rabbit too! The review I read made it sound like the wicking would be pretty forgiving though. Sometimes I actually do comb my cotton out until it can't be combed out anymore, and that ends up being just the right amount, so don't be afraid to get in there 😂... The reason I suggested Cellucotton though is that it's not really cotton, it's a different fiber material (rayon), it has a more open structure than cotton so it wicks WAY faster but also lets air into the tank better than cotton does, which makes it perfect for RTAs. It also doesn't burn as easily so it lasts like 2-3 times longer than a cotton wick. I've been using it for about a month now and I really like it... It's a little bit of a pain to work with when actually wicking, but the results are worth it in my opinion. You can grab a huge box for super cheap on Amazon, so even if you don't like it, you're not out but a few quid 🤔

I haven't heard of that maker and it doesn't say. I'd go for the Xtar X2 New/Extended or PB2S (product page from Xtar's Official Amazon store for X2 New/Ext and PB2S).

If you're on Android you can find it on the Play Store here.

If you're on iOS you're out of luck. Apple removed and banned all vaping related apps from the App Store. You'd have to find a way to side load it without using their store.

Takes away from the looks a bit imo but makes it so comfortable to hold and the buttons feel great https://imgur.com/GeLsxgj [!amazon]https://www.amazon.com/ModShield-VOOPOO-Silicone-ByJojo-Sleeve/dp/B073YHZRCL/ref=sr_1_2?ie=UTF8&qid=1507007891&sr=8-2&keywords=modshield+byjojo+drag

• FYI like half the things 'ship in 7 days' which means fasttech doesn't have the item and it could take a lot longer to ship.
• cotton is way cheaper on amazon https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=redir_mobile_desktop/135-0976499-5125029?_encoding=UTF8&keywords=muji%20cotton%20pad&qid=1506279446&ref_=mp_s_a_1_1_a_it&sr=8-1
• No one will recommend buying batteries off fasttech, but instead use imrbatteries/lionwholesale.
• Need actual wire.
• Something to potentially wrap wires around, though screwdrivers will work.

It takes 5 seconds. Get Talon Grips (or a similar product) for a gun size that’d give you enough surface area to cover what you want or get big sheets of this stuff. Order it. Apply it like any sticker or wrap. Hit it with a very low power heat gun or a hot hairdryer. Finished.

The longest part is deciding what style of grip. I personally prefer rubber Talon Grips on my handguns (unless I’m shelling out some bucks on a custom stipple).

This is what I put on my Shield 9mm Performance Center and I love it. It looks way darker in person than the Amazon link. Here’s mine.

Just get a cheap one from amazon. Something like this works good. Magnasonic Professional Ultrasonic Jewelry Cleaner with Digital Timer for Eyeglasses, Rings, Coins (MGUC500) https://www.amazon.com/dp/B007Q2M17K/ref=cm_sw_r_cp_api_i_lRlhFbWKQYCK5

For my longer jobs like drilling and grinding the air holes on kayfun lite clones I actually hold it under dripping water in the sink. For smaller quick jobs I've used old e liquid, since it can be a pain in ass to wash out machine oil and I have a bad full of e liquid that I don't use. If you use the automotive sand paper you can just wet it with water, the paper I got is made for wet sanding. I think I got it from Walmart it was years ago when I was panting truck parts so it may have come from an auto parts store.

This is the last diamond bits I bought

Just take it slow on the glass and smooth the sharp and I think you'll be happy with the difference it makes. Oh and if you try to mod any metal parts don't force the bits down into tight holes like small air holes because they can overheat and break of in the hole and it sucks trying to get them back out. I learned how important patience is real quick doing that, and keeping your work cool and lubed.

Believe shipping can take a couple of months if it ships at all from China. Here are search results from the sub, you can also check results from TrustPilot.

Says here that it won’t be detectable in urine after 3-4 days of stopping using nicotine.

4 days if it’s a saliva test.

1-10 days if it’s a blood test.

Up to 12 months if it’s a hair test.

https://www.webmd.com/smoking-cessation/taking-nicotine-test

Out of interest, what kind of job doesn’t allow you to use nicotine? That’s insane. What country do you live in?

Multiple online dictionaries would disagree with you my friend. Here’s just one thesaurus link proving they’re synonyms. Feel free to simply google and find pages and pages of the being equated.

http://www.thesaurus.com/browse/addiction

According to this and this, IL. Lots of complaints about counterfeits though.

No it isn't.

The hottest temperature ever recorded in Phoenix was 50°C/122°F. Average summer highs in July, the hottest month of the year, are 106.1°F/41.2°C. The average annual extreme temperature is 114.4°F/45.8°C. And at the moment, you're getting highs of 40°C-42°C.

Phoenix is a hot place, but there's no need to exaggerate the temperatures in the name of gatekeeping when people in the UK, which is about as far north as Edmonton in Alberta, find 30°C+ hot.

Thanks bud, i really appreciate it!!! I do plan on getting awesome at building, i remember getting my smok osub and dreaming of rta's and rda's and stumbling onto coil porn and was like......woah. Since then, getting great at building is what i aim to do. As far as what id love to build??? Those naked staple clapton thingys.... They look soooo sexy and neat lol....i follow alot of builders on instagram... My feed is very heavy vape related so much so, i dont see a picture from a RL friend for about 30 seconds lol. I love your advice and suggestions bud!!! Keep'em coming!

clapton-nized!!!

http://www.gearbest.com/electronic-cigarettes/pp_193603.html?utm_source=shareasale&utm_medium=shareasale&utm_campaign=shareasale heres one maybe. If you surf the web it may take a while to find one thats pretty cheap but heres one. If I where you I would buy the kit and sell the Subtank on Ecigclassified or just keep for a rainy day sometime your tank will crack if you drop it. "Knock on Wood."

Yeah, I thought that might be the case so replied twice earlier... I would guess moderate usage if it's your only tank is a coil head a week. A five-pack is around $15 shipped at Gearbest.

You're probably looking at refilling daily, or every other day. It really depends on the coils you use. I use the RBA deck and some very low subohm coils so it drinks the juice. With the 0.6 ohm stock coils, they certainly wouldn't drink it nearly as fast. I am always well over 60%. The lowest I go is 70% VG and I'm usually over 80% without issue - the Goliath has juice flow control and you can just run it wide open if necessary. Never dry hits on that tank... Zephyrus also from Youde is another option that's around $10 more affordable and slightly easier to fill. It also has the rebuild deck or can use pre-builts...but doesn't have the jucie flow control feature that makes Goliath my favorite tank.

Goliath v2. That way you can build it, or use a wide variety of pre-built coils. GearBest has them, as well as all four of the new coil heads (KA1, N80, and Ni200, I believe from 0.5 through 0.12 ohms).

Your biggest issue will be finding a credit card processor that handles e-cig stuff. Most underwriters consider it high-risk. You're looking at about 3% processing fees, and other monthly fees, $25/month for authorize.net and probably $0.30/transaction.

Next to that you need to get an online store up. There's a couple of options, if you aren't web savvy, but they cost more in the long run. For my site, NONAMé Box Mods I use OpenCart, but I also install and manage it myself. The upside is it's open source software, and there are numerous plugins to tailor it to your needs. The downsides are you have to find a host yourself, install and manager it. There's also a few bugs, but nothing major.

If all of that is too much work, you might want to go troll /r/PVcommission for the odd commission job. A number of people have started their own mod building business from that, and actually have their own subs here now.

Not that I agree with the utter bullshit witch hunt "marketing to children" argument but candy cigarettes and bubblegum chew emulate the form of an adult product. E-juice in flavors like gushers and random candy and cereal emulate the flavors of products marketed to children. So they are two diffrent things and merit different reactions. I'd say the reactions are probably the opposite of what they should be though. Ill just leave this here. http://www.yummly.com/wp-content/uploads/2012/05/Bubble-Gum-Vodka.png

Edit: i guess if you wanted to equate form and flavor then, either, bubble gum chew and candy cigarettes are actually ment to apeal to adults because of what they imitate and ejuice is ment to apeal to kids because of what it imitates or bubblegum chew and candy cigarettes are ment to apeal to children because of their nature and ejuice is ment to appeal to adults because of its nature. Maybe.

It's just a DAISY-CHAINABLE USB pc fan from Amazon https://www.amazon.com/dp/B00G05A2MU/ref=cm_sw_r_cp_apa_glt_fabc_RNJ991CHKC0N2BG5NBJ1?_encoding=UTF8&psc=1

Has adjustable speed. Definitely nice that it daisy chains too, you could easily make several that only need 1 USB port.

This one direct from Muji for $1.99 but with s/h fees (or $3.50 in-store) or Amazon

I’ve had this ultrasonic cleaner since last August and it hasn’t failed me yet.

If you want to clean coil heads look into a Robo2020

Just got this. Great to have around for things like this.

Precision Screwdriver Kit, XOOL 62 in 1 Electronics Repair Tool Kit, Magnetic Driver Kit with Flexible Shaft, Extension Rod for Mobile Phone, Smartphone, Game Console, PC, Tablet https://www.amazon.com/dp/B086SQZGLJ/ref=cm_sw_r_cp_api_glt_fabc_61CXBFJMZZ9A8BEZC49T?_encoding=UTF8&psc=1

I'm using Muji cotton, lot of people here also seem to like it. It's dirt cheap on Amazon. https://www.amazon.com/dp/B00VHA3ZXQ/ref=cm_sw_r_cp_apa_glt_fabc_13V81RRFR1YGGREQ40RV?_encoding=UTF8&psc=1

Hey! I just found some. I looked back and saw the name Delrin drip tip and looked on Amazon. Found some in other colors. Delrin 810 wide bore Drip Connector tip For 810 Tanks Low Profile Pipe Fitting Accessory-purple https://www.amazon.com/dp/B091G5JQMJ/ref=cm_sw_r_cp_api_glt_fabc_0205E9642S1NKKTK9PAK

This is what I use, you can a brick of 200 pads for $6

Amazon. My only complaint about it is that it slightly covers the edges of the battery door so it makes battery changes a little more difficult. Otherwise it fits great, feels great, adds tons of protection, and isn't loose. https://www.amazon.com/dp/B07ZS8CZ46/ref=cm_sw_r_cp_apa_glt_fabc_WBKKRJ0HQMKFXAGBT0N2?_encoding=UTF8&psc=1

It'll mostly apply, Asgard Mini Nightmare 25 seem to be the favs for dual coils atm. If you get your wire and cotton from a vape site, chances are taxes will apply also. Get wire from wireoptim or badazd. For cotton, you can get organic cotton pads direct from Muji or Amazon.

https://www.amazon.com/dp/B01K3YXDPG/ref=cm_sw_r_cp_apa_glt_fabc_HPW5N2KXV08SZ059RQR0

Or this cheaper one that is identical but not coilmaster branded: https://www.amazon.com/dp/B01GO9AMDA/ref=cm_sw_r_cp_apa_glt_fabc_APYBA8FEBZXQK26JRE7R?_encoding=UTF8&psc=1

Why not get some of this and glue it to the bottom of your drip tip

Get this Amazon.com: HUIZHU EVA Multi-Functional case Carrying case Vape Carrying Bag (Black, M): Furniture & Decor , i can just feel everything breaking.

The Nitecore New i2 is gonna be a really tight fit (bays are 71mm long). Check the Xtar X2 Extended, you can get it at Xtar's official Amazon store here. The Molicel P42A are sufficient for the Fireluke M tanks.

https://www.amazon.com/Leather-Handle-Wrap/s?k=Leather+Handle+Wrap

https://www.amazon.com/TOURNA-TLG-T-Leather-Grip/dp/B00STUOJCS/ref=mp_s_a_1_4?dchild=1&keywords=Leather+Handle+Wrap&qid=1617389239&sr=8-4

It's the same stuff people use for axe handles and handlebars on bikes

Wireoptim . com specifically changed their name. They sell "heating element wire", not vape wire.

Muji pads are for cosmetics, but make great wick. You can buy a pack of MUJI Makeup Facial Soft Cut Cotton Unbleached pads for 3 cents a pad.

https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs-%EF%BD%98/dp/B01C29YFS4/ref=sr_1_3?crid=2Y7V04UFBVS46&dchild=1&keywords=muji+cotton+pads&qid=1612033547&sprefix=muji+cotton+pad%2Caps%2C196&sr=8-3

https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=sr_1_5?crid=MR2CWSBYIVQE&dchild=1&keywords=muji+cotton+pads&qid=1610079987&sprefix=muji+cotton%2Caps%2C193&sr=8-5

That's 180 Muji unbleached cotton for $6.13: that's 3 cents for a 6" square pad you will cut in 1/2" strips (so that's like 12 strips out of a 3 cent pad). Each strip is a wick for a coil.

Go to Youtube and search "rta review" (sort by upload date to get the most recent) and check them out. It's not that hard to build. If you are unsure about winding coils, you can buy premade coils.

I have that same bag of cotton. I've used cotton bacon and geek vape cotton, but this cotton works the best for me. It's really fluffy and wicks very nicely. Plus you get a shit ton for very inexpensive. $7 on amazon with prime

https://www.amazon.com/gp/product/B00VHA3ZXQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 EDIT: Not available until January 7. Still an excellent deal.

I just use a little honeywell office fan, $14 on amazon

https://smile.amazon.com/Honeywell-HT-900-TurboForce-Circulator-Black/dp/B001R1RXUG/ref=sr_1_1?ie=UTF8&qid=1493832903&sr=8-1&keywords=honeywell+fan

> Amazon

https://www.amazon.com/gp/product/B01N5TMK8I/ref=s9_acsd_al_bw_c_x_3_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-6&pf_rd_r=8A5C53GKVCDZHQYCYHA2&pf_rd_r=8A5C53GKVCDZHQYCYHA2&pf_rd_t=101&pf_rd_p=855cc669-aa12-4989-ae1b-dc...

It's only a few dollars lost with the gift card fees, but then you get a visa gift card which can be used at a local store or most online stores.

Found this on Amazon. There are tons of other options on there as well. Made from acrylic if that makes a difference.

Basic necessities for building: flush wire cutters, some kind of rod with the same inner diameter as the coils you're using (I like something like this coil rod), ceramic tweezers and/or angled tweezers, scissors, cotton.

That's what you need regardless if you're wrapping your own coils or buying ones already ready to throw in your atty. Pliers are also helpful in general, but not 100% necessary.

If you plan on wrapping your own coils as well, I would suggest a coil jig and pliers too. Not everyone uses a coil jig, but I found it was much easier making coils at the beginning with one. If you do get one, you may not need a coil rod.

A lot of options for cotton, but I love Muji pads. Puff pads are also similar, both are organic cotton pads. While it takes a little practice to know the right width to cut for your coil, its worth it for the quality (I get no break in time) and quantity you get. I bought my huge pack of Muji pads on amazon ~8 months ago, and between 2 people only half is gone.

Amazon. They have decent ones for around $40-50. I picked this one up: https://www.amazon.com/Magnasonic-Professional-Ultrasonic-Eyeglasses-MGUC500/dp/B007Q2M17K/ref=sr_1_3?gclid=Cj0KCQjwxYLoBRCxARIsAEf16-v_Bs9Kpzhoc-Ddx-DHQcb8A-hIOYLC5z1mXPnmHlSrqdUq8RscOkMaAm6NEALw_wcB&hvadid=323278111139&hvdev=t&hvlocp....

I use water and a few drops of dawn, and then run everything again with just water.

That coil you made looks really good. If you have an android phone there an app called Open camera that takes great zoom shots.

https://www.amazon.com/Pack-Amber-Boston-Round-Black/dp/B01N2WC5HP/ref=sr_1_1_sspa?crid=1VC4EIET33XWD&dchild=1&keywords=8+oz+amber+glass+bottles&qid=1599070550&sprefix=8+oz+amber+glass%2Caps%2C201&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWEs5OTRJT1JUTVBKJmVuY3J5cHRlZElkPUEwMDYyMjExMVcxRUYzSFU5MFc0NiZlbmNyeXB0ZWRBZElkPUEwNDk5Njc2TEw4UjNVM09PQVRBJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

I haven't seen anything bigger than an 8 oz bottle, so this is probably the best you can do. This way you're not freezing/thawing a jug so many times (you just take out and use one bottle at a time).

Just looked they don't have the same one I ordered on amazon, but they have a small bag for 4.99 Japanese Organic Cotton Sliver 13 Feets 100% Organic Unbleached [Made in Japan] (1 Pack) https://www.amazon.com/dp/B079QH8TLJ/ref=cm_sw_r_sms_apa_i_qvUuFbQE7TTBH This looks like the same branding I got but I got like 4x this for $9

I was only using Cotton Bacon Prime in all my RTAs. I switched to Muji Cotton Pads and it is working great and especially for the price. Here is what I got on Amazon https://www.amazon.com/Makeup-Facial-Cotton-Unbleached-180pcs/dp/B00VHA3ZXQ/ref=mp_s_a_1_3?dchild=1&keywords=muji+cotton&qid=1589687088&sprefix=muji+co&sr=8-3. Here it is direct from Muji US https://www.muji.us/store/cut-cotton-ecru-180-pcs-4549337318885.html

It's a Disney and Pixar Stained puzzle.

Tenyo DP-1000-028 Disney & Pixar Heroine Stained Art Pure White Jigsaw Puzzle (1000 Pieces) https://www.amazon.com/dp/B01LZF139M/ref=cm_sw_r_cp_apa_i_R.tNCb31J246Q

Go to an auto parts store and buy a can of spray electronics cleaner. There are two different ones, one for switches and things, and one for alternator and starter. Get the one for switches.

http://www.amazon.com/CRC-5103-Quick-Electronic-Cleaner/dp/B000BXOGNI

best I could find

Just kidding, but I'm pretty sure no one does cuz I think it'll make you cough pretty bad with spicy or pepper in your lungs.

just spend $7.50 on this and be done with it. Its organic and unbleached. http://www.amazon.com/Cotton-Labo-ORGANIC-Puff-200pc/dp/B000TCD51A/ref=sr_1_1?ie=UTF8&qid=1432913349&sr=8-1&keywords=organic+cotton+japanese

I got this about 9 months ago and have yet to use about a quarter of it. This shit lasts forever, and has so much better flavor than cotton balls.

Just a shout out to anyone who might happen to see this:

Although the testing period for our RDA mod Toolkit has finished, we are looking for Amazon customers who'd like to test out another product for free - our Ceramic Tweezers!

http://www.amazon.com/gp/product/B00SKPKKGG

If anyone is interested, please message me with your full name, shipping address, and a link to your public Amazon profile. Example:

http://www.amazon.com/gp/pdp/profile/A1V74MGUYUUFAK/ref=cm_cr_rdp_pdp

Thank you again /r/Vaping! Your constructive criticism and feedback have been SO valuable. We look forward to another positive exchange soon!

as long as you stay within the amp limit of your batteriers you are safe.

The Samsung 25rs can do 25 amps. but I rarely ever push to the max. I do 90 percent which is 22ishamps. as long as you keep your wattage below 72.5 (which is 25 amps on a .116) you will be fine. Download the Android app called "Vape Tool." It is amazing. Even has a coil calculator. You can imput the type of coil, gauge of wire and the wrap or ohms you are shooting for and it will tell you the ohms or number of wraps needed to get what you are looking for. I can hit my .25 ohms just about always. (https://play.google.com/store/apps/details?id=com.stasbar.vape_tool&amp;hl=en) <---awesome app

Mods also have a max amp limit. (sort of) Chips can only handle and deliver so much. Many have a Max amperage. Most are about 30 amps. which means if you are pulling over 30 amps the chip can not handle it. Over time you will fire your chip even if the batteries can handle it. (Most batteries can not do over 30 amps anyway. ) I could not find what your mod can actually handle but my guess it is 30.

Battery Chart to check amps of many different type of batteries.
http://i.xomf.com/ylgmr.jpg

For your peace of mind, here's their trustpilot rating - 4.8

That poor soul on 1234 Fake Street. Everybody using their address... 🤣

Imagine someone out there having a SSN like 456-78-9012. Oh man, lol.

I don't mean to laugh, but this stuff is just silly to me. And there are hardly any repercussive actions taken on these shitty people. They just get to roam around and spend other people's money. The really dumb part is, hardly any of these vendors require any sort of verification at all after purchase. Like a confirmation e-mail or anything of that sort - they just want your money, or whoever's money the card belongs to. They don't care who's actually using the card.

The last incident I had, someone used my card to purchase an 8 person safari in Turkey from a site called GetYourGuide. When it popped up on my CC, I got an alert. Quickly froze my card, and not 2 hours later, they attempted to purchase airline tickets not once, but twice. The Safari itinerary was sent to my e-mail, so I got to see the date it was scheduled for, where to meet, for how long, etc. I cancelled the trip and sent a message to their support explaining that my card info was hijacked and that I did not purchase the safari. They said expect the refund within the week. I waited 3 weeks and nothing, so I did a chargeback. No verification process at all. It's quite sad.

The first incident was for $55 at a Denny's. It was either a huge fatass, or someone treating out a bunch of their friends with my card. It makes me wonder if those friends knew they were using a stolen card. And if so, they also deserve shitty karma.

I get "currently unavailable" when I open the link. These are what I can find. Shipping to the UK.

10 mL bottles

30 mL bottles if you want something slightly bigger

Not sure where you're shipping to, but they show in stock to me.

And I'm sure, exotic pets are cool to have. Much more difficult to take care of when things aren't going so well.

I don't remember if it was you or someone else I recommended these to, but these little guys are perfect for extracting juices out of tanks/bottles for exactly what you're doing. You won't need them all the time, but they do come in handy in a pinch, and they're very inexpensive.

Precision Tip Applicator Bottles

Yeah, I understand that. The idea of grabbing on really tightly to glass has never been a good mental image of mine, especially when you're involving more things into the equation, like pliers, and then adding torque on top of that.

Using dish soap to wash your hands, and then using the suds from your hands to wipe around the glass also works to give you good grip. Just make sure not to wash the entire atty in soapy water, as you don't want those chemicals inside of your tank.

You can also get doilies made of this material https://www.amazon.com/Tonws-Non-Adhesive-Cabinets-Kitchenware-Tableware/dp/B07SQRF8SG?source=ps-sl-shoppingads-lpcontext&amp;ref_=fplfs&amp;psc=1&amp;smid=A3HCVQRS5KUPMN that will help you with jar lids, and things like gripping the glass of your atty.

Might I suggest something like this?

The grub screws for Arbiter 28mm are 2.5 X 3mm. The hex key is 1.3mm. I found them both on amazon:

(Screws](https://www.amazon.com/dp/B07D9485VX) Hex Screwdriver

The production of the original Uwell caliburn device has ceased as of the beginning of this year, however pods are still being produced.

(According to tbd liquids - a vape juice company with a partnership to them)

As for finding official uwell pods it took some scrolling on amazon link provided by the offical Uwell site.

Link to pods: https://www.amazon.co.jp/Caliburn-Replacement-Cartridge-Capacity-Ecigarette/dp/B08FWZY394/ref=mp_s_a_1_23?crid=3AHJPNSHG21AI&amp;keywords=カリバーン&amp;m=A3QMR3CN6LETJR&amp;pscroll=1&amp;qid=1664230677&amp;qu=eyJxc2MiOiI1LjA3IiwicXNhIjoiNC44MCIsInFzcC...

Also as an anecdote you’re right it happened to the the FDA sending a letter to Uwell telling them to stop sending the orginal caliburn + a few other products to the us

Link here: https://www.fda.gov/inspections-compliance-enforcement-and-criminal-investigations/warning-letters/shenzhen-uwell-technology-co-ltd-dba-dtd-distribution-inc-605075-04272020

I buy spools of wire and wrap my own. So much cheaper. I used to use coilology spools but they stopped selling them. I now use these:

https://www.amazon.co.uk/Fused-Clapton-Double-Heating-Tri-Core/dp/B07D3SBSYX/ref=mp_s_a_1_3?crid=1CBXPYC3ZYX55&amp;keywords=tri+core+fused+clapton+wire&amp;qid=1661186094&amp;sprefix=tri+core+fused+clapton%2Caps%2C80&amp;sr=8-3

Coilology still sell premade coils that are good, but I prefer to wrap my own so I can change the inner diameter accordingly.

I heard good things about u/badazd coils but he's in the States so I haven't tried them personally.

I don’t know, I used to have a pen device that looked like this: old vape

Idk what brand but it gave amazing flavour on all liquids - it just leaked & I hated screw ins as the metal would warp, making it hard to open & change.

So I feel this Voopoo should’ve been miles better than a crappy little pen but all I get is mild sweetness & nothing else :)

i dont know what is with all the negative comments, it is a disposable device with reusable parts. Its going to be thrown out otherwise, why not try and get a little bit more life out of it or reuse the battery. i was able to open one by forcing a small flathead screwdriver between the the casing and bottom of the vape until an indent was formed. I then pushed the bottom lid away from the casing using the indent until the it popped off. inside is an 18450 cell that can be recharged safely using a charging board such as https://www.amazon.com.au/Reland-Sun-Interface-Charging-Protection/dp/B08QSK5CBY/ref=sr_1_18?crid=WTBSK0R0NI18&amp;keywords=18650+charger+board&amp;qid=1658513924&amp;sprefix=18650+charger+board%2Caps%2C279&amp;sr=8-18

just connect BAT+ and - to the corresponding sides of the battery

Please stop this madness. Wire snips are not an expensive tool.

Sure: https://www.amazon.co.uk/Aromatherapy-Chamomile-Essential-Melatonin-Disposable/dp/B08V5GBVXV/ref=mp_s_a_1_3?crid=2BEM543KI5NAW&amp;keywords=aromatherapy+pen&amp;qid=1657148130&amp;sprefix=aromatherapy+pen%2Caps%2C179&amp;sr=8-3

Me too! I just ordered this one to try, can’t wait for it to come

https://www.amazon.com/Mechanical-Programmable-Typewriter-Resistant-Anti-Ghosting/dp/B07ML3DXSR/ref=mp_s_a_1_1_sspa?crid=23SAJJ30B8CKK&amp;keywords=huo+ji+typewriter&amp;qid=1655909787&amp;sprefix=huo+ji+typewriter%2Caps%2C99&amp;sr=8-1-spons&amp;...

I quit using anything with glass ever since one of my tanks busted in my pocket and embedded glass into my thigh. Switched to squonking with an rda and never considered going back to tanks since.

I use a molle radio pouch designed for use on tactical gear as a belt holster for my mod. It is made of Velcro straps, so it can be adjusted to hold anything from a mech tube all the way up to a big 4 battery mod. It also has a strap to secure the mod into the pouch if you need it, but as long as you tighten up the pouch to the mod you put in it, that strap isn't needed most of the time. I only use that strap if I am doing something that I want to make sure it is not going anywhere, like riding quads.

The pouch I use

Amazon!

Rmvaporstore Replacement Straight Glass for Vandy Vape Kylin Mini V2 3 Pack (Kylin Mini V2) https://www.amazon.co.uk/dp/B09CLGBC74/ref=cm_sw_r_cp_api_i_ZBF2KNERAB2M48GYF7RW?_encoding=UTF8&amp;psc=1

It's not a flavor monster, choking down airflow always helps, you can try raising or lowering your coil, check it when it's full juiced after building, if the flavor is bad then it's probably just gonna get worse as the rba has to wick since it won't be as fully juiced.

Some said there was a break in for cotton, like it wouldn't taste great for awhile, I don't remember it being like that, I moved to cellucotton long time ago, that definitely increases flavor, but I just like how fast it wicks and how long it lasts, plus the $23 box is a lifetime supply but they have a small box now https://www.amazon.com/Graham-Cellucotton-Beauty-Coil-Feet/dp/B001BKY3B0/ref=mp_s_a_1_2?crid=RTCDDEVLD88S&amp;keywords=cellucotton+beauty+coil&amp;qid=1654003494&amp;sprefix=Cellucott%2Caps%2C105&amp;sr=8-2

I think you've probably found out the vessel is a cloudy little bugger but flavor is kinda hard, some juices work fine and some of mine just don't have the same pop

For cotton I actually prefer cellucotton like this Graham Cellucotton Beauty Coil 100% Rayon, Regular https://www.amazon.com/dp/B00RONH4NW/ref=cm_sw_r_apan_i_ZR7MW7Y4NQFF0SVZ09GZ

I usually use stainless steel wire that's compatible with temp control on my mods with a simple spaced coil.

Good job bro, the first few builds are nerve-wracking but you'll just get better and better. Looks solid tho!

Also to piggyback off the cotton recommendation, those cottons they suggested are legit. You can't go wrong. But if you wanna save some money and get pretty much the same experience, a lot of people use Muji cotton pads. Kinda a pro tip.

Muji cotton pads are from this Japanese store that sells a pack of 360 cotton squares for like $12 bucks. They're unbleached Japanese organic cotton and you can buy them on Amazon

This may help on the drill side of things so you aren’t trying to get tiny wires into tiny slots in the chuck.

Hollow Wire Vise - 4.5 Inches Long https://www.amazon.com/dp/B0054HJ76M?ref=ppx_pop_mob_ap_share

Hmm hard to tell, I guess this is a vaporizer (mostly used for cbd/thc oil) rather than a normal vape pen. This right her might fit (Amazon link): https://www.amazon.de/Weedness-Ald-Amaze-Vape-Zigarette/dp/B07N8HCQ9W/ref=pd_aw_vtp_sccl_16/261-2377327-7133441?pd_rd_w=lFHRW&amp;pf_rd_p=43115df5-55d3-4b3d-83f0-e9b9e279ca91&amp;pf_rd_r=7TCC8CE8AF98AC8G50P4&amp;pd_rd_r=fc025b11-d928-488d-8be6-6fd...

i've got so many from where i buy carts and use them to both make up THC juice and also use CBD juice in them and never throw them away, if anyone wants any and are in the UK i'll happily post some free or charge but the guy above showed me these things which i think are well cool...i thought i'd found a gap in the market but clearly someone got there first! 🤣

I didn't see those things for pennies on Amazon, but these things work well. The ones in the link are a bit small but will do the trick. I like the larger sized ones. I got a bunch from Fasttech years ago. Some are threaded and some aren't.

I bought just 1 , this is a pack of 2, you might poke around and find it, remove the space at . Com

https://www.amazon. com/Pack-Cotton-Yacht-Refill-Screw/dp/B07PG55H7T/ref=mp_s_a_1_12?crid=TBSF24BYFUZ2&keywords=cotton+mop+head&qid=1652236649&sprefix=cotton+mop+head%2Caps%2C89&sr=8-12

Thanks man. I’ve bought a Cthulu managed to find one online. Do I need to use specific nautilus coils?

Will this work for example Aspire Nautilus BVC 0.7ohm Replacement Coils (Pack of 5) No Nicotine https://www.amazon.co.uk/dp/B06XVDS214/ref=cm_sw_r_cp_api_i_1EY2GY8ED3V4VPD1J2CB

Vape into a soldering fine extractor? I haven’t tried it with the little ones but nothing comes out of the big ones. I figure if their carbon filters catch flux vapor they can handle a bit of aerosolized glycerine easily. well solder fume extractor Beyond that just hold it in a little longer. That’s what I do in the car to avoid fogging it up since I don’t like driving windows down.

Syringes will work, but you will get more consistency and easier mixing using a cheap digital scale grams 0.01
here is one on amazon https://www.amazon.com/Smart-Weigh-Back-Lit-Features-Included/dp/B00ME8VI34/

I don't see this- Cleaning Brush w/ Jig Tool or this- Coily Tool. Especially the coily tool, makes building so much easier.

Terry cloth towels are good to have, building can be messy.

Multimeter is good thing to have too, you can test the internal resistances of your atomizers & test your batteries. Some might say that's overkill for regulated mod vaping & maybe it is, but I would say since your husband has a vaping toolbox, he's obviously serious about it, fill it up with every vape related tool he may ever need.

Embroidery scissors might work for you then. Something like this, which looks like a gimmick but honestly, they're the best I've used (and I've a few pairs now). The "nose" on the larger ones is just under an inch long and they taper to a fine enough point to poke things with.

Unless you need a longer blade, in which case I apologise, lol.

Ohhhh lmao wtf.. how bizarre! These wre the ones u want - 12 Pack 60mL Unicorn Pen LDPE Plastic Bottle Long Thin Tip - 12 Colors Childproof Cap - Free Mini Funnel Squeezable Bottles https://www.amazon.com/dp/B07DGJ3L22/ref=cm_sw_r_apan_i_GP5SPYA88HSBY45MHKGE?_encoding=UTF8&amp;psc=1

Or these if u prefer 30ml small ones - Tatuo 12 Pieces 30 ml/ 1 Ounce LDPE Plastic Thin Tip Droppers Empty Bottle Squeeze Bottle Dispense in Mixed Color with 5 Pieces Funnel for E-liquids DIY Craft https://www.amazon.com/dp/B07GF3T9MX/ref=cm_sw_r_apan_i_MFK19HVYH2VNMATBQZ9W?_encoding=UTF8&amp;psc=1

M2x3mm They also fit the Mobb if you have that. These are flatheads, which I recommend. I had nothing but problems with the hex ones.

https://www.amazon.com/dp/B07TCZX892/ref=cm_sw_r_apan_i_EZ1580TPZAYEJ6ZVBN91?_encoding=UTF8&amp;psc=1

I got I for like $6 at a local outlet store. Amazon has the same one, it's a bit more $ though. I flipped it around, glued and screwed the legs to keep them stable, drilled some holes in it and bam

Pinnacle Cookery Bamboo Spice Rack Organizer For Countertop – Eco Friendly Seasoning Organizer 3-Tier Spice Shelf – Space Saving Wooden Spice Rack https://www.amazon.com/dp/B07T8JJ9HW/ref=cm_sw_r_apan_i_P30KWMEM6BW930Y6G717