State-by-state election results are from the National Archives. It took some work getting it into a usable format, so I posted a cleaned up version of the data here
The graphics were made using D3, Photoshop, and recordit for animated screen grabs.
Yes. Here is an excerpt from that episode. (Sorry for the shit quality)
If you're in Sweden you can view the entire show here: https://www.oppetarkiv.se/video/1629195/julkalendern-1991-sunes-jul-avsnitt-3-av-24
Best Julkalender ever!
Edit: for clarification, the hit was after the play
Stay tuned i'm currently working on an app that calculates your exact ivs! Sometimes the arc is blocked by certain bigger pokemon so it also includes the feature to correct any mismatched data before submitting, here is a sneak peak of the system being used to correct the arc: http://recordit.co/lTxIfvm8pe (levels appear as popup on the bottom of the screen)
edit: some clarification, ideally the app will automagically align itself to the arc pointer and pull all the data needed for exact ivs, once the initial scan is complete however there might have been some data that failed to pull (being blocked by pokemon or the ocr just struggled) so once you scan the data will overlay your pokemon and you can make any changes required, including moving the arc pointer. Also note that the layout will NOT look like that in the video, the slider was placed there for testing purposes and on release things will be a lot more organized!
Yes, I use lock picks. I bought a pack with a transparent lock to learn to pick locks as a new hobby but then I discovered they are a perfect tool to vape. Multiple shapes for different uses. Different curvatures, different thicknesses, ... Makes it easier to clean my Pax, make it easier to grab the run out from the sides of my coils, makes it easy to load, dab, clean, ... lock picks are a vaper's best friend!
The code is from a project I'm working on right now on my spare time, written mainly in NodeJS. It's a trading algorithm editor, to make it faster to prototype new algorithms without having to actually write code. Then in a few clicks you can send the output to AWS where the data is analyzed, and a machine learning model is built, so that your algo can come to life and trade by itself. http://recordit.co/f67lE6r9m5
Sounds like it's more overhead than necessary. Why not just something simple and out of the box like http://recordit.co/? I used it all the time in QA and it was great - never got any complaints.
QA not being able to "remember" the steps is laziness and/or incompetence. It's literally their job to find and log bugs. With the use of RecordIt I was able to cut down a lot of time in writing the steps.
It's not just adding a keyword search, it makes it far faster to type in individual subreddits. Typing "r firefox" and hitting enter with this bookmark enabled with immediately take you to this subreddit, no searching required.
Edit: a recording.
Yes, using a prius and taking the proper deductions is the only way this is a viable job. The expenses can add up a fair amount, and if I had to pay self-employment tax on all the income I make, I'd probably be losing money.
Another thing is that since this is contract work we get no benefits, so I have to save up to take a vaction. And I am lucky enough to currently be on my parents insurance. Thought that wont be the case for too much longer. Not sure how the math works out for other people, but for me it is actually perfect.
Though I do have to warn for anyone interested in working here, its hard to get hours sometimes. And I have had to resort to a modestly complex (or extremely complex if your not a computer person) method of checking for hours and accepting them as fast as possible.
It looks a little something like this
Thanks very much for additional info on the codeblock copy issue! Nothing like a solid bug report!
I'd never noticed the triple-click method to reproduce this, it's been very helpful as I've investigated the issue today. The issue goes deeper than I'd imagined. I have a solution in mind, but it's probably going to be 2-3 weeks until I can push out a fix due to weird tenacity of this seemingly trivial issue.
On Ctrl+Space
, there's one other way to use it which wasn't included in my last video. You can use it to remove all styles from the text you're about to type, (5 second video demo).
I'll definitely get YAML and INI syntax highlighting in there as well!
Thanks for dropping in! I'm glad to hear you like it overall! I definitely plan to address all of these issues in the coming weeks.
This one has proven shockingly tough to fix no matter what I've tried so far. Fortunately avoiding it is pretty easy until I can fix it properly.
The issue only occurs when you copy around a codeblock (including elements before or after the codeblock in your selection)
When copying from a codeblock you can use Ctrl+A
to select the entire contents of the codeblock and then copy that selection and it will be only the text you expect.
That is super annoying. I'm going to see what I can do about this. Currently pasted text will maintain its formatting when copying to a source that can accept html formatted text, but that doesn't do you much good for pasting into an editor.
I think I have some work to do on clarifying this. Let me know if I'm not understanding this one correctly.
Right now pressing Ctrl+Space
removes styles such as:
bold
italic
strikethrough
underline
code
but it won't affect the structural formatting of the note, for example lists
, codeblocks
, checkboxes
, etc.
Here's a quick example of that feature
I plan to introduce Ctrl+Enter
to remove the structural formatting. Actually, Recollectr had it in the past, but I ran into some minor issues so I pulled it until I could work them out. Again, let me know if I misunderstood this one.
Thanks again for your feedback /u/Dani21st! I'll act on all of these issues/suggestions and see what I can do about adding YAML
syntax as well. If there are any other languages you use which aren't included let me know about those as well and I'll look into adding them too!
Unless you know exactly what the ForeignToken
contract does things can still be dangerous.
Of course, it also depends on what your contract does. Having the ReentrancyGuard
on one method alone does not guarantee that your contract is safe as there may be other potentially harmful methods which do not have the guard on them.
Simple example:
pragma solidity ^0.4.24;
contract MaliciousContract { function balanceOf() public returns (uint256) { YourContract yc = YourContract(msg.sender); yc.increment_i(); return 1; } }
contract YourContract { uint256 public i;
function increment_i() public { i++; }
function do_something(address _mc) public { MaliciousContract mc = MaliciousContract(_mc); mc.balanceOf(); } }
Here, the MaliciousContract
can increment the value of i
each time balanceOf
is called. Having the guard on just do_something
wouldn't be enough and you'd have to have the guard on increment_i
as well.
Demo: http://recordit.co/IQw386Kk2C
I guess my point is that you can't just reject the warning as a false positive without considering many other factors. I can take a quick look at your contract if you'd like but it probably won't be a formal audit for free!
interestingly enough, there is no collective at all, you have to accelerate the prop if you want more thrust, the sum of their angles is fixed.
here is a kinematic model: http://recordit.co/2cC2gBLdm3 I added 2 blades sideways, what's interesting it that the extra blade are just moving like a bell bar, they produce no differential thrust, that's what tipped me on the lack of collective.
There is an issue with the way houseShare
is calculated on like 513.
If houseFee * prize
is sufficiently large enough: houseShare
calculated will be lesser than what it should actually be because houseFee * prize
will overflow.
Screencast with proof - calcHouseShare
is the logic present in the contract and safeCalcHouseShare
is the change I'm suggesting. It is still not 100% accurate math (due to the absence of floats) but it's better.
Another not so extreme combination: prize = 21000, _houseFee = 4.
Code from the creencast:
pragma solidity 0.4.19;
contract Test {
uint16 public houseShare = 0; uint16 public prize = 21845;
function calcHouseShare (uint8 _houseFee) public { houseShare = _houseFee * prize / 1000; }
function safeCalcHouseShare (uint8 _houseFee) public { houseShare = _houseFee * (prize / 1000); } }
I actually bought the Mr. Monk's Guide to Exhaustion Codex because I find grouping enemies together and taking them all out with charge attacks to be a very good strategy, but you run out of stamina very fast.
However, I simply cannot see any difference whatsoever with it equipped. Charge attacks take the same amount of stamina. I still can't do charge attacks with minimum stamina. My stamina still regenerates at the same rate. My stamina still seems to deplete at the same rate. I really don't get it.
Something I noticed while testing was that your stamina starts regenerating as soon as you cancel out of your current animation. If you press the attack button and let the full animation go off your stamina doesn't start to fill back up until the animation is finished, unless you cancel it by running forward. Which means you can start your stamina regenerating much faster by moving out of animations early.
(http://recordit.co/cBW4md69F8)
The other Codex I bought was Carpe Diem which is EXTREMELY powerful. I had enough gems to buy the max amount of blessings (I think 4? 500 > 1500 > 2500 > 3500) before level 4. Since the God's Blessings are really the only thing worth spending gems on I suggest equipping it for the first few levels to max out blessings and then switching to a more useful Codex. It seems most people say the Vampirism one is the best, which is probably true; but it would feel cheap to me and it's really obvious what it does.
It's very frustrating that the codices are given vague tooltips given the amount of effort required to unlock them, especially when you buy one (Like Mr. Monk's) and still can't figure out what it does despite testing. I'd like to try to map out what they all do, but I think I'll lose interest pretty fast.
Are you basically asking how to record a gif like that? Searching for "screencast gif" should give you lots of options. recordit.co is the first one I found, and it looks simple enough. Haven't actually tested it, though.
Watched this to find there was actually a 5 sec. difference so it's a little more understandable but you can see he makes his move at 0:18 which is still ridiculously early. Even worse than it being just an early shot is that it was a FORCED early shot. Plenty of time to kick it out & set something up (really shitty vid quality but you can see José pop out behind a Wright screen wide open behind the arc). Watching this Team shoot itself in the foot over & over during close games is maddening.
Hi, thanks for sharing! I agree with /u/DairyBandit. Have a look at the bar path on this gif (http://recordit.co/DdwR3kmCTz). You can see that the bar path starts way out in front. You can fix this by setting up on the right position (bar over mid foot). If you check the gif I point out some other things that might help you:
1) Your gaze is looking forward and a bit up at the start. You want to keep your neck in a much more neutral position.
2) Your back doesn't look set when you start. I'd suggest dropping your hips a little bit lower so that you can feel your whole back tight and aligned.
3) On your way down your par path curves around your knees. That's because you bend your knees a tad early and they get in the way before you have cleared them with the bar.
Hope this helps!
I feel your pain.
These ad were bothering me so much that I created a Chrome Extension to wipe out all ads ( in feed and sidebar ) while scrolling. You can get the same result with Ad-blockers but this was fun nonetheless.
Gif below
http://recordit.co/1UsPdfnF0n
(Extension isn't public but can be :) )
I'm glad the additions have helped out! I hope that copy and paste is working better for you as well. I know there's still some bugs there, but is it sufficiently better that it doesn't generally interfere with you workflow?
Regarding codeblocks, you mean that the field doesn't scroll to the right as your text extends beyond the rightmost boundary of the codeblock, right? This is definitely on the todo list, but I've yet to find a way to do this gracefully. I'll bump it up a bit on the priorities list though!
In case I didn't get it right, I use Recordit for quick screen captures.
You shouldn't need any software to connect it, just for the button customization stuff. You will need to pair it in windows first.
here's a quick vid i made on pairing blutooth devices in w10 http://recordit.co/OboMhJAYNY
No actually you weren't stuck behind anyone. There was an open lane to pass in and they were going near the speed limit and primarily being slowed by the cars ahead of them and lights. OP quit your bullshit.
I found your link and my link were both not working this morning. It seems to be a link referral issue. Apparently if you copy/paste the link it works and then caches and always works, but clicking on the link from reddit doesn't work.
I think they want you to only share this link:
No, he didn't, and that's an unprovable claim. Actually, it's falsifiable: google recordit.co. It's a legitimate site.
And the link was just messed up for some reason. Here's the gif: http://recordit.co/bTWLMYaVAX
Remove the "g." from the urls. Fixed links:
<strong>Nest in new GameObject</strong>
Hey
This is interesting stuff.
I pulled up the IDE, just for an initial inspection. http://recordit.co/jWGFEdlFWL
One thing that shouted out, was that the onBlur event was not firing. So that meant selenium was yet to see the change occur.
I see you are triggering selenium.focus("id=content2"); which would presumably get around this.
I was doing some PHP Webdriver stuff the other day and I noticed a similar issue with AJAX calls. One element, that was straight up there, was not being found by id=XXX.
One thing that helped was targeting via xpath. ( perhaps it triggers more of the DOM )
How does xpath=(//div[@class='MarkdownEditor']/div[@class='content']) fair?
You're almost there!! http://recordit.co/u3ULMqbtTh
1) Highlight the cells you want this to apply to [A2:A9]
2) Conditional Formatting -- New Rule
3) Use Formula and enter =g2="f"
4) click on the Format button and set your desired formatting
5) click on "OK"
You should be able to play with the existing cells like i show in the gif i linked. and the formatting should change if it meets the condition or not.
This isn't going to quite answer your question but I'll throw it in anyway:
The best way to make high quality gifs is with photoshop (at least in my experience so far) by ripping a video from youtube or that you acquired otherwise cutting the part you want out with windows movie maker and importing it as layers in PS.
If you have photoshop or end up getting it I can provide you with a good tutorial.
edit: oh and this records your screen and makes a gif out of it or a video.
Thanks! To record it as a gif i projected my screen to my pc and then used recordit to capture the gif. I've also used screentogif in the past but that has been unstable for me lately
Hmm, I didn't realize that the emoji was being stripped out of tab delimited files too. Sorry.
In order to use data merge you have to have the file in comma separated values or tab delimited. So if both are stripping out the emoji (which i believe has something to do with the encoding) then your best bet is to keep the one that is saving it as gibberish characters and not question marks. That way you can just use a find and replace Indesign.
Also, you will need to make sure you have a font installed that uses emoji in order to display the characters properly. In my example I used Wingdings because that's the only font I had on my pc that had a smiley face.
Example: http://recordit.co/TiLnhfKzPh
You have complete control over editing every tag on your gifs! Open the extension or app, select a gif by clicking the maximize icon, then you will see an input with your tags. Click there and start typing! BOOM :)
Note you cannot currently edit on the site. This will eventually come, but that's why the apps exist.
Looks good! Great vibe and overall theme.
Agreed to the other comment, didn't like the push notification box. Personally, I never wanted get "alerts" from some website. A better option would be using an add on for email opt-in, which is an absolutely must for any eCommerce website. Always try to grow your list, nurturing and some will eventually convert to customers.
Another I noticed is that scrolling is a little glitchy, not a great experience.Should be something easy to fix.
Finally, may I ask how would you draw traffic to your new store?
Hi, this is really good! I did a bar path analysis (see gif here http://recordit.co/tuAxXesGnf and just keep in mind that the cameraperson was moving a bit). One of the best bar paths I've seen in a while. Also excellent setup.
But, since you're asking for feedback, there's one thing I did find that you could tweak. It's subtle and most obvious in your last rep. On the descent you tend towards more of a squat than a deadlift. So your back is a little upright and you are bending knees a bit early without enough hip flexion. It's minor but you can see the effect it produces. You end up having to move the bar forward to clear your knees which are in the way. When done correctly, the bar should clear your knees before the poke forward.
Hope that helps, and again, excellent form!
Great form! I might suggest that your lower back is rounding a bit. You can see a bit of a hook at the top of your bar path (see gif http://recordit.co/RgdTgvQlhx) which I'm guessing comes up because you're extending your back at the top. Maybe without the back rounding it wouldn't be there.
Apart from that, some of the better form I've seen on here for sure!
Hi there, thanks for sharing the lift! I think it's really good. I did a bar path analysis of it and found some things that I think you might want to see http://recordit.co/vvZqZtAtEk
Here's where I think you could improve:
You can see that C shape (backwards C on this) in the bar path. I mouse over it but it looks like you're starting the lift with the bar way out in front of your shins. This is why you kind of swing too far back then your hips push the bar forward at the top. Then it's rinse and repeat after the first rep.
The best thing I think you could do to improve your technique is keep the bar over your mid foot. The cue is to kind of graze your shins on the way up (just don't beat them up too much!). That should help you put much more of the energy into a clean vertical left.
Hope that helps!
Hey, thanks for sharing and nice to see you are getting feedback nice and early. I was curious after reading the comment of @UncreativeTeam and decided to get the parpath. It actually doesn't look too bad. There is indeed a tendency to drift forward with the bar but it's more throughout the whole range rather than just at the bottom. Hope it adds some value to see it. Here it is http://recordit.co/EHt7rtfOdN
Hey there, very nice work a start! @tonetone__ has already provided a lot of value so hopefully this gif of your bar path also adds something http://recordit.co/ZtuwvBLa5t
The only one other thing I'd point it is your slight tendency to bring the bar backwards with your hips on the way down. You can see this where the bar path forms a bit of a hook as you start your descent.
Hope that helps!
Hi there, thanks for sharing the lift. I hope this video analysis with a bar trace helps http://recordit.co/JewUZ0m2kK
There are two main things that I see here
1) You can see the bar trace curve forward towards the bottom of the lift. Pretty much consistent throughout. This is not a typical pattern and I think it comes about because you're parking the bar too far away from your shins. Try bring the bar back closer to your shins. And as a cue, have it pretty much brush your shins on the way up (don't do this too much though as you'll bruise and graze your shins and it's not necessary - just have it nice and close). With this correction you should be able to lift more, as you'll be channeling more of the energy into lifting the weight vertically.
2) This may actually help with (1): I think you need o look forward more, as now you are looking down at the bar throughout the lift. Try looking forward pretty much the whole time (at the bottom you can lower your gaze a bit so as not to strain your neck)
Hope that helps. Keep at it!
Thank you, that was lot more simple of a solution than I thought! I believe I got stuck on trying to follow "Rails convention." I just have to figure out the nitty gritty details now!
I am not sure if you are talking about the striped pattern or the fact that the there in a gap in the joint between the numbers and the background. I have included a short video on how I would achieve this effect. http://recordit.co/2Jmh5C2oDQ
Well gentlemen.... Today has been another bad day for the market...
Mintable is coming out still, on december 1st, regardless of how the market is. So I have like 8 days to finish what needs to be done.... so much work.
Just recently got it where you can now interact with ANY ERC-721 contract, and most of all verified contracts on etherscan. Without needing anything like an ABI, or programming experience.
Hopefully Mintable really solves a problem for our community.
Here is an example of looking up an item you just made and then interacting with it.
I usually see two main reasons for this.
Easier deployements, single files are just simpler to deploy. Some of these authors are releasing to github part of a larger project, and having a single file with no other project dependencies may make sense to them. They know they can release this file, move it around or use it in other projects without too much worry.
This practice is common in other languages - see the single file libs for c programming which highlight projects where all the code is in the header file.
Development workflows, for instance some development environments allow you to fold code, jump around sections of the same file much faster than jumping between files. For example, this is how I have structured my vimrc: http://recordit.co/YcWSmDyF2G
For some using multiple files may simply be an unproductive design pattern.
Personally I prefer to use multiple files - however we are all time poor and I would rather have access to an awesome library rather than have the author not publish it because they don't have the time to structure it to how others want.
Yep, all extensions are going to work this way. Even if the function that the Extensions serves doesn't need to communicate anything back to the server where the web app is hosted, it has to be able to connect to that server in order to render the UI, etc. It's legitimately just rendering a web page inside Tableau.
To illustrate this in a bit of an absurd way, I took the Sample Manifest File from Tableau's Extensions API Docs (here) and recorded loading Reddit into Tableau Desktop within the Superstore viz. The only changes I made to that sample manifest was to add r/https://www.reddit.com as in the <url> tags and remove the text in the <icon> tags.
So, if I wanted to build a really, really simplistic extension that just printed "Hello world" when you load it and does nothing more, I would still need to host the web app that is responsible for producing an HTML page with "Hello world" in it somewhere. When you load the .trex file, it has to be able to access that HTML page in order to show anything at all.
In overtime (2:24 mark) there was also a back court violation that no one noticed when Livingston passed the ball to Curry who wasn't all the way over half court yet. It lead to a Livingston dunk. At that point the game was pretty much over for the Cavs, but that didn't help.
Here's a potato GIF of it: http://recordit.co/epObEOd77O
Here's the steps that I have taken: http://recordit.co/ecQfQXOENb
According to this, Interactive Investor costs £120 and Charles Stanley costs £141 per annum. And I don't see Cavendish Online in the list
Hi i'm interested !, i'm studying web development in my free time i work around with unity i have 4 months of experience. I've done different projects , mobile games http://recordit.co/rnTQCDMD0D , 3d infinity runner and other prototypes . I mainly do game mechanics and other things and a little physics. I can help with your project in my free time
I worked in a 2D rhythmic game for mobile and other prototypes ,infinity runners , 2D shooters . iI'mstudying web development and in my free time i work with unity to learn new thinks . I'm interested :) This is a gif of my prototype game i worked a round in one week http://recordit.co/rnTQCDMD0D
example http://recordit.co/HIweiA0wwI
You've never seen this before if you only use Safari. In Chome we can copy an image (my right clicking on it and copying it, or by using a screen capture program like Jing) and then paste it right into facebook, Gmail, Github, or forums like Discourse.)
You've never seen this before if you only use Safari. In Chome we can copy an image (my right clicking on it and copying it, or by using a screen capture program like Jing) and then paste it right into facebook, Gmail, Github, or forums like Discourse.)
if you only use safari i guess you've never seen this. In Chome we can copy an image (my right clicking on it and copying it, or by using a screen capture program like Jing) and then paste it right into facebook, Gmail, Github, or forums like Discourse.)
Hey friend, system movement is now implemented along with local saving.
Click and hold until it turns light blue, drag to a new sector and release. If your destination is another system then the systems will switch places.
Once this happens your sector will be saved. You can exit out of the tab or browser and go back at any time to the main page to load your save.
Thanks for checking it out! The ability to move systems will be coming in the next day or two and then I'm going to work on editing all sector information (names, planet count, world tags, etc.). A general description will probably be after that. I'm not sure.
Adventure hooks and faction assets may be a while down the road but those are great ideas!
Edit: System movement is now implemented. Click and hold until it turns light blue, drag to a new sector and release.
Ok i'll have to try the reach back sooner thing. My issue with slowing down too much is that I kind of need a little hop to get the x-step right, otherwise it's awkward and puts my body in a weird position, I think because of flexibility or my thighs my legs don't smoothy pass each other.
Here's a shitty quality vid of both if that helps:
Maybe something like http://www.screentogif.com/ or http://recordit.co/ or https://giphy.com/apps/giphycapture. I had another tool at one point that could make gifs from live screen activity, can't remember what it was called.
So I got it to change via CSS by doing what you said and moving the code into my HTML file! But what I'm experiencing now is what I was trying to explain earlier - poorly, I might add.
Basically, whenever I hover over the exact element I want to change, it does. But I want my mouse to ignore ALL of those elements that are in the regions, but aren't the actual regions themselves. Whenever I hover over one of the icons or symbols, it acts as if I'm no longer hovering over the region... Like so.
No matter what I'm hovering over in that specific region, the only thing that should be 'reacting' to the mouse is the actual coloring. I'm just wondering if there's a way to only draw the 'region outlines' as svg (so they can be highlighted/manipulated) but still keep the icons/symbols inside.
.
Hey there, Firstly, thank you so very much for the Reddit Gold subscription you gifted to me yesterday. I am really glad about your warm gesture and way of appreciation. I have never used a Reddit Gold and would wonder what it means, and yesterday I found it in my inbox and it's full of loads of features. Thank you again :)
Also, to me, your site must be certainly visited by a certain audience and helping out so many seekers like me, and definitely, it's one of the best ideas that I have come across in so many years, as I have been looking for a one stop site like this that can help me to find and Work from Home or Remote Jobs options like your site does. So big-big thank you for this site and making the sincere effort to keep it up and running with the latest development in this world of Skipping the drive :)
Strangely, the URL: skipthedrive.com is still is not able to resolve the DNS and redirect me to the site. I am not a web developer Domain Expert yet, else would have loved to help you to fix it technically too.
Recent trial recorded is: http://recordit.co/UAKxLnj1xT
I also tried accessing the site on Android Smartphone and seems to give out a similar error.
However, as you would notice, the site is accessible with the alternate link you had given yesterday. But the subpages and job postings are not accessible today. A recording on that: http://recordit.co/S6bbycKCiI
Also, I could not login earlier and drop in this message, hence this delayed response.
Please let me know if you have any environment specific testing required, and I would share my PC details if it helps.
Best, Divy
.Hey there,
Thanks for your quick response again. About the availability, thanks for the mention.
About the issue: This seems to be the only site having issues. I have tried multiple browsers, same result. MS Edge: Not accessible Firefox: Not accessible Opera: Not accessible
There is a small recording I have done if it helps. http://recordit.co/xVz4o42zbB
Best, Divy
Sorry for taking so long, mate, my life has been very messy lately.
Just tried to hit that bell again and it didn't work, but then I tried what you said, to first unsubscribe and then resubscribe, and it worked just fine. Thanks for the help :)
But what's up with that, is that a common and known issue? And how should I/we interpret this? I mean, doesn't it dissuade people from getting notifications, since probably most people just give it up? I say this because the whole platform has been very unstable lately -- and I say this not just from what others have been saying but from personal experience -- and all those glitches and bugs are really influencing people's behaviors and what is trending. Any thoughts on that?
Download link for rmskin (Skins + Wallpapers): http://www.deviantart.com/download/663394380/into_space___rainmeter_layout_by_giobonvi-dayyudo.rmskin?token=d0722b3b0ed19c5f835be2526d1e80947de78129&ts=1487414901
Preview animation: http://recordit.co/GNmcyPpHnS
See 2012-2015 - roșu și galben
> Transferurile de la Guvern către consiliile județene din Fondul de Rezervă, Programul Național pentru Dezvoltare Locală și alte fonduri gestionate de Ministerul Dezvoltării Regionale și Administrației publice (MDRAP) - normate la populație.
So I use a multi-step approach, demo: http://recordit.co/GvoFm6bDRq
strtotime
on it, and returns the date in a common formatI like this approach because strtotime
can be confused (some dates are ambiguous), and this way the user sees what they're getting.
haha. why would you delete your original comment that you fuckin' love my work ? I left a prove on that thread but just in case you didn't see. Here's a prove. And I would consider as a compliment that you really like my work so that you can't even believe :P http://recordit.co/RMOAwythDj
Hey TLOS - if you're an existing perpetual Kayako Download customer, you can get up to 75% off any of the new Kayako plans. You can find out more about your options and how migration will work if you log in to your https://my.kayako.com.
In the new Kayako, we've dropped KQL in place of predefined, rich reports. We've looked at the reports customers pull most often and built those (http://recordit.co/LZDRseRuLO). We'll be adding advanced insights this year, with gooddata.com powering the backend.
Regarding search, we feel you. We've rebuilt it, based on ElasticSearch. It is fast, relevant and universal, and supports a host of search parameters: https://support.kayako.com/article/1164-getting-more-out-of-kayako-s-search
Hope this is of interest...
Yes! All good! Although.. it should show your username. Like this: http://recordit.co/fvOBVJ93Th
You'll receive an item in your inventory by September that'll unlock all phases of the game for free (alpha, beta, release). Thanks again :)
I edited a picture of a special-edition printing of The Wicked and The Divine Hardback 1 and used rainmeter to achieve this: http://recordit.co/aw8y7a6oAx
Took a weekend to set up, learning to use Rainmeter and GIMP, but IMO it was totally worth it.
Did you manually enter in exercise? I can consistently reproduce a gazillion steps that way. Screengrab of it here: http://recordit.co/yURdG501KF
I sent a bug report to Fitbit and they said they would look at it.
Selling
Global Account
Semi-Fresh
254 Stones
ANDROID
Payment: Bitcoins (If you play ExtaliaMs i also except trades for stuff there)
Price: Offer
I use Screenflow, but it's not free. Also needs an extra tool to convert video to gif. This looks cool though: http://recordit.co/
Edit: Just tried it out - free version limited to 4 FPS
That's good, CF always makes hte most problems for me :)
Well, I don't get what's your error, maybe that will help?
b2=IFERROR(OFFSET(B2;-1;0)+1;1)
If not, then I don't know how to help, that formula works great in my sheet o_0 gif
If you are not able to watch the vid;
1) search "random.dat" in your start menu
2) right click on it and select properties
3) check "read only"
I've spent the morning just working on some clean up stuff, both visually and internally. I had some bugs in my layout that didn't let me rescale it, so it was hard to line it up in the editor with the UI, but I solve those. I also replaced the toggling of sprites on and off with fading the lights on and off, learning to use some coroutines in C# to animate that.
The next week will be spent working on lots of widgets, like the level selector and the level progress widget, and working on lots of "shell" stuff like that.
If you have your decks in advanced mode, in the bottom tab, if you switch to 'move' you can set to move your loop by your loop size. So the way I usually do it is make a loop right at the start of my drop of whatever size I want (8 or 16 or 32) and then move the entire loop back the same amount (4 bar loop, move it back 4 bars, 8 bar loop, move it back 8 bars, etc)